1. 11 Aug, 2006 2 commits
  2. 10 Aug, 2006 2 commits
  3. 09 Aug, 2006 1 commit
  4. 07 Aug, 2006 1 commit
  5. 03 Aug, 2006 1 commit
  6. 01 Aug, 2006 1 commit
  7. 28 Jul, 2006 1 commit
  8. 27 Jul, 2006 3 commits
  9. 26 Jul, 2006 1 commit
  10. 23 Jul, 2006 1 commit
  11. 22 Jul, 2006 1 commit
  12. 21 Jul, 2006 19 commits
  13. 19 Jul, 2006 6 commits
    • Wolfgang Denk's avatar
      Add support for high-boot on TQM5200 and TQM5200S boards. · 978b1096
      Wolfgang Denk authored
      Hint: the CPLD on the TQM5200 must be programmed with a software
      version supporting the high boot option! The new TQM5200S is
      already supporting this option. On the TQM5200 this option will be
      supported in configurations with MPC5200 rev B processors.
      
      To actually "high boot", set jumper X30 on the STK52xx.
      
      Patch by Martin Krause, 12 Jul 2006
      978b1096
    • Wolfgang Denk's avatar
      Add support for new TQM5200 revisions · 45a212c4
      Wolfgang Denk authored
      - Support for TQM5200S (short version without graphic controller)
      - Support for modules with 'N' type S29GL128N Spansion flashes
        (requires changes to flash layout)
      - Support for MPC5200B cpu (mostly support for second SDRAM bank)
      45a212c4
    • Wolfgang Denk's avatar
      Fix support for PS/2 keyboard on TQM85xx boards · bd3143f0
      Wolfgang Denk authored
      The PS/2 keyobard driver for the TQM85xx modules only supports the
      internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
      include a DUART, the TQM8560 modules can't be used with the PS/2
      keyboard controller on the STK85xx board.
      The PS/2 keyboard driver should work with the modules TQM8540,
      TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
      
      Make sure the PS/2 controller on the STK85xx is programmed. Jumper
      settings: X66 1-2, 9-10; X61 2-3
      
      Patch by Martin Krause, 21 Jun 2006
      bd3143f0
    • Wolfgang Denk's avatar
      Adjust RTC century handling on STK52xx board to match Linux driver. · edd0b509
      Wolfgang Denk authored
      Patch by Martin Krause, 12 Jun 2006
      edd0b509
    • Wolfgang Denk's avatar
      Adjust filenames for USB update images on TRAB board. · c786f427
      Wolfgang Denk authored
      During an automatic update via USB stick, U-Boot searches for
      images with the name "firmware.img" and "kernel.img". This names
      are now changed to "firmw_01.img" and "kernl_01.img". This is done,
      to prevent updates of new boards (with the new macronics "c" step
      flashes) with old, incompatible firmware or kernel versions.
      Patch by Martin Krause, 21 Jun 2006
      c786f427
    • Wolfgang Denk's avatar
      Bugfix in VFD routine on TRAB board. · d053ce62
      Wolfgang Denk authored
      Make sure upper lext pixel can be set to blue, too
      (so far only red was possible).
      Patch by Martin Krause, 15 Feb 2006
      d053ce62