1. 04 May, 2015 1 commit
    • Shengzhou Liu's avatar
      powerpc/t1023rdb: Add T1023 RDB board support · e8a7f1c3
      Shengzhou Liu authored
      
      
      T1023RDB is a Freescale Reference Design Board that hosts the T1023 SoC.
      
      T1023RDB board Overview
      -----------------------
      - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz
      - CoreNet fabric supporting coherent and noncoherent transactions with
        prioritization and bandwidth allocation
      - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC
      - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
      - Ethernet interfaces:
        - one 1G RGMII port on-board(RTL8211F PHY)
        - one 1G SGMII port on-board(RTL8211F PHY)
        - one 2.5G SGMII port on-board(AQR105 PHY)
      - PCIe: Two Mini-PCIe connectors on-board.
      - SerDes: 4 lanes up to 10.3125GHz
      - NOR:  128MB S29GL01GS110TFIV10 Spansion NOR Flash
      - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash
      - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash.
      - USB: one Type-A USB 2.0 port with internal PHY
      - eSDHC: support SD/MMC card and eMMC on-board
      - 256Kbit M24256 I2C EEPROM
      - RTC: Real-time clock DS1339 on I2C bus
      - UART: one serial port on-board with RJ45 connector
      - Debugging: JTAG/COP for T1023 debugging
      
      As well updated T1024RDB to add T1023RDB.
      Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      [York Sun: fix defconfig files]
      Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
      e8a7f1c3
  2. 05 Dec, 2014 1 commit
    • Shengzhou Liu's avatar
      powerpc/t1024rdb: Add T1024 RDB board support · 48c6f328
      Shengzhou Liu authored
      
      
      T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC.
      
      T1024RDB board Overview
      -----------------------
      - T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
      - CoreNet fabric supporting coherent and noncoherent transactions with
        prioritization and bandwidth allocation
      - 32-/64-bit DDR3L SDRAM memory controller with ECC and interleaving support
      - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
      - Ethernet interfaces:
        - Two 10M/100M/1G RGMII ports on-board
        - one 10Gbps XFI interface
      - PCIe: Three PCIe controllers: one PCIe Slot and two Mini-PCIe connectors.
      - SerDes: 4 lanes up to 10.3125GHz
      - IFC: 128MB NOR Flash, 512MB NAND Flash and CPLD
      - eSPI: 64MB N25Q512 SPI flash.
      - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
      - USB: Two  Type-A USB2.0 ports with internal PHY
      - eSDHC: Support SD, SDHC, SDXC and MMC/eMMC
      - I2C: Four I2C controllers
      - UART: Two UART serial ports
      Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      [York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
      	   Fix Kconfig by adding SUPPORT_SPL]
      Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
      48c6f328
  3. 07 Mar, 2014 1 commit
    • Shengzhou Liu's avatar
      powerpc/t2080rdb: Add T2080PCIe-RDB board support · 8d67c368
      Shengzhou Liu authored
      
      
      T2080PCIe-RDB is a Freescale Reference Design Board that hosts the T2080 SoC.
      It works in two mode: standalone mode and PCIe endpoint mode.
      
      T2080PCIe-RDB Feature Overview
      ------------------------------
      Processor:
       - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
      DDR Memory:
       - Single memory controller capable of supporting DDR3 and DDR3-LP devices
       - 72bit 4GB DDR3-LP SODIMM in slot
      Ethernet interfaces:
       - Two 10M/100M/1G RGMII ports on-board
       - Two 10Gbps SFP+ ports on-board
       - Two 10Gbps Base-T ports on-board
      Accelerator:
       - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
      SerDes 16 lanes configuration:
       - SerDes-1 Lane A-B: to two 10G XFI fiber (MAC9 & MAC10)
       - SerDes-1 Lane C-D: to two 10G Base-T (MAC1 & MAC2)
       - SerDes-1 Lane E-H: to PCIe Goldfinger (PCIe4 x4, Gen3)
       - SerDes-2 Lane A-D: to PCIe Slot (PCIe1 x4, Gen2)
       - SerDes-2 Lane E-F: to C293 secure co-processor (PCIe2 x2)
       - SerDes-2 Lane G-H: to SATA1 & SATA2
      IFC/Local Bus:
       - NOR:  128MB 16-bit NOR flash
       - NAND: 512MB 8-bit NAND flash
       - CPLD: for system controlling with programable header on-board
      eSPI:
       - 64MB N25Q512 SPI flash
      USB:
       - Two USB2.0 ports with internal PHY (both Type-A)
      PCIe:
       - One PCIe x4 gold-finger
       - One PCIe x4 connector
       - One PCIe x2 end-point device (C293 Crypto co-processor)
      SATA:
       - Two SATA 2.0 ports on-board
      SDHC:
       - support a TF-card on-board
      I2C:
       - Four I2C controllers.
      UART:
       - Dual 4-pins UART serial ports
      Signed-off-by: default avatarShengzhou Liu <Shengzhou.Liu@freescale.com>
      Reviewed-by: default avatarYork Sun <yorksun@freescale.com>
      8d67c368
  4. 24 Jul, 2013 1 commit
  5. 30 Sep, 2011 2 commits
  6. 13 Apr, 2010 1 commit
  7. 09 Aug, 2009 1 commit
    • Ilya Yanok's avatar
      mxc-mmc: sdhc host driver for MX2 and MX3 proccessor · ba3dbaf2
      Ilya Yanok authored
      
      
      This is a port of Linux driver for SDHC host controller hardware
      found on Freescale's MX2 and MX3 processors. Uses new generic MMC
      framework (CONFIG_GENERIC_MMC) and it looks like there are some
      problems with a framework (at least on LE cpus). Some of these
      problems are addressed in the following patches.
      Signed-off-by: default avatarIlya Yanok <yanok@emcraft.com>
      ba3dbaf2
  8. 18 Apr, 2004 1 commit
  9. 14 Dec, 2000 1 commit
  10. 12 Nov, 2000 1 commit