README.JFFS2_NAND 892 Bytes
Newer Older
1 2
JFFS2 NAND support:

3
To enable, use the following #define in the board configuration file:
4 5 6 7

#define CONFIG_JFFS2_NAND 1

Configuration of partitions is similar to how this is done in  U-Boot
Wolfgang Denk's avatar
Wolfgang Denk committed
8
for  JFFS2  on top NOR flash. If a single partition is used, it can be
9 10 11 12 13 14 15
configured using the following #defines in the configuration file:

#define CONFIG_JFFS2_NAND_DEV 0			/* nand device jffs2 lives on */
#define CONFIG_JFFS2_NAND_OFF 0			/* start of jffs2 partition */
#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024	/* size of jffs2 partition */

If more than a single partition is desired, the user can define a
16
CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
17 18 19 20 21 22 23 24

	struct part_info* jffs2_part_info(int part_num)

function in a board-specific module. An example of such function is
available in common/cmd_jffs2.c

The default configuration for the DAVE board has a single JFFS2
partition of 2 MB size.