README.fsl-esdhc 926 Bytes
Newer Older
1
Freescale esdhc-specific options
2

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
	- CONFIG_FSL_ESDHC_ADAPTER_IDENT
		Support Freescale adapter card type identification. This is implemented by
		operating Qixis FPGA relevant registers. The STAT_PRES1 register has SDHC
		Card ID[0:2] bits showing the type of card installed in the SDHC Adapter Slot.

		SDHC Card ID[0:2]	Adapter Card Type
		0b000			reserved
		0b001			eMMC Card Rev4.5
		0b010			SD/MMC Legacy Card
		0b011			eMMC Card Rev4.4
		0b100			reserved
		0b101			MMC Card
		0b110			SD Card Rev2.0/3.0
		0b111			No card is present
	- CONFIG_SYS_FSL_ESDHC_LE
		ESDHC IP is in little-endian mode. Accessing ESDHC registers can be
		determined by ESDHC IP's endian mode or processor's endian mode.
	- CONFIG_SYS_FSL_ESDHC_BE
		ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined
		by ESDHC IP's endian mode or processor's endian mode.

	- CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.