• Peng Fan's avatar
    arm: imx: add i.MX6ULL 14x14 EVK board support · 55a42b33
    Peng Fan authored
    
    
    Add i.MX6ULL EVK board support:
    Add device tree file, which is copied from NXP Linux.
    Enabled DM_MMC, DM_GPIO, DM_I2C, DM_SPI, PINCTRL, DM_REGULATOR.
    The uart iomux settings are still keeped in board file.
    
    Boot Log:
    U-Boot 2016.09-rc1-00366-gbb419ef-dirty (Aug 11 2016 - 13:08:58 +0800)
    
    CPU:   Freescale i.MX6ULL rev1.0 at 396MHz
    CPU:   Commercial temperature grade (0C to 95C) at 15C
    Reset cause: POR
    Model: Freescale i.MX6 ULL 14x14 EVK Board
    Board: MX6ULL 14x14 EVK
    DRAM:  512 MiB
    MMC:   initialized IMX pinctrl driver
    FSL_SDHC: 0, FSL_SDHC: 1
    In:    serial
    Out:   serial
    Err:   serial
    Net:   CPU Net Initialization Failed
    No ethernet found.
    Hit any key to stop autoboot:  0
    => mmc dev 1
    switch to partitions #0, OK
    mmc1 is current device
    
    Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
    Cc: Stefano Babic <sbabic@denx.de>
    55a42b33