• Heiko Schocher's avatar
    arm,davinci: update for enbw_cmc board · 14b9f16c
    Heiko Schocher authored
    - change gpio pin settings:
    
      - gpio pin 6[13] (PLC reset) default value low
      - gpio pin 6[0] (TPM reset) default value low
      - 4 new GPIO pins
          pin  i/o   name
        - 3[9] input Board Type
        - 2[7] input HW-ID0
        - 2[6] input HW-ID1
        - 2[3] input HW-ID2
    
    - read board type and hw id from gpio pins on the enbw_cmc board,
      and use board type for setting up different gpio pin settings.
    
    - do not pass "davinci_mmc.use_dma=0" to linux, as MMC now
      works with DMA.
    
    - update logbuf support:
      store post word in RTC scratch register
    
    - add support for configuring KSZ8864RMN switch through
      a config file on u-boot startup. For more infos see:
      doc/README.switch_config
    Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
    Cc: Wolfgang Denk <wd@denx.de>
    Cc: Tom Rini <tom.rini@gmail.com>
    Cc: Christian Riesch <christian.riesch@omicron.at>
    Cc: Sandeep Paulraj <s-paulraj@ti.com>
    14b9f16c
README.switch_config 848 Bytes