• Stefan Roese's avatar
    x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support · 82ceba2c
    Stefan Roese authored
    
    
    This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
    installed on the congatec Qseven 2.0 evaluation carrier board
    (conga-QEVAL).
    
    Its port is very similar to the MinnowboardMAX port and also uses
    the Intel FSP as described in doc/README.x86.
    
    Currently supported are the following interfaces / devices:
    - UART (via Winbond legacy SuperIO chip on carrier board)
    - Ethernet (PCIe Intel I210 / E1000)
    - SPI including SPI NOR as boot-device
    - USB 2.0
    - SATA via U-Boot SCSI IF
    - eMMC
    - Video (HDMI output @ 800x600)
    - PCIe
    
    Not supported yet is:
    - I2C
    - USB 3.0
    
    Signed-off-by: default avatarStefan Roese <sr@denx.de>
    Cc: Simon Glass <sjg@chromium.org>
    Cc: Bin Meng <bmeng.cn@gmail.com>
    Reviewed-by: default avatarBin Meng <bmeng.cn@gmail.com>
    82ceba2c