Skip to content
  • Priyanka Jain's avatar
    powerpc/t104xrdb: Add T1042RDB_PI board support · 0d7ba2ea
    Priyanka Jain authored
    
    
    T1042RDB_PI is Freescale Reference Design Board supporting the T1042
    QorIQ Power Architecture™ processor. T1042 is a reduced personality
    of T1040 SoC without Integrated 8-port Gigabit. The board is designed
    with low power features targeted for Printing Image Market.
    
    T1042RDB_PI is  similar to T1040RDB board with few differences like
    it has video interface, supports T1042 personality
    
     T1042RDB_PI board Overview
     -----------------------
     - Four e5500 cores, each with a private 256 KB L2 cache
     - 256 KB shared L3 CoreNet platform cache (CPC)
     - Interconnect CoreNet platform
     - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
       support
     - Data Path Acceleration Architecture (DPAA) incorporating acceleration
     for the following functions:
        -  Packet parsing, classification, and distribution
        -  Queue management for scheduling, packet sequencing, and congestion
        	management
        -  Cryptography Acceleration
        - RegEx Pattern Matching Acceleration
        - IEEE Std 1588 support
        - Hardware buffer management for buffer allocation and deallocation
     - Ethernet interfaces
        - Two on-board RGMII 10/100/1G ethernet ports.
     - SERDES Connections, 8 lanes supporting:
          — PCI
          — SATA 2.0
     - DDR Controller 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and
       Interleaving
     -IFC/Local Bus
         - NAND flash: 1GB 8-bit NAND flash
         - NOR: 128MB 16-bit NOR Flash
     - Ethernet
         - Two on-board RGMII 10/100/1G ethernet ports.
         - PHY #0 remains powered up during deep-sleep
     - CPLD
     - Clocks
         - System and DDR clock (SYSCLK, “DDRCLK”)
         - SERDES clocks
     - Video
         - DIU supports video at up to 1280x1024x32bpp
         - HDMI connector
     - Power Supplies
     - USB
         - Supports two USB 2.0 ports with integrated PHYs
         - Two type A ports with 5V@1.5A per port.
     - SDHC
         - SDHC/SDXC connector
     - SPI
         - On-board 64MB SPI flash
     - I2C
         - Device connected: EEPROM, thermal monitor, VID controller, RTC
     - Other IO
        - Two Serial ports
        - ProfiBus port
        - Four I2C ports
    
    Signed-off-by: default avatarPoonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
    Signed-off-by: default avatarPriyanka Jain <Priyanka.Jain@freescale.com>
    0d7ba2ea