Commit 0750701a authored by Hannes Schmelzer's avatar Hannes Schmelzer Committed by Stefano Babic

driver/net/fec: support fixed speed connection

If MAC is directly connected to another MAC (like a switch for example)
we don't need to probe for a phy, autoneogation and so on. We simply
have to setup speed.
Signed-off-by: default avatarHannes Schmelzer <oe5hpm@oevsv.at>
Acked-by: default avatarJoe Hershberger <joe.hershberger@ni.com>
parent a32b4a03
......@@ -27,6 +27,11 @@ CONFIG_FEC_MXC_PHYADDR
Optional, selects the exact phy address that should be connected
and function fecmxc_initialize will try to initialize it.
CONFIG_FEC_FIXED_SPEED
Optional, selects a fixed speed on the MAC interface without asking some
phy. This is usefull if there is a direct MAC <-> MAC connection, for
example if the CPU is connected directly via the RGMII interface to a
ethernet-switch.
Reading the ethaddr from the SoC eFuses:
if CONFIG_FEC_MXC is defined and the U-Boot environment does not contain the
......
......@@ -233,6 +233,7 @@ static int miiphy_restart_aneg(struct eth_device *dev)
return ret;
}
#ifndef CONFIG_FEC_FIXED_SPEED
static int miiphy_wait_aneg(struct eth_device *dev)
{
uint32_t start;
......@@ -260,6 +261,7 @@ static int miiphy_wait_aneg(struct eth_device *dev)
return 0;
}
#endif /* CONFIG_FEC_FIXED_SPEED */
#endif
static int fec_rx_task_enable(struct fec_priv *fec)
......@@ -502,6 +504,8 @@ static int fec_open(struct eth_device *edev)
}
speed = fec->phydev->speed;
}
#elif CONFIG_FEC_FIXED_SPEED
speed = CONFIG_FEC_FIXED_SPEED;
#else
miiphy_wait_aneg(edev);
speed = miiphy_speed(edev->name, fec->phy_id);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment