Commit 0764f24a authored by Bin Meng's avatar Bin Meng Committed by Tom Rini

net: Move CONFIG_RTL8169 to Kconfig

Introduce CONFIG_RTL8169 in Kconfig and move over boards' defconfig
to use that.
Signed-off-by: default avatarBin Meng <bmeng.cn@gmail.com>
Acked-by: default avatarStephen Warren <swaren@nvidia.com>
Acked-by: default avatarJoe Hershberger <joe.hershberger@ni.com>
parent 86e9dc86
......@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_RTL8169=y
CONFIG_PCI_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA20_SLINK=y
......
......@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_RTL8169=y
CONFIG_PCI_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA20_SLINK=y
......
......@@ -27,6 +27,7 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_RTL8169=y
CONFIG_DM_PCI=y
CONFIG_DM_RTC=y
CONFIG_SYS_NS16550=y
......
......@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_RTL8169=y
CONFIG_PCI_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA114_SPI=y
......
......@@ -29,6 +29,7 @@ CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_RTL8169=y
CONFIG_DM_PCI=y
CONFIG_DM_RTC=y
CONFIG_DEBUG_UART=y
......
......@@ -14,6 +14,7 @@ CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_RTL8169=y
CONFIG_PCI_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA114_SPI=y
......
......@@ -15,6 +15,7 @@ CONFIG_CMD_GPIO=y
# CONFIG_CMD_NFS is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_RTL8169=y
CONFIG_PCI_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_TEGRA20_SFLASH=y
......
......@@ -108,6 +108,12 @@ config RTL8139
This driver supports Realtek 8139 series fast ethernet family of
PCI chipsets/adapters.
config RTL8169
bool "Realtek 8169 series Ethernet controller driver"
help
This driver supports Realtek 8169 series gigabit ethernet family of
PCI/PCIe chipsets/adapters.
config XILINX_AXIEMAC
depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
select PHYLIB
......
......@@ -63,9 +63,6 @@
#define CONFIG_PCI_PNP
#define CONFIG_CMD_PCI
/* PCI networking support */
#define CONFIG_RTL8169
/* General networking support */
#define CONFIG_CMD_DHCP
......
......@@ -66,9 +66,6 @@
#define CONFIG_PCI_PNP
#define CONFIG_CMD_PCI
/* PCI networking support */
#define CONFIG_RTL8169
/* General networking support */
#define CONFIG_CMD_DHCP
......
......@@ -10,6 +10,4 @@
#include <configs/x86-common.h>
#include <configs/x86-chromebook.h>
#define CONFIG_RTL8169
#endif /* __CONFIG_H */
......@@ -60,9 +60,6 @@
#define CONFIG_PCI_PNP
#define CONFIG_CMD_PCI
/* PCI networking support */
#define CONFIG_RTL8169
/* General networking support */
#define CONFIG_CMD_DHCP
......
......@@ -20,7 +20,6 @@
#define CONFIG_SMSC_LPC47M
#define CONFIG_PCI_PNP
#define CONFIG_RTL8169
#define CONFIG_STD_DEVICES_SETTINGS "stdin=usbkbd,vga,serial\0" \
"stdout=vga,serial\0" \
"stderr=vga,serial\0"
......
......@@ -56,9 +56,6 @@
#define CONFIG_PCI_PNP
#define CONFIG_CMD_PCI
/* PCI networking support */
#define CONFIG_RTL8169
/* General networking support */
#define CONFIG_CMD_DHCP
......
......@@ -124,9 +124,6 @@
#endif /* CONFIG_CMD_PCI */
#if defined(CONFIG_CMD_NET)
/*
#define CONFIG_RTL8169
*/
/* AX88796L Support(NE2000 base chip) */
#define CONFIG_DRIVER_AX88796L
#define CONFIG_DRIVER_NE2000_BASE 0xA4100000
......
......@@ -148,9 +148,6 @@
#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
/* Network device (RTL8169) support */
#define CONFIG_RTL8169
/* ENV setting */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_OVERWRITE 1
......
......@@ -58,9 +58,6 @@
#define CONFIG_PCI_PNP
#define CONFIG_CMD_PCI
/* PCI networking support */
#define CONFIG_RTL8169
/* General networking support */
#define CONFIG_CMD_DHCP
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment