Commit 0efc0249 authored by Simon Glass's avatar Simon Glass

spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node

This allows us to put the SPI flash chip inside the SPI interface node,
with U-Boot finding the correct bus and chip select automatically.
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
parent 7b3efc66
......@@ -135,8 +135,7 @@ int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob)
*/
int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob)
{
dev->spi = spi_setup_slave_fdt(blob, dev->parent_node,
dev->cs, dev->max_frequency, 0);
dev->spi = spi_setup_slave_fdt(blob, dev->parent_node, dev->node);
if (!dev->spi) {
debug("%s: Could not setup SPI slave\n", __func__);
return -1;
......
......@@ -285,16 +285,13 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
}
#endif /* CONFIG_OF_CONTROL */
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
{
struct spi_slave *spi;
struct spi_flash *flash = NULL;
u8 idcode[5];
int ret;
/* Setup spi_slave */
spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
if (!spi) {
printf("SF: Failed to set up slave\n");
return NULL;
......@@ -358,6 +355,26 @@ err_claim_bus:
return NULL;
}
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
struct spi_slave *spi;
spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
return spi_flash_probe_slave(spi);
}
#ifdef CONFIG_OF_SPI_FLASH
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node)
{
struct spi_slave *spi;
spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
return spi_flash_probe_slave(spi);
}
#endif
void spi_flash_free(struct spi_flash *flash)
{
spi_free_slave(flash->spi);
......
......@@ -529,18 +529,18 @@ static int process_nodes(const void *blob, int node_list[], int count)
* @param node SPI peripheral node to use
* @return 0 if ok, -1 on error
*/
struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
unsigned int cs, unsigned int max_hz, unsigned int mode)
struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
int spi_node)
{
struct spi_bus *bus;
unsigned int i;
for (i = 0, bus = spi_bus; i < bus_count; i++, bus++) {
if (bus->node == node)
return spi_setup_slave(i, cs, max_hz, mode);
if (bus->node == spi_node)
return spi_base_setup_slave_fdt(blob, i, slave_node);
}
debug("%s: Failed to find bus node %d\n", __func__, node);
debug("%s: Failed to find bus node %d\n", __func__, spi_node);
return NULL;
}
......
......@@ -5,6 +5,7 @@
*/
#include <common.h>
#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
......@@ -37,3 +38,21 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
return ptr;
}
#ifdef CONFIG_OF_SPI
struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
int node)
{
int cs, max_hz, mode = 0;
cs = fdtdec_get_int(blob, node, "reg", -1);
max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 100000);
if (fdtdec_get_bool(blob, node, "spi-cpol"))
mode |= SPI_CPOL;
if (fdtdec_get_bool(blob, node, "spi-cpha"))
mode |= SPI_CPHA;
if (fdtdec_get_bool(blob, node, "spi-cs-high"))
mode |= SPI_CS_HIGH;
return spi_setup_slave(busnum, cs, max_hz, mode);
}
#endif
......@@ -276,6 +276,7 @@
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 50000000
#define EXYNOS5_SPI_NUM_CONTROLLERS 5
#define CONFIG_OF_SPI
#endif
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
......
......@@ -259,13 +259,24 @@ static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
* spi_free_slave() to free it later.
*
* @param blob: Device tree blob
* @param node: SPI peripheral node to use
* @param cs: Chip select to use
* @param max_hz: Maximum SCK rate in Hz (0 for default)
* @param mode: Clock polarity, clock phase and other parameters
* @param slave_node: Slave node to use
* @param spi_node: SPI peripheral node to use
* @return pointer to new spi_slave structure
*/
struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
unsigned int cs, unsigned int max_hz, unsigned int mode);
struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
int spi_node);
/**
* spi_base_setup_slave_fdt() - helper function to set up a SPI slace
*
* This decodes SPI properties from the slave node to determine the
* chip select and SPI parameters.
*
* @blob: Device tree blob
* @busnum: Bus number to use
* @node: Device tree node for the SPI bus
*/
struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
int node);
#endif /* _SPI_H_ */
......@@ -67,6 +67,19 @@ struct spi_flash {
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
/**
* Set up a new SPI flash from an fdt node
*
* @param blob Device tree blob
* @param slave_node Pointer to this SPI slave node in the device tree
* @param spi_node Cached pointer to the SPI interface this node belongs
* to
* @return 0 if ok, -1 on error
*/
struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
int spi_node);
void spi_flash_free(struct spi_flash *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment