Commit 10343403 authored by York Sun's avatar York Sun

powerpc: QEMU_E500: Remove macro CONFIG_QEMU_E500

Replace CONFIG_QEMU_E500 with ARCH_QEMU_E500 in Kconfig and
clean up existing macros.
Signed-off-by: default avatarYork Sun <york.sun@nxp.com>
parent b41f192b
......@@ -186,6 +186,7 @@ config TARGET_P2041RDB
config TARGET_QEMU_PPCE500
bool "Support qemu-ppce500"
select ARCH_QEMU_E500
select PHYS_64BIT
config TARGET_T102XQDS
......@@ -345,6 +346,9 @@ config ARCH_P5020
config ARCH_P5040
bool
config ARCH_QEMU_E500
bool
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
......
......@@ -105,7 +105,7 @@ obj-y += cpu.o
obj-y += cpu_init.o
obj-y += cpu_init_early.o
obj-y += interrupts.o
ifneq ($(CONFIG_QEMU_E500),y)
ifneq ($(CONFIG_ARCH_QEMU_E500),y)
obj-y += speed.o
endif
obj-y += tlb.o
......
......@@ -404,7 +404,7 @@ void mpc85xx_reginfo(void)
phys_size_t initdram(int board_type)
{
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \
defined(CONFIG_QEMU_E500)
defined(CONFIG_ARCH_QEMU_E500)
return fsl_ddr_sdram_size();
#else
return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
......
......@@ -97,7 +97,7 @@ void cpu_init_early_f(void *fdt)
/* gd area was zeroed during startup */
#ifdef CONFIG_QEMU_E500
#ifdef CONFIG_ARCH_QEMU_E500
/*
* CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems,
* so we need to populate it before it accesses it.
......
......@@ -311,7 +311,7 @@ l2_disabled:
#endif
mtspr HID0,r0
#if !defined(CONFIG_E500MC) && !defined(CONFIG_QEMU_E500)
#if !defined(CONFIG_E500MC) && !defined(CONFIG_ARCH_QEMU_E500)
li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
mfspr r3,PVR
andi. r3,r3, 0xff
......
......@@ -850,7 +850,7 @@ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 3
#define CONFIG_SYS_FSL_SEC_IDX_OFFSET 0x20000
#elif defined(CONFIG_QEMU_E500)
#elif defined(CONFIG_ARCH_QEMU_E500)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xe0000000
......
......@@ -15,7 +15,6 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_QEMU_E500
#undef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */
......
......@@ -3689,7 +3689,6 @@ CONFIG_PXA_VIDEO
CONFIG_P_CLK_FREQ
CONFIG_QBMAN_CLK_DIV
CONFIG_QE
CONFIG_QEMU_E500
CONFIG_QEMU_MIPS
CONFIG_QIXIS_I2C_ACCESS
CONFIG_QSPI
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment