Commit 10a03382 authored by Stephen Warren's avatar Stephen Warren Committed by Tom Warren

ARM: tegra: add p2771-0000 board support

P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The
combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B
port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion
headers.

Currently, due to U-Boot's level of support for Tegra186, the only
features supported by U-Boot are the console UART and the on-board eMMC.
Additional features will be added over time.

U-Boot has so far been tested by replacing the kernel image on the device
with a U-Boot binary. It is anticipated that U-Boot will eventually
replace the CCPLEX bootloader binary, as on previous chips. This hasn't
yet been tested.
Signed-off-by: 's avatarStephen Warren <swarren@nvidia.com>
Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
Signed-off-by: 's avatarTom Warren <twarren@nvidia.com>
parent c7ba99c8
......@@ -47,6 +47,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra124-jetson-tk1.dtb \
tegra124-nyan-big.dtb \
tegra124-venice2.dtb \
tegra186-p2771-0000.dtb \
tegra210-e2220-1170.dtb \
tegra210-p2371-0000.dtb \
tegra210-p2371-2180.dtb \
......
/dts-v1/;
#include "tegra186.dtsi"
/ {
model = "NVIDIA P2771-0000";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
chosen {
stdout-path = &uarta;
};
aliases {
sdhci0 = "/sdhci@3460000";
};
memory {
reg = <0x0 0x80000000 0x0 0x60000000>;
};
sdhci@3460000 {
status = "okay";
bus-width = <8>;
};
};
......@@ -7,9 +7,19 @@ if TEGRA186
choice
prompt "Tegra186 board select"
config TARGET_P2771_0000
bool "NVIDIA Tegra186 P2771-0000 board"
help
P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The
combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
micro-B port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO
expansion headers.
endchoice
config SYS_SOC
default "tegra186"
source "board/nvidia/p2771-0000/Kconfig"
endif
# Copyright (c) 2016, NVIDIA CORPORATION.
#
# SPDX-License-Identifier: GPL-2.0
if TARGET_P2771_0000
config SYS_BOARD
default "p2771-0000"
config SYS_VENDOR
default "nvidia"
config SYS_CONFIG_NAME
default "p2771-0000"
endif
P2771-0000 BOARD
M: Stephen Warren <swarren@nvidia.com>
S: Maintained
F: board/nvidia/p2771-0000/
F: include/configs/p2771-0000.h
F: configs/p2771-0000_defconfig
# Copyright (c) 2016, NVIDIA CORPORATION.
#
# SPDX-License-Identifier: GPL-2.0
obj-y += p2771-0000.o
/*
* Copyright (c) 2016, NVIDIA CORPORATION
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
CONFIG_ARM=y
CONFIG_TEGRA=y
CONFIG_TEGRA186=y
CONFIG_TARGET_P2771_0000=y
CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000"
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Tegra186 (P2771-0000) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_USB=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
/*
* Copyright (c) 2013-2016, NVIDIA CORPORATION.
*
* SPDX-License-Identifier: GPL-2.0
*/
#ifndef _P2771_0000_H
#define _P2771_0000_H
#include <linux/sizes.h>
#include "tegra186-common.h"
/* High-level configuration options */
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2771-0000"
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_TEGRA_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 2
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#include "tegra-common-post.h"
/* Crystal is 38.4MHz. clk_m runs at half that rate */
#define COUNTER_FREQUENCY 19200000
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment