Commit 10ee8eca authored by Nikita Kiryanov's avatar Nikita Kiryanov Committed by Stefano Babic

sata: implement reset_sata for dwc_ahsata

Add reset_sata() to the sata driver interface and implement it
for dwc_ahsata. This function cleans up after sata_init(), and
therefore accepts a device number like sata_init() does.
A dummy implementation is provided for the rest of the drivers.
Signed-off-by: default avatarNikita Kiryanov <nikita@compulab.co.il>
Cc: Simon Glass <sjg@chromium.org>
Cc: Stefano Babic <sbabic@denx.de>
parent 8d29cef5
......@@ -74,6 +74,11 @@ int init_sata(int dev)
return ret;
}
int reset_sata(int dev)
{
return 0;
}
/* On OMAP platforms SATA provides the SCSI subsystem */
void scsi_init(void)
{
......
......@@ -192,6 +192,11 @@ int init_sata(int dev)
return 0;
}
int reset_sata(int dev)
{
return 0;
}
static inline u8 sata_inb(unsigned long ioaddr)
{
return inb(ioaddr);
......
......@@ -592,6 +592,27 @@ int init_sata(int dev)
return 0;
}
int reset_sata(int dev)
{
struct ahci_probe_ent *probe_ent =
(struct ahci_probe_ent *)sata_dev_desc[dev].priv;
struct sata_host_regs *host_mmio =
(struct sata_host_regs *)probe_ent->mmio_base;
if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
printf("The sata index %d is out of ranges\n\r", dev);
return -1;
}
setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
udelay(100);
disable_sata_clock();
return 0;
}
static void dwc_ahsata_print_info(int dev)
{
block_dev_desc_t *pdev = &(sata_dev_desc[dev]);
......
......@@ -255,6 +255,11 @@ int init_sata(int dev)
return 0;
}
int reset_sata(int dev)
{
return 0;
}
static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
{
printf("\n\rSATA: %08x\n\r", (u32)reg);
......
......@@ -1009,6 +1009,11 @@ int init_sata(int dev)
return res;
}
int reset_sata(int dev)
{
return 0;
}
/* Read up to 255 sectors
*
* Returns sectors read
......
......@@ -423,6 +423,11 @@ int init_sata(int dev)
return rc;
}
int reset_sata(int dev)
{
return 0;
}
static u8 ata_check_altstatus(struct ata_port *ap)
{
u8 val = 0;
......
......@@ -571,6 +571,11 @@ int init_sata(int dev)
return 0;
}
int reset_sata(int dev)
{
return 0;
}
/*
* SATA interface between low level driver and command layer
*/
......
......@@ -702,6 +702,11 @@ int init_sata (int dev)
return res;
}
int reset_sata(int dev)
{
return 0;
}
/* Check if device is connected to port */
int sata_bus_probe (int portno)
{
......
......@@ -3,6 +3,7 @@
#include <part.h>
int init_sata(int dev);
int reset_sata(int dev);
int scan_sata(int dev);
ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer);
ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, const void *buffer);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment