Commit 130e6c8c authored by Christian Gmeiner's avatar Christian Gmeiner Committed by Stefano Babic

ot1200: setup i2c bus 1 in setup_iomux_i2c()

On this bus there is a EEPROM containing EDID and ddr3
calibration information.
Signed-off-by: default avatarChristian Gmeiner <christian.gmeiner@gmail.com>
parent cefe06bf
......@@ -122,6 +122,20 @@ static void setup_iomux_features(void)
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C2 - EEPROM */
static struct i2c_pads_info i2c_pad_info1 = {
.scl = {
.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
.gp = IMX_GPIO_NR(2, 30)
},
.sda = {
.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
.gp = IMX_GPIO_NR(3, 16)
}
};
/* I2C3 - IO expander */
static struct i2c_pads_info i2c_pad_info2 = {
.scl = {
......@@ -138,6 +152,7 @@ static struct i2c_pads_info i2c_pad_info2 = {
static void setup_iomux_i2c(void)
{
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment