Commit 13b213b4 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Tom Rini

examples: remove the remainders of dead board

Commit 309a292e deleted OXC board, but
missed to remove the standalone example specific to OXC board.

eepro100_eeprom.c has been an orphan file for a long term.
Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
parent 5f9cc8e6
......@@ -8,7 +8,6 @@
include $(TOPDIR)/config.mk
ELF-$(ARCH) :=
ELF-$(BOARD) :=
ELF-$(CPU) :=
ELF-y := hello_world
......@@ -20,14 +19,13 @@ ELF-mpc5xxx += interrupt
ELF-mpc8xx += test_burst timer
ELF-mpc8260 += mem_to_mem_idma2intr
ELF-ppc += sched
ELF-oxc += eepro100_eeprom
#
# Some versions of make do not handle trailing white spaces properly;
# leading to build failures. The problem was found with GNU Make 3.80.
# Using 'strip' as a workaround for the problem.
#
ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU)))
ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(CPU)))
SREC := $(addsuffix .srec,$(ELF))
BIN := $(addsuffix .bin,$(ELF))
......
/*
* Copyright 1998-2001 by Donald Becker.
* This software may be used and distributed according to the terms of
* the GNU General Public License (GPL), incorporated herein by reference.
* Contact the author for use under other terms.
*
* This program must be compiled with "-O"!
* See the bottom of this file for the suggested compile-command.
*
* The author may be reached as becker@scyld.com, or C/O
* Scyld Computing Corporation
* 410 Severn Ave., Suite 210
* Annapolis MD 21403
*
* Common-sense licensing statement: Using any portion of this program in
* your own program means that you must give credit to the original author
* and release the resulting code under the GPL.
*/
/* avoid unnecessary memcpy function */
#define _PPC_STRING_H_
#include <common.h>
#include <exports.h>
static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr);
int eepro100_eeprom(int argc, char * const argv[])
{
int ret = 0;
unsigned char hwaddr1[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x05 };
unsigned char hwaddr2[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x06 };
app_startup(argv);
#if defined(CONFIG_OXC)
ret |= reset_eeprom(0x80000000, hwaddr1);
ret |= reset_eeprom(0x81000000, hwaddr2);
#endif
return ret;
}
/* Default EEPROM for i82559 */
static unsigned short default_eeprom[64] = {
0x0100, 0x0302, 0x0504, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0x40c0, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff
};
static unsigned short eeprom[256];
static int eeprom_size = 64;
static int eeprom_addr_size = 6;
static int debug = 0;
static inline unsigned short swap16(unsigned short x)
{
return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
}
static inline void outw(short data, long addr)
{
*(volatile short *)(addr) = swap16(data);
}
static inline short inw(long addr)
{
return swap16(*(volatile short *)(addr));
}
void *memcpy(void *dst, const void *src, unsigned int len)
{
char *ret = dst;
while (len-- > 0) {
*ret++ = *((char *)src);
src++;
}
return (void *)ret;
}
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5)
#define EE_READ_CMD (6)
#define EE_ERASE_CMD (7)
/* Serial EEPROM section. */
#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */
#define EE_CS 0x02 /* EEPROM chip select. */
#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */
#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
#define EE_ENB (0x4800 | EE_CS)
#define EE_WRITE_0 0x4802
#define EE_WRITE_1 0x4806
#define EE_OFFSET 14
/* Delay between EEPROM clock transitions. */
#define eeprom_delay(ee_addr) inw(ee_addr)
/* Wait for the EEPROM to finish the previous operation. */
static int eeprom_busy_poll(long ee_ioaddr)
{
int i;
outw(EE_ENB, ee_ioaddr);
for (i = 0; i < 10000; i++) /* Typical 2000 ticks */
if (inw(ee_ioaddr) & EE_DATA_READ)
break;
return i;
}
/* This executes a generic EEPROM command, typically a write or write enable.
It returns the data output from the EEPROM, and thus may also be used for
reads. */
static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len)
{
unsigned retval = 0;
long ee_addr = ioaddr + EE_OFFSET;
if (debug > 1)
printf(" EEPROM op 0x%x: ", cmd);
outw(EE_ENB | EE_SHIFT_CLK, ee_addr);
/* Shift the command bits out. */
do {
short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0;
outw(dataval, ee_addr);
eeprom_delay(ee_addr);
if (debug > 2)
printf("%X", inw(ee_addr) & 15);
outw(dataval | EE_SHIFT_CLK, ee_addr);
eeprom_delay(ee_addr);
retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0);
} while (--cmd_len >= 0);
#if 0
outw(EE_ENB, ee_addr);
#endif
/* Terminate the EEPROM access. */
outw(EE_ENB & ~EE_CS, ee_addr);
if (debug > 1)
printf(" EEPROM result is 0x%5.5x.\n", retval);
return retval;
}
static int read_eeprom(long ioaddr, int location, int addr_len)
{
return do_eeprom_cmd(ioaddr, ((EE_READ_CMD << addr_len) | location)
<< 16 , 3 + addr_len + 16) & 0xffff;
}
static void write_eeprom(long ioaddr, int index, int value, int addr_len)
{
long ee_ioaddr = ioaddr + EE_OFFSET;
int i;
/* Poll for previous op finished. */
eeprom_busy_poll(ee_ioaddr); /* Typical 0 ticks */
/* Enable programming modes. */
do_eeprom_cmd(ioaddr, (0x4f << (addr_len-4)), 3 + addr_len);
/* Do the actual write. */
do_eeprom_cmd(ioaddr,
(((EE_WRITE_CMD<<addr_len) | index)<<16) | (value & 0xffff),
3 + addr_len + 16);
/* Poll for write finished. */
i = eeprom_busy_poll(ee_ioaddr); /* Typical 2000 ticks */
if (debug)
printf(" Write finished after %d ticks.\n", i);
/* Disable programming. This command is not instantaneous, so we check
for busy before the next op. */
do_eeprom_cmd(ioaddr, (0x40 << (addr_len-4)), 3 + addr_len);
eeprom_busy_poll(ee_ioaddr);
}
static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr)
{
unsigned short checksum = 0;
int size_test;
int i;
printf("Resetting i82559 EEPROM @ 0x%08lX ... ", ioaddr);
size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27);
eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6;
eeprom_size = 1 << eeprom_addr_size;
memcpy(eeprom, default_eeprom, sizeof default_eeprom);
for (i = 0; i < 3; i++)
eeprom[i] = (hwaddr[i*2+1]<<8) + hwaddr[i*2];
/* Recalculate the checksum. */
for (i = 0; i < eeprom_size - 1; i++)
checksum += eeprom[i];
eeprom[i] = 0xBABA - checksum;
for (i = 0; i < eeprom_size; i++)
write_eeprom(ioaddr, i, eeprom[i], eeprom_addr_size);
for (i = 0; i < eeprom_size; i++)
if (read_eeprom(ioaddr, i, eeprom_addr_size) != eeprom[i]) {
printf("failed\n");
return 1;
}
printf("done\n");
return 0;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment