Commit 1bce2aeb authored by Robert P. J. Day's avatar Robert P. J. Day Committed by Tom Rini

Cosmetic: Fix a number of typos, no functional changes.

Fix various misspellings of things like "environment", "kernel",
"default" and "volatile", and throw in a couple grammar fixes.
Signed-off-by: 's avatarRobert P. J. Day <rpjday@crashcourse.ca>
parent 398bd4e5
......@@ -45,13 +45,13 @@ endif
#########################################################################
#
# U-boot build supports producing a object files to the separate external
# U-boot build supports generating object files in a separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 2) Set environment variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
......@@ -59,7 +59,7 @@ endif
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
# Command line 'O=' setting overrides BUILD_DIR environment variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
......
......@@ -3364,7 +3364,7 @@ Configuration Settings:
the Linux kernel; all data that must be processed by
the Linux kernel (bd_info, boot arguments, FDT blob if
used) must be put below this limit, unless "bootm_low"
enviroment variable is defined and non-zero. In such case
environment variable is defined and non-zero. In such case
all data for the Linux kernel must be between "bootm_low"
and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment
variable "bootm_mapsize" will override the value of
......@@ -3477,7 +3477,7 @@ Configuration Settings:
- CONFIG_ENV_FLAGS_LIST_DEFAULT
- CONFIG_ENV_FLAGS_LIST_STATIC
Enable validation of the values given to enviroment variables when
Enable validation of the values given to environment variables when
calling env set. Variables can be restricted to only decimal,
hexadecimal, or boolean. If CONFIG_CMD_NET is also defined,
the variables can also be restricted to IP address or MAC address.
......
......@@ -28,7 +28,7 @@
* by u-Boot commands.
*
* Note: Redundant environment will not work in this flash since
* it does use partial page writes. Make sure the environent spans
* it does use partial page writes. Make sure the environment spans
* whole pages!
*/
......
......@@ -302,7 +302,7 @@ int arch_cpu_init(void)
/*
* Configures the I/O voltage of the pads connected to Egigabit
* Ethernet interface to 1.8V
* By defult it is set to 3.3V
* By default it is set to 3.3V
*/
reg = readl(KW_REG_MPP_OUT_DRV_REG);
reg |= (1 << 7);
......
......@@ -87,9 +87,9 @@ u-boot>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A word on the U-Boot enviroment variable setting and usage :
A word on the U-Boot environment variable setting and usage :
In the beginning, you could just need very simple defult environment variable setting,
In the beginning, you could just need very simple default environment variable setting,
like[include/configs/RPXlite.h] :
#define CONFIG_BOOTCOMMAND \
......
......@@ -29,11 +29,11 @@ Environment Storage
There are two targets for mx28evk:
"make mx28evk_config" - store enviroment variables into MMC
"make mx28evk_config" - store environment variables into MMC
or
"make mx28evk_nand_config" - store enviroment variables into NAND flash
"make mx28evk_nand_config" - store environment variables into NAND flash
Choose the target accordingly.
......
......@@ -50,7 +50,7 @@ is a summary of that information:
trying to preserve your old environment settings and user flash).
- Set the start address of the erase/flash process to FF80_0000
- Set the target RAM required to 64kB.
- Select sectors for erasing (see note on enviroment below)
- Select sectors for erasing (see note on environment below)
- Select Erase and Reprogram.
Note that some versions of the register files used with Workbench
......
......@@ -965,7 +965,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
* @initrd_end: pointer to a ulong variable, will hold final init ramdisk
* end address (after possible relocation)
*
* boot_ramdisk_high() takes a relocation hint from "initrd_high" environement
* boot_ramdisk_high() takes a relocation hint from "initrd_high" environment
* variable and if requested ramdisk data is moved to a specified location.
*
* Initrd_start and initrd_end are set to final (after relocation) ramdisk
......
......@@ -18,7 +18,7 @@ Current implementation details/limitations:
U-Boot. But I haven't bothered yet.
2. Since we don't implement a hwconfig command, i.e. we're working
with the environement directly, there is no way to tell that
with the environment directly, there is no way to tell that
toggling a particular option will need a reboot to take
effect. So, for now it's advised to always reboot the
target after modifying the hwconfig variable.
......
......@@ -7,7 +7,7 @@
* Copyright 2010-2011 Freescale Semiconductor, Inc.
* author Andy Fleming
*
* Some code get from linux kenrel
* Some code copied from linux kernel
* Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
*/
#include <miiphy.h>
......
......@@ -154,10 +154,10 @@ The MAC address can be stored in four locations:
-Boot environmental variable in Flash <- can not change, without
re-flashing U-boot.
U-Boot environental variable <- can not change, without
U-Boot environmental variable <- can not change, without
resetting board/U-Boot
LAN91C111 Registers <- volitle
LAN91C111 EEPROM <- Non Volitle
LAN91C111 Registers <- volatile
LAN91C111 EEPROM <- Non-volatile
If you have not activated the network, and do not have a hardcoded
or pre-assigned MAC address in U-boot, the environmental variables
......
......@@ -383,7 +383,7 @@ int setenv_hex(const char *varname, ulong value);
/**
* setenv_addr - Set an environment variable to an address in hex
*
* @varname: Environmet variable to set
* @varname: Environment variable to set
* @addr: Value to set it to
* @return 0 if ok, 1 on error
*/
......
......@@ -119,7 +119,7 @@
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of one Flash sector */
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for enviroment */
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for environment */
#define CONFIG_ENV_ADDR 0xFFFC0000
#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
......
......@@ -305,7 +305,7 @@
#define CONFIG_ENV_IN_OWN_SECT 1
/* Define this to contain any number of null terminated strings that
* will be part of the default enviroment compiled into the boot image.
* will be part of the default environment compiled into the boot image.
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
"quiet=0\0" \
......
......@@ -817,7 +817,7 @@ int himport_r(struct hsearch_data *htab,
* size of 8 per entry (= safety factor of ~5) should provide enough
* safety margin for any existing environment definitions and still
* allow for more than enough dynamic additions. Note that the
* "size" argument is supposed to give the maximum enviroment size
* "size" argument is supposed to give the maximum environment size
* (CONFIG_ENV_SIZE). This heuristics will result in
* unreasonably large numbers (and thus memory footprint) for
* big flash environments (>8,000 entries for 64 KB
......
......@@ -22,7 +22,7 @@
*
* LCD backlight is not enabled if temperature values are not within
* allowed ranges (-30 .. + 80). The brightness of backlite can be
* controlled by setting "brightness" enviroment variable. Default value is 50%
* controlled by setting "brightness" environment variable. Default value is 50%
*
* See the list of all parameters in the sysmon_table below
*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment