Commit 1cc0a9f4 authored by Robert P. J. Day's avatar Robert P. J. Day Committed by Tom Rini

Fix various typos, scattered over the code.

Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller
parent b955e42b
......@@ -180,7 +180,7 @@ ulong get_ddr_freq(ulong ctrl_num)
/*
* DDR controller 0 & 1 are on memory complex 0
* DDR controler 2 is on memory complext 1
* DDR controller 2 is on memory complext 1
*/
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
if (ctrl_num >= 2)
......
......@@ -114,7 +114,7 @@ static int do_mmcsetn(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
mmcsetn, 1, 1, do_mmcsetn,
"Set the first MMC (not SD) dev number to \"mmc_first_dev\" enviroment",
"Set the first MMC (not SD) dev number to \"mmc_first_dev\" environment",
""
);
#endif
......@@ -145,7 +145,7 @@ config MIPS_BOOT_ENV_LEGACY
Enable this option if you want U-Boot to hand over the Yamon-style
environment to the kernel. Information like memory size, initrd
address and size will be prepared as zero-terminated key/value list.
The address of the enviroment is stored in register $a2.
The address of the environment is stored in register $a2.
config MIPS_BOOT_FDT
bool "Hand over a flattened device tree to Linux kernel"
......
......@@ -1151,7 +1151,7 @@ phys_size_t initdram(int board_type)
dram_size *= ranks;
debug("dram_size = %lu\n", dram_size);
/* Start the SDRAM controler */
/* Start the SDRAM controller */
mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
denali_wait_for_dlllock();
......
......@@ -812,9 +812,9 @@ static int calculate_cmp_img_sig(struct fsl_secboot_img_priv *img)
}
/* haddr - Address of the header of image to be validated.
* arg_hash_str - Option hash string. If provided, this
* overides the key hash in the SFP fuses.
* overrides the key hash in the SFP fuses.
* img_addr_ptr - Optional pointer to address of image to be validated.
* If non zero addr, this overides the addr of image in header,
* If non zero addr, this overrides the addr of image in header,
* otherwise updated to image addr in header.
* Acts as both input and output of function.
* This pointer shouldn't be NULL.
......
......@@ -45,7 +45,7 @@ or
or
"make mx28evk_spi_config" - store enviroment variables into SPI NOR flash
"make mx28evk_spi_config" - store environment variables into SPI NOR flash
Choose the target accordingly.
......
......@@ -1055,7 +1055,7 @@ static char fdt_help_text[] =
" <start> - addr of key blob\n"
" default gd->fdt_blob\n"
#endif
"NOTE: Dereference aliases by omiting the leading '/', "
"NOTE: Dereference aliases by omitting the leading '/', "
"e.g. fdt print ethernet0.";
#endif
......
......@@ -1742,7 +1742,7 @@ int mtdparts_init(void)
debug("last_partition : %s\n", last_partition);
debug("env_partition : %s\n", current_partition);
/* if mtdids varible is empty try to use defaults */
/* if mtdids variable is empty try to use defaults */
if (!ids) {
if (mtdids_default) {
debug("mtdids variable not defined, using default\n");
......
......@@ -10,7 +10,7 @@ export has two subcommands:
fdt: exports the FDT
Call is:
spl export <ftd|atags> [kernel_addr] [initrd_addr] [fdt_addr if fdt]
spl export <fdt|atags> [kernel_addr] [initrd_addr] [fdt_addr if fdt]
TYPICAL CALL
......
......@@ -34,7 +34,7 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
ex. #define CONFIG_PCMCIA_SLOT_A 1
* CONFIG_SYS_MARUBUN_MRSHPC
This is MR-SHPC-01 PCMCIA controler base address.
This is MR-SHPC-01 PCMCIA controller base address.
You should do the setting matched to your environment.
ex. #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
( for MS7722SE01 environment )
......
......@@ -219,7 +219,7 @@ There are two possibilities when preparing an image writable to NAND flash.
This script expects a working TFTP server containing the file
"u-boot.nand" in it's root directory. This can be changed by
adjusting the "update_nand_full_filename" varible.
adjusting the "update_nand_full_filename" variable.
To update the system, run the following in U-Boot prompt:
......@@ -242,7 +242,7 @@ There are two possibilities when preparing an image writable to NAND flash.
This script expects a working TFTP server containing the file
"u-boot.sb" in it's root directory. This can be changed by
adjusting the "update_nand_firmware_filename" varible.
adjusting the "update_nand_firmware_filename" variable.
To update the system, run the following in U-Boot prompt:
......
Sandbox SPI/SPI Flash Implementation
====================================
U-Boot supports SPI and SPI flash emuation in sandbox. This must be enabled
U-Boot supports SPI and SPI flash emulation in sandbox. This must be enabled
using the --spi_sf paramter when starting U-Boot.
For example:
......
......@@ -31,7 +31,7 @@ Can be used in:
Memory mapped read mode
-----------------------
In this, SPI controller is configured using configuration port and then
controler is switched to memory mapped port for data read.
controller is switched to memory mapped port for data read.
Driver
------
......
......@@ -241,7 +241,7 @@ no segment override. Address modes such as -3[BP] or 10[BP+SI] all refer to
addresses relative to SS (ie: on the stack). So, at the minimum, all
decodings of addressing modes would have to set/clear a bit describing
whether the access is relative to DS or SS. That is the function of the
cpu-state-varible M.x86.mode. There are several potential states:
cpu-state-variable M.x86.mode. There are several potential states:
repe prefix seen (handled elsewhere)
repne prefix seen (ditto)
......
......@@ -3,8 +3,8 @@ menu "DFU support"
config DFU_TFTP
bool "DFU via TFTP"
help
This option allows performing update of DFU managed medium with data
send via TFTP boot.
Detailed description of this feature can be found at ./doc/README.dfutftp
This option allows performing update of DFU-managed medium with data
sent via TFTP boot.
Detailed description of this feature can be found at ./doc/README.dfutftp
endmenu
......@@ -120,7 +120,7 @@ static int macb_is_gem(struct macb_device *macb)
static int gem_is_gigabit_capable(struct macb_device *macb)
{
/*
* The GEM controllers embeded in SAMA5D2 and SAMA5D4 are
* The GEM controllers embedded in SAMA5D2 and SAMA5D4 are
* configured to support only 10/100.
*/
return macb_is_gem(macb) && !cpu_is_sama5d2() && !cpu_is_sama5d4();
......
/*
* sh_eth.c - Driver for Renesas ethernet controler.
* sh_eth.c - Driver for Renesas ethernet controller.
*
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
* Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu
......
/*
* sh_eth.h - Driver for Renesas SuperH ethernet controler.
* sh_eth.h - Driver for Renesas SuperH ethernet controller.
*
* Copyright (C) 2008 - 2012 Renesas Solutions Corp.
* Copyright (c) 2008 - 2012 Nobuhiro Iwamatsu
......
config DM_THERMAL
bool "Driver support for thermal devices"
help
Enable support for temporary-sensing devices. Some SoCs have on-chip
Enable support for temperature-sensing devices. Some SoCs have on-chip
temperature sensors to permit warnings, speed throttling or even
automatic power-off when the temperature gets too high or low. Other
devices may be discrete but connected on a suitable bus.
......@@ -121,7 +121,7 @@
"initrd_high=0xffffffffffffffff\0" \
BOOTENV
/* Preserve enviroment on sd card */
/* Preserve environment on sd card */
#define CONFIG_COMMAND_HISTORY
#define CONFIG_ENV_SIZE 0x1000
......
......@@ -140,7 +140,7 @@
#define CONFIG_PREBOOT \
"echo ======================NOTICE============================;"\
"echo \"The u-boot environment is not set.\";" \
"echo \"If using a display a valid display varible for your panel\";" \
"echo \"If using a display a valid display variable for your panel\";" \
"echo \"needs to be set.\";" \
"echo \"Valid display options are:\";" \
"echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \
......
......@@ -102,7 +102,7 @@
"run mmcboot;" \
"run nandboot;"
/* NS16550 Configuration: primary UART via FDTI */
/* NS16550 Configuration: primary UART via FTDI */
#define CONFIG_SYS_NS16550_COM1 0x44e09000
#define CONFIG_BAUDRATE 115200
......
......@@ -570,7 +570,7 @@ int fdtdec_check_fdt(void);
* @param id Compatible ID to look for
* @param node_list Place to put list of found nodes
* @param maxcount Maximum number of nodes to find
* @return number of nodes found on success, FTD_ERR_... on error
* @return number of nodes found on success, FDT_ERR_... on error
*/
int fdtdec_find_aliases_for_id(const void *blob, const char *name,
enum fdt_compat_id id, int *node_list, int maxcount);
......
......@@ -273,12 +273,12 @@ def log_msg(color_enabled, color, defconfig, msg):
color_text(color_enabled, color, msg) + '\n'
def update_cross_compile():
"""Update per-arch CROSS_COMPILE via enviroment variables
"""Update per-arch CROSS_COMPILE via environment variables
The default CROSS_COMPILE values are available
in the CROSS_COMPILE list above.
You can override them via enviroment variables
You can override them via environment variables
CROSS_COMPILE_{ARCH}.
For example, if you want to override toolchain prefixes
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment