Commit 1cdd9412 authored by Stefan Roese's avatar Stefan Roese Committed by Tom Rini

misc: led: Add PCA9551 LED driver

This patch adds a driver for the PCA9551 LED controller.
Originated-by: default avatarTimo Herbrecher <t.herbrecher@gateware.de>
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Reviewed-by: default avatarTom Rini <trini@konsulko.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
parent aed9fed9
......@@ -60,3 +60,16 @@ config CONFIG_FSL_SEC_MON
system states.
Security Monitor can be transitioned on any security failures,
like software violations or hardware security violations.
config PCA9551_LED
bool "Enable PCA9551 LED driver"
help
Enable driver for PCA9551 LED controller. This controller
is connected via I2C. So I2C needs to be enabled.
config PCA9551_I2C_ADDR
hex "I2C address of PCA9551 LED controller"
depends on PCA9551_LED
default 0x60
help
The I2C address of the PCA9551 LED controller.
......@@ -31,3 +31,4 @@ obj-$(CONFIG_SANDBOX) += swap_case.o
obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
/*
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <errno.h>
#include <i2c.h>
#ifndef CONFIG_PCA9551_I2C_ADDR
#error "CONFIG_PCA9551_I2C_ADDR not defined!"
#endif
#define PCA9551_REG_INPUT 0x00 /* Input register (read only) */
#define PCA9551_REG_PSC0 0x01 /* Frequency prescaler 0 */
#define PCA9551_REG_PWM0 0x02 /* PWM0 */
#define PCA9551_REG_PSC1 0x03 /* Frequency prescaler 1 */
#define PCA9551_REG_PWM1 0x04 /* PWM1 */
#define PCA9551_REG_LS0 0x05 /* LED0 to LED3 selector */
#define PCA9551_REG_LS1 0x06 /* LED4 to LED7 selector */
#define PCA9551_CTRL_AI (1 << 4) /* Auto-increment flag */
#define PCA9551_LED_STATE_ON 0x00
#define PCA9551_LED_STATE_OFF 0x01
#define PCA9551_LED_STATE_BLINK0 0x02
#define PCA9551_LED_STATE_BLINK1 0x03
struct pca9551_blink_rate {
u8 psc; /* Frequency preescaler, see PCA9551_7.pdf p. 6 */
u8 pwm; /* Pulse width modulation, see PCA9551_7.pdf p. 6 */
};
static int freq0, freq1;
static int pca9551_led_get_state(int led, int *state)
{
unsigned int reg;
u8 shift, buf;
int ret;
if (led < 0 || led > 7) {
return -EINVAL;
} else if (led < 4) {
reg = PCA9551_REG_LS0;
shift = led << 1;
} else {
reg = PCA9551_REG_LS1;
shift = (led - 4) << 1;
}
ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
if (ret)
return ret;
*state = (buf >> shift) & 0x03;
return 0;
}
static int pca9551_led_set_state(int led, int state)
{
unsigned int reg;
u8 shift, buf, mask;
int ret;
if (led < 0 || led > 7) {
return -EINVAL;
} else if (led < 4) {
reg = PCA9551_REG_LS0;
shift = led << 1;
} else {
reg = PCA9551_REG_LS1;
shift = (led - 4) << 1;
}
mask = 0x03 << shift;
ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
if (ret)
return ret;
buf = (buf & ~mask) | ((state & 0x03) << shift);
ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1);
if (ret)
return ret;
return 0;
}
static int pca9551_led_set_blink_rate(int idx, struct pca9551_blink_rate rate)
{
unsigned int reg;
int ret;
switch (idx) {
case 0:
reg = PCA9551_REG_PSC0;
break;
case 1:
reg = PCA9551_REG_PSC1;
break;
default:
return -EINVAL;
}
reg |= PCA9551_CTRL_AI;
ret = i2c_write(CONFIG_PCA9551_I2C_ADDR, reg, 1, (u8 *)&rate, 2);
if (ret)
return ret;
return 0;
}
/*
* Functions referenced by cmd_led.c
*/
void __led_set(led_id_t mask, int state)
{
if (state == STATUS_LED_OFF)
pca9551_led_set_state(mask, PCA9551_LED_STATE_OFF);
else
pca9551_led_set_state(mask, PCA9551_LED_STATE_ON);
}
void __led_toggle(led_id_t mask)
{
int state = 0;
pca9551_led_get_state(mask, &state);
pca9551_led_set_state(mask, !state);
}
void __led_blink(led_id_t mask, int freq)
{
struct pca9551_blink_rate rate;
int mode;
int blink;
if ((freq0 == 0) || (freq == freq0)) {
blink = 0;
mode = PCA9551_LED_STATE_BLINK0;
freq0 = freq;
} else {
blink = 1;
mode = PCA9551_LED_STATE_BLINK1;
freq1 = freq;
}
rate.psc = ((freq * 38) / 1000) - 1;
rate.pwm = 128; /* 50% duty cycle */
pca9551_led_set_blink_rate(blink, rate);
pca9551_led_set_state(mask, mode);
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment