Commit 1deeecb6 authored by Philipp Tomsich's avatar Philipp Tomsich Committed by Tom Rini

sun8i_emac: Fix mdio read sequence

To send a parametrized command to the PHY over MDIO, we should write
the data first, the trigger the execution by the command register
write. Fix the access pattern in our MDIO write routine.
Apparently this doesn't really matter with the Realtek PHY on the
Pine64, but other PHYs (which require more setup) will choke on
the wrong order.
[Andre: add commit message]
Signed-off-by: default avatarPhilipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: default avatarAndre Przywara <andre.przywara@arm.com>
Acked-by: default avatarJagan Teki <jagan@openedev.com>
parent 5782954c
......@@ -180,8 +180,8 @@ static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
miiaddr |= MDIO_CMD_MII_WRITE;
miiaddr |= MDIO_CMD_MII_BUSY;
writel(miiaddr, priv->mac_reg + EMAC_MII_CMD);
writel(val, priv->mac_reg + EMAC_MII_DATA);
writel(miiaddr, priv->mac_reg + EMAC_MII_CMD);
start = get_timer(0);
while (get_timer(start) < timeout) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment