Commit 3450a859 authored by Vagrant Cascadian's avatar Vagrant Cascadian Committed by Tom Rini

Fix spelling of "resetting".

Cover-Letter: Fixes several spelling errors for the words "resetting",
  "extended", "occur", and "multiple".
Signed-off-by: default avatarVagrant Cascadian <vagrant@debian.org>
Reviewed-by: default avatarSimon Glass <sjg@chromium.org>
parent da1a3bd4
......@@ -618,7 +618,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
/*
* Send NOP, MRS and ZQINIT commands
* Sending MRS command will reset the DRAM. We should not be
* reseting the DRAM after resume, this will lead to memory
* resetting the DRAM after resume, this will lead to memory
* corruption as DRAM content is lost after DRAM reset
*/
dmc_config_mrs(mem, &drex0->directcmd);
......
......@@ -362,7 +362,7 @@ int arch_early_init_r(void)
* issuing warm reset. The ancient kernel code expects this
* value to be written into the register by the bootloader, so
* to support that old code, we write it here instead of in the
* reset_cpu() function just before reseting the CPU.
* reset_cpu() function just before resetting the CPU.
*/
writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
......
......@@ -671,7 +671,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
__u32 info = 0;
unsigned int toggle = 0;
/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
/* OHCI handles the DATA-toggles itself, we just use the
USB-toggle bits for resetting */
if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
......
......@@ -670,7 +670,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
__u32 info = 0;
unsigned int toggle = 0;
/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
/* OHCI handles the DATA-toggles itself, we just use the
USB-toggle bits for resetting */
if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
......
......@@ -673,7 +673,8 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
__u32 info = 0;
unsigned int toggle = 0;
/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
/* OHCI handles the DATA-toggles itself, we just use the
USB-toggle bits for resetting */
if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
......
......@@ -1024,7 +1024,7 @@ static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
start = get_timer(0);
while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) {
if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
printf("FEC MXC: Timeout reseting chip\n");
printf("FEC MXC: Timeout resetting chip\n");
goto err4;
}
udelay(10);
......
......@@ -964,7 +964,7 @@ static void td_submit_job(ohci_t *ohci, struct usb_device *dev,
flush_dcache_buffer(buffer, data_len);
/* OHCI handles the DATA-toggles itself, we just use the USB-toggle
* bits for reseting */
* bits for resetting */
if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
......
......@@ -677,7 +677,7 @@ static void td_submit_job(struct usb_device *dev, unsigned long pipe,
unsigned int toggle = 0;
/* OHCI handles the DATA-toggles itself, we just
use the USB-toggle bits for reseting */
use the USB-toggle bits for resetting */
if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
toggle = TD_T_TOGGLE;
} else {
......
......@@ -72,7 +72,7 @@ long trailing_strtoln(const char *str, const char *end);
* panic() - Print a message and reset/hang
*
* Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
* defined, then it will hang instead of reseting.
* defined, then it will hang instead of resetting.
*
* @param fmt: printf() format string for message, which should not include
* \n, followed by arguments
......@@ -84,7 +84,7 @@ void panic(const char *fmt, ...)
* panic_str() - Print a message and reset/hang
*
* Prints a message on the console(s) and then resets. If CONFIG_PANIC_HANG is
* defined, then it will hang instead of reseting.
* defined, then it will hang instead of resetting.
*
* This function can be used instead of panic() when your board does not
* already use printf(), * to keep code size small.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment