Commit 39cf4804 authored by Stelian Pop's avatar Stelian Pop Committed by Jean-Christophe PLAGNIOL-VILLARD

Add ATMEL LCD driver

This patch adds support for the ATMEL LCDC driver which is used on some
AT91 and AVR platforms.

Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
Signed-off-by: 's avatarStelian Pop <stelian@popies.net>
Signed-off-by: 's avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
parent 2118ebb4
......@@ -962,6 +962,10 @@ The following options need to be configured:
display); also select one of the supported displays
by defining one of these:
CONFIG_ATMEL_LCD:
HITACHI TX09D70VM1CCA, 3.5", 240x320.
CONFIG_NEC_NL6448AC33:
NEC NL6448AC33-18. Active, color, single scan.
......
......@@ -50,6 +50,12 @@
#include <lcdvideo.h>
#endif
#if defined(CONFIG_ATMEL_LCD)
#include <atmel_lcdc.h>
#include <nand.h>
extern nand_info_t nand_info[];
#endif
#ifdef CONFIG_LCD
/************************************************************************/
......@@ -474,14 +480,22 @@ ulong lcd_setmem (ulong addr)
static void lcd_setfgcolor (int color)
{
#ifdef CONFIG_ATMEL_LCD
lcd_color_fg = color;
#else
lcd_color_fg = color & 0x0F;
#endif
}
/*----------------------------------------------------------------------*/
static void lcd_setbgcolor (int color)
{
#ifdef CONFIG_ATMEL_LCD
lcd_color_bg = color;
#else
lcd_color_bg = color & 0x0F;
#endif
}
/*----------------------------------------------------------------------*/
......@@ -508,7 +522,11 @@ static int lcd_getbgcolor (void)
#ifdef CONFIG_LCD_LOGO
void bitmap_plot (int x, int y)
{
#ifdef CONFIG_ATMEL_LCD
uint *cmap;
#else
ushort *cmap;
#endif
ushort i, j;
uchar *bmap;
uchar *fb;
......@@ -533,6 +551,8 @@ void bitmap_plot (int x, int y)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[BMP_LOGO_OFFSET*sizeof(ushort)]);
#elif defined(CONFIG_ATMEL_LCD)
cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
#endif
WATCHDOG_RESET();
......@@ -540,11 +560,26 @@ void bitmap_plot (int x, int y)
/* Set color map */
for (i=0; i<(sizeof(bmp_logo_palette)/(sizeof(ushort))); ++i) {
ushort colreg = bmp_logo_palette[i];
#ifdef CONFIG_ATMEL_LCD
uint lut_entry;
#ifdef CONFIG_ATMEL_LCD_BGR555
lut_entry = ((colreg & 0x000F) << 11) |
((colreg & 0x00F0) << 2) |
((colreg & 0x0F00) >> 7);
#else /* CONFIG_ATMEL_LCD_RGB565 */
lut_entry = ((colreg & 0x000F) << 1) |
((colreg & 0x00F0) << 3) |
((colreg & 0x0F00) << 4);
#endif
*(cmap + BMP_LOGO_OFFSET) = lut_entry;
cmap++;
#else /* !CONFIG_ATMEL_LCD */
#ifdef CFG_INVERT_COLORS
*cmap++ = 0xffff - colreg;
#else
*cmap++ = colreg;
#endif
#endif /* CONFIG_ATMEL_LCD */
}
WATCHDOG_RESET();
......@@ -578,7 +613,9 @@ void bitmap_plot (int x, int y)
*/
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
#if !defined(CONFIG_MCC200)
#ifdef CONFIG_ATMEL_LCD
uint *cmap;
#elif !defined(CONFIG_MCC200)
ushort *cmap;
#endif
ushort i, j;
......@@ -633,6 +670,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
#elif defined(CONFIG_ATMEL_LCD)
cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
#else
# error "Don't know location of color map"
#endif
......@@ -708,6 +747,10 @@ static void *lcd_logo (void)
#ifdef CONFIG_LCD_INFO
char info[80];
char temp[32];
#ifdef CONFIG_ATMEL_LCD
int i;
ulong dram_size, nand_size;
#endif
#endif /* CONFIG_LCD_INFO */
#ifdef CONFIG_SPLASH_SCREEN
......@@ -765,6 +808,40 @@ static void *lcd_logo (void)
# endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_MPC823 */
#ifdef CONFIG_ATMEL_LCD
# ifdef CONFIG_LCD_INFO
sprintf (info, "%s", U_BOOT_VERSION);
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
sprintf (info, "(C) 2008 ATMEL Corp");
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
(uchar *)info, strlen(info));
sprintf (info, "at91support@atmel.com");
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
(uchar *)info, strlen(info));
sprintf (info, "%s CPU at %s MHz",
AT91_CPU_NAME,
strmhz(temp, AT91_MAIN_CLOCK));
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
(uchar *)info, strlen(info));
dram_size = 0;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
dram_size += gd->bd->bi_dram[i].size;
nand_size = 0;
for (i = 0; i < CFG_MAX_NAND_DEVICE; i++)
nand_size += nand_info[i].size;
sprintf (info, " %ld MB SDRAM, %ld MB NAND",
dram_size >> 20,
nand_size >> 20 );
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
(uchar *)info, strlen(info));
# endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_ATMEL_LCD */
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
#else
......
......@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libvideo.a
COBJS-y += ati_radeon_fb.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-y += cfb_console.o
COBJS-y += ct69000.o
COBJS-y += mb862xx.o
......
/*
* Driver for AT91/AT32 LCD Controller
*
* Copyright (C) 2007 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
#include <atmel_lcdc.h>
int lcd_line_length;
int lcd_color_fg;
int lcd_color_bg;
void *lcd_base; /* Start of framebuffer memory */
void *lcd_console_address; /* Start of console buffer */
short console_col;
short console_row;
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91CAP9)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
#endif
#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
#define lcdc_writel(mmio, reg, val) __raw_writel((val), (mmio)+(reg))
void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
{
#if defined(CONFIG_ATMEL_LCD_BGR555)
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
(red >> 3) | ((green & 0xf8) << 2) | ((blue & 0xf8) << 7));
#else
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LUT(regno),
(blue >> 3) | ((green & 0xfc) << 3) | ((red & 0xf8) << 8));
#endif
}
void lcd_ctrl_init(void *lcdbase)
{
unsigned long value;
/* Turn off the LCD controller and the DMA controller */
lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
1 << ATMEL_LCDC_GUARDT_OFFSET);
/* Wait for the LCDC core to become idle */
while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
udelay(10);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0);
/* Reset LCDC DMA */
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST);
/* ...set frame size and burst length = 8 words (?) */
value = (panel_info.vl_col * panel_info.vl_row *
NBITS(panel_info.vl_bpix)) / 32;
value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value);
/* Set pixel clock */
value = get_lcdc_clk_rate(0) / panel_info.vl_clk;
if (get_lcdc_clk_rate(0) % panel_info.vl_clk)
value++;
value = (value / 2) - 1;
if (!value) {
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
} else
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1,
value << ATMEL_LCDC_CLKVAL_OFFSET);
/* Initialize control register 2 */
value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
if (panel_info.vl_tft)
value |= ATMEL_LCDC_DISTYPE_TFT;
if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED))
value |= ATMEL_LCDC_INVLINE_INVERTED;
if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED))
value |= ATMEL_LCDC_INVFRAME_INVERTED;
value |= (panel_info.vl_bpix << 5);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value);
/* Vertical timing */
value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET;
value |= panel_info.vl_lower_margin;
lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value);
/* Horizontal timing */
value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
value |= (panel_info.vl_left_margin - 1);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value);
/* Display size */
value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
value |= panel_info.vl_row - 1;
lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value);
/* FIFO Threshold: Use formula from data sheet */
value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value);
/* Toggle LCD_MODE every frame */
lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0);
/* Disable all interrupts */
lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL);
/* Set contrast */
value = ATMEL_LCDC_PS_DIV8 |
ATMEL_LCDC_POL_POSITIVE |
ATMEL_LCDC_ENA_PWMENABLE;
lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
/* Set framebuffer DMA base address and pixel offset */
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN);
lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON,
(1 << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
}
ulong calc_fbsize(void)
{
return ((panel_info.vl_col * panel_info.vl_row *
NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
}
......@@ -36,4 +36,10 @@ static inline unsigned long get_usart_clk_rate(unsigned int dev_id)
return AT91_MASTER_CLOCK;
}
static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
{
return AT91_MASTER_CLOCK;
}
#endif /* __ASM_ARM_ARCH_CLK_H__ */
/*
* Header file for AT91/AT32 LCD Controller
*
* Data structure and register user interface
*
* Copyright (C) 2007 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ATMEL_LCDC_H__
#define __ATMEL_LCDC_H__
#define ATMEL_LCDC_DMABADDR1 0x00
#define ATMEL_LCDC_DMABADDR2 0x04
#define ATMEL_LCDC_DMAFRMPT1 0x08
#define ATMEL_LCDC_DMAFRMPT2 0x0c
#define ATMEL_LCDC_DMAFRMADD1 0x10
#define ATMEL_LCDC_DMAFRMADD2 0x14
#define ATMEL_LCDC_DMAFRMCFG 0x18
#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
#define ATMEL_LCDC_BLENGTH_OFFSET 24
#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
#define ATMEL_LCDC_DMACON 0x1c
#define ATMEL_LCDC_DMAEN (0x1 << 0)
#define ATMEL_LCDC_DMARST (0x1 << 1)
#define ATMEL_LCDC_DMABUSY (0x1 << 2)
#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
#define ATMEL_LCDC_DMA2DCFG 0x20
#define ATMEL_LCDC_ADDRINC_OFFSET 0
#define ATMEL_LCDC_ADDRINC (0xffff)
#define ATMEL_LCDC_PIXELOFF_OFFSET 24
#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
#define ATMEL_LCDC_LCDCON1 0x0800
#define ATMEL_LCDC_BYPASS (1 << 0)
#define ATMEL_LCDC_CLKVAL_OFFSET 12
#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
#define ATMEL_LCDC_LINCNT (0x7ff << 21)
#define ATMEL_LCDC_LCDCON2 0x0804
#define ATMEL_LCDC_DISTYPE (3 << 0)
#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
#define ATMEL_LCDC_SCANMOD (1 << 2)
#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
#define ATMEL_LCDC_IFWIDTH (3 << 3)
#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
#define ATMEL_LCDC_PIXELSIZE (7 << 5)
#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
#define ATMEL_LCDC_INVVD (1 << 8)
#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
#define ATMEL_LCDC_INVFRAME (1 << 9 )
#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
#define ATMEL_LCDC_INVLINE (1 << 10)
#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
#define ATMEL_LCDC_INVCLK (1 << 11)
#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
#define ATMEL_LCDC_INVDVAL (1 << 12)
#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
#define ATMEL_LCDC_CLKMOD (1 << 15)
#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
#define ATMEL_LCDC_MEMOR (1 << 31)
#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
#define ATMEL_LCDC_TIM1 0x0808
#define ATMEL_LCDC_VFP (0xffU << 0)
#define ATMEL_LCDC_VBP_OFFSET 8
#define ATMEL_LCDC_VBP (0xffU << ATMEL_LCDC_VBP_OFFSET)
#define ATMEL_LCDC_VPW_OFFSET 16
#define ATMEL_LCDC_VPW (0x3fU << ATMEL_LCDC_VPW_OFFSET)
#define ATMEL_LCDC_VHDLY_OFFSET 24
#define ATMEL_LCDC_VHDLY (0xfU << ATMEL_LCDC_VHDLY_OFFSET)
#define ATMEL_LCDC_TIM2 0x080c
#define ATMEL_LCDC_HBP (0xffU << 0)
#define ATMEL_LCDC_HPW_OFFSET 8
#define ATMEL_LCDC_HPW (0x3fU << ATMEL_LCDC_HPW_OFFSET)
#define ATMEL_LCDC_HFP_OFFSET 21
#define ATMEL_LCDC_HFP (0x7ffU << ATMEL_LCDC_HFP_OFFSET)
#define ATMEL_LCDC_LCDFRMCFG 0x0810
#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
#define ATMEL_LCDC_HOZVAL_OFFSET 21
#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
#define ATMEL_LCDC_FIFO 0x0814
#define ATMEL_LCDC_FIFOTH (0xffff)
#define ATMEL_LCDC_MVAL 0x0818
#define ATMEL_LCDC_DP1_2 0x081c
#define ATMEL_LCDC_DP4_7 0x0820
#define ATMEL_LCDC_DP3_5 0x0824
#define ATMEL_LCDC_DP2_3 0x0828
#define ATMEL_LCDC_DP5_7 0x082c
#define ATMEL_LCDC_DP3_4 0x0830
#define ATMEL_LCDC_DP4_5 0x0834
#define ATMEL_LCDC_DP6_7 0x0838
#define ATMEL_LCDC_DP1_2_VAL (0xff)
#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
#define ATMEL_LCDC_DP2_3_VAL (0xfff)
#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
#define ATMEL_LCDC_DP3_4_VAL (0xffff)
#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
#define ATMEL_LCDC_PWRCON 0x083c
#define ATMEL_LCDC_PWR (1 << 0)
#define ATMEL_LCDC_GUARDT_OFFSET 1
#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
#define ATMEL_LCDC_BUSY (1 << 31)
#define ATMEL_LCDC_CONTRAST_CTR 0x0840
#define ATMEL_LCDC_PS (3 << 0)
#define ATMEL_LCDC_PS_DIV1 (0 << 0)
#define ATMEL_LCDC_PS_DIV2 (1 << 0)
#define ATMEL_LCDC_PS_DIV4 (2 << 0)
#define ATMEL_LCDC_PS_DIV8 (3 << 0)
#define ATMEL_LCDC_POL (1 << 2)
#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
#define ATMEL_LCDC_ENA (1 << 3)
#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
#define ATMEL_LCDC_CONTRAST_VAL 0x0844
#define ATMEL_LCDC_CVAL (0xff)
#define ATMEL_LCDC_IER 0x0848
#define ATMEL_LCDC_IDR 0x084c
#define ATMEL_LCDC_IMR 0x0850
#define ATMEL_LCDC_ISR 0x0854
#define ATMEL_LCDC_ICR 0x0858
#define ATMEL_LCDC_LNI (1 << 0)
#define ATMEL_LCDC_LSTLNI (1 << 1)
#define ATMEL_LCDC_EOFI (1 << 2)
#define ATMEL_LCDC_UFLWI (1 << 4)
#define ATMEL_LCDC_OWRI (1 << 5)
#define ATMEL_LCDC_MERI (1 << 6)
#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
#endif /* __ATMEL_LCDC_H__ */
......@@ -155,7 +155,35 @@ typedef struct vidinfo {
u_char vl_bpix; /* Bits per pixel, 0 = 1 */
} vidinfo_t;
#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
#elif defined(CONFIG_ATMEL_LCD)
typedef struct vidinfo {
u_long vl_col; /* Number of columns (i.e. 640) */
u_long vl_row; /* Number of rows (i.e. 480) */
u_long vl_clk; /* pixel clock in ps */
/* LCD configuration register */
u_long vl_sync; /* Horizontal / vertical sync */
u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
u_long vl_tft; /* 0 = passive, 1 = TFT */
/* Horizontal control register. */
u_long vl_hsync_len; /* Length of horizontal sync */
u_long vl_left_margin; /* Time from sync to picture */
u_long vl_right_margin; /* Time from picture to sync */
/* Vertical control register. */
u_long vl_vsync_len; /* Length of vertical sync */
u_long vl_upper_margin; /* Time from sync to picture */
u_long vl_lower_margin; /* Time from picture to sync */
u_long mmio; /* Memory mapped registers */
} vidinfo_t;
extern vidinfo_t panel_info;
#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
/* Video functions */
......
......@@ -121,6 +121,20 @@ void *sbrk (ptrdiff_t increment)
return ((void *) old);
}
char *strmhz(char *buf, long hz)
{
long l, n;
long m;
n = hz / 1000000L;
l = sprintf (buf, "%ld", n);
m = (hz % 1000000L) / 1000L;
if (m != 0)
sprintf (buf + l, ".%03ld", m);
return (buf);
}
/************************************************************************
* Coloured LED functionality
************************************************************************
......@@ -279,7 +293,7 @@ void start_armboot (void)
{
init_fnc_t **init_fnc_ptr;
char *s;
#ifndef CFG_NO_FLASH
#if !defined(CFG_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
ulong size;
#endif
#if defined(CONFIG_VFD) || defined(CONFIG_LCD)
......@@ -323,16 +337,19 @@ void start_armboot (void)
#endif /* CONFIG_VFD */
#ifdef CONFIG_LCD
# ifndef PAGE_SIZE
# define PAGE_SIZE 4096
# endif
/*
* reserve memory for LCD display (always full pages)
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
size = lcd_setmem (addr);
gd->fb_base = addr;
/* board init may have inited fb_base */
if (!gd->fb_base) {
# ifndef PAGE_SIZE
# define PAGE_SIZE 4096
# endif
/*
* reserve memory for LCD display (always full pages)
*/
/* bss_end is defined in the board-specific linker script */
addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
size = lcd_setmem (addr);
gd->fb_base = addr;
}
#endif /* CONFIG_LCD */
/* armboot_start is defined in the board-specific linker script */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment