Commit 3ac83935 authored by Simon Glass's avatar Simon Glass

x86: ivybridge: Add SATA init

Add code to set up the SATA interfaces on boot.
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
parent 05efc396
......@@ -15,4 +15,5 @@ obj-y += microcode_intel.o
obj-y += pch.o
obj-y += pci.o
obj-y += report_platform.o
obj-y += sata.o
obj-y += sdram.o
......@@ -88,18 +88,38 @@ void bd82x6x_pci_bus_enable_resources(pci_dev_t dev)
int bd82x6x_init_pci_devices(void)
{
const void *blob = gd->fdt_blob;
struct pci_controller *hose;
int sata_node;
hose = pci_bus_to_hose(0);
lpc_enable(PCH_LPC_DEV);
lpc_init(hose, PCH_LPC_DEV);
sata_node = fdtdec_next_compatible(blob, 0,
COMPAT_INTEL_PANTHERPOINT_AHCI);
if (sata_node < 0) {
debug("%s: Cannot find SATA node\n", __func__);
return -EINVAL;
}
bd82x6x_sata_init(PCH_SATA_DEV, blob, sata_node);
return 0;
}
int bd82x6x_init(void)
{
const void *blob = gd->fdt_blob;
int sata_node;
sata_node = fdtdec_next_compatible(blob, 0,
COMPAT_INTEL_PANTHERPOINT_AHCI);
if (sata_node < 0) {
debug("%s: Cannot find SATA node\n", __func__);
return -EINVAL;
}
bd82x6x_pci_init(PCH_DEV);
bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
return 0;
}
/*
* From Coreboot
* Copyright (C) 2008-2009 coresystems GmbH
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/arch/pch.h>
#include <asm/arch/bd82x6x.h>
static inline u32 sir_read(pci_dev_t dev, int idx)
{
pci_write_config32(dev, SATA_SIRI, idx);
return pci_read_config32(dev, SATA_SIRD);
}
static inline void sir_write(pci_dev_t dev, int idx, u32 value)
{
pci_write_config32(dev, SATA_SIRI, idx);
pci_write_config32(dev, SATA_SIRD, value);
}
static void common_sata_init(pci_dev_t dev, unsigned int port_map)
{
u32 reg32;
u16 reg16;
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
pci_write_config32(dev, IDE_CONFIG, reg32);
/* Port enable */
reg16 = pci_read_config16(dev, 0x92);
reg16 &= ~0x3f;
reg16 |= port_map;
pci_write_config16(dev, 0x92, reg16);
/* SATA Initialization register */
port_map &= 0xff;
pci_write_config32(dev, 0x94, ((port_map ^ 0x3f) << 24) | 0x183);
}
void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node)
{
unsigned int port_map, speed_support, port_tx;
struct pci_controller *hose = pci_bus_to_hose(0);
const char *mode;
u32 reg32;
u16 reg16;
debug("SATA: Initializing...\n");
/* SATA configuration */
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
speed_support = fdtdec_get_int(blob, node,
"sata_interface_speed_support", 0);
/* Enable BARs */
pci_write_config16(dev, PCI_COMMAND, 0x0007);
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
if (!mode || !strcmp(mode, "ahci")) {
u32 abar;
debug("SATA: Controller in AHCI mode\n");
/* Set Interrupt Line, Interrupt Pin is set by D31IP.PIP */
pci_write_config8(dev, INTR_LN, 0x0a);
/* Set timings */
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
/* Sync DMA */
pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
common_sata_init(dev, 0x8000 | port_map);
/* Initialize AHCI memory-mapped space */
abar = pci_read_bar32(hose, dev, 5);
debug("ABAR: %08X\n", abar);
/* CAP (HBA Capabilities) : enable power management */
reg32 = readl(abar + 0x00);
reg32 |= 0x0c006000; /* set PSC+SSC+SALP+SSS */
reg32 &= ~0x00020060; /* clear SXS+EMS+PMS */
/* Set ISS, if available */
if (speed_support) {
reg32 &= ~0x00f00000;
reg32 |= (speed_support & 0x03) << 20;
}
writel(reg32, abar + 0x00);
/* PI (Ports implemented) */
writel(port_map, abar + 0x0c);
(void) readl(abar + 0x0c); /* Read back 1 */
(void) readl(abar + 0x0c); /* Read back 2 */
/* CAP2 (HBA Capabilities Extended)*/
reg32 = readl(abar + 0x24);
reg32 &= ~0x00000002;
writel(reg32, abar + 0x24);
/* VSP (Vendor Specific Register */
reg32 = readl(abar + 0xa0);
reg32 &= ~0x00000005;
writel(reg32, abar + 0xa0);
} else if (!strcmp(mode, "combined")) {
debug("SATA: Controller in combined mode\n");
/* No AHCI: clear AHCI base */
pci_write_bar32(hose, dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
reg16 = pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
pci_write_config16(dev, PCI_COMMAND, reg16);
pci_write_config8(dev, 0x09, 0x80);
/* Set timings */
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
common_sata_init(dev, port_map);
} else {
debug("SATA: Controller in plain-ide mode\n");
/* No AHCI: clear AHCI base */
pci_write_bar32(hose, dev, 5, 0x00000000);
/* And without AHCI BAR no memory decoding */
reg16 = pci_read_config16(dev, PCI_COMMAND);
reg16 &= ~PCI_COMMAND_MEMORY;
pci_write_config16(dev, PCI_COMMAND, reg16);
/*
* Native mode capable on both primary and secondary (0xa)
* OR'ed with enabled (0x50) = 0xf
*/
pci_write_config8(dev, 0x09, 0x8f);
/* Set Interrupt Line */
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config8(dev, INTR_LN, 0xff);
/* Set timings */
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_SITRE | IDE_ISP_3_CLOCKS |
IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0);
/* Sync DMA */
pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0);
pci_write_config16(dev, IDE_SDMA_TIM, 0x0201);
common_sata_init(dev, port_map);
}
/* Set Gen3 Transmitter settings if needed */
port_tx = fdtdec_get_int(blob, node, "intel,sata-port0-gen3-tx", 0);
if (port_tx)
pch_iobp_update(SATA_IOBP_SP0G3IR, 0, port_tx);
port_tx = fdtdec_get_int(blob, node, "intel,sata-port1-gen3-tx", 0);
if (port_tx)
pch_iobp_update(SATA_IOBP_SP1G3IR, 0, port_tx);
/* Additional Programming Requirements */
sir_write(dev, 0x04, 0x00001600);
sir_write(dev, 0x28, 0xa0000033);
reg32 = sir_read(dev, 0x54);
reg32 &= 0xff000000;
reg32 |= 0x5555aa;
sir_write(dev, 0x54, reg32);
sir_write(dev, 0x64, 0xcccc8484);
reg32 = sir_read(dev, 0x68);
reg32 &= 0xffff0000;
reg32 |= 0xcccc;
sir_write(dev, 0x68, reg32);
reg32 = sir_read(dev, 0x78);
reg32 &= 0x0000ffff;
reg32 |= 0x88880000;
sir_write(dev, 0x78, reg32);
sir_write(dev, 0x84, 0x001c7000);
sir_write(dev, 0x88, 0x88338822);
sir_write(dev, 0xa0, 0x001c7000);
sir_write(dev, 0xc4, 0x0c0c0c0c);
sir_write(dev, 0xc8, 0x0c0c0c0c);
sir_write(dev, 0xd4, 0x10000000);
pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000);
pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100);
}
void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node)
{
unsigned port_map;
const char *mode;
u16 map = 0;
/*
* Set SATA controller mode early so the resource allocator can
* properly assign IO/Memory resources for the controller.
*/
mode = fdt_getprop(blob, node, "intel,sata-mode", NULL);
if (mode && !strcmp(mode, "ahci"))
map = 0x0060;
port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
map |= (port_map ^ 0x3f) << 8;
pci_write_config16(dev, 0x90, map);
}
......@@ -7,6 +7,8 @@
#ifndef _ASM_ARCH_BD82X6X_H
#define _ASM_ARCH_BD82X6X_H
void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node);
void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node);
void bd82x6x_pci_init(pci_dev_t dev);
int bd82x6x_init_pci_devices(void);
int bd82x6x_init(void);
......
......@@ -122,6 +122,64 @@ void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */
#define LPC_GENX_DEC(x) (0x84 + 4 * (x))
/* PCI Configuration Space (D31:F1): IDE */
#define PCH_IDE_DEV PCI_BDF(0, 0x1f, 1)
#define PCH_SATA_DEV PCI_BDF(0, 0x1f, 2)
#define PCH_SATA2_DEV PCI_BDF(0, 0x1f, 5)
#define INTR_LN 0x3c
#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
#define IDE_DECODE_ENABLE (1 << 15)
#define IDE_SITRE (1 << 14)
#define IDE_ISP_5_CLOCKS (0 << 12)
#define IDE_ISP_4_CLOCKS (1 << 12)
#define IDE_ISP_3_CLOCKS (2 << 12)
#define IDE_RCT_4_CLOCKS (0 << 8)
#define IDE_RCT_3_CLOCKS (1 << 8)
#define IDE_RCT_2_CLOCKS (2 << 8)
#define IDE_RCT_1_CLOCKS (3 << 8)
#define IDE_DTE1 (1 << 7)
#define IDE_PPE1 (1 << 6)
#define IDE_IE1 (1 << 5)
#define IDE_TIME1 (1 << 4)
#define IDE_DTE0 (1 << 3)
#define IDE_PPE0 (1 << 2)
#define IDE_IE0 (1 << 1)
#define IDE_TIME0 (1 << 0)
#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */
#define IDE_SSDE1 (1 << 3)
#define IDE_SSDE0 (1 << 2)
#define IDE_PSDE1 (1 << 1)
#define IDE_PSDE0 (1 << 0)
#define IDE_SDMA_TIM 0x4a
#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
#define SIG_MODE_SEC_NORMAL (0 << 18)
#define SIG_MODE_SEC_TRISTATE (1 << 18)
#define SIG_MODE_SEC_DRIVELOW (2 << 18)
#define SIG_MODE_PRI_NORMAL (0 << 16)
#define SIG_MODE_PRI_TRISTATE (1 << 16)
#define SIG_MODE_PRI_DRIVELOW (2 << 16)
#define FAST_SCB1 (1 << 15)
#define FAST_SCB0 (1 << 14)
#define FAST_PCB1 (1 << 13)
#define FAST_PCB0 (1 << 12)
#define SCB1 (1 << 3)
#define SCB0 (1 << 2)
#define PCB1 (1 << 1)
#define PCB0 (1 << 0)
#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */
#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */
#define SATA_SP 0xd0 /* Scratchpad */
/* SATA IOBP Registers */
#define SATA_IOBP_SP0G3IR 0xea000151
#define SATA_IOBP_SP1G3IR 0xea000051
/* PCI Configuration Space (D31:F3): SMBus */
#define PCH_SMBUS_DEV PCI_BDF(0, 0x1f, 3)
#define SMB_BASE 0x20
......
Intel Pantherpoint SATA Device Binding
======================================
The device tree node which describes the operation of the Intel Pantherpoint
SATA device is as follows:
Required properties :
- compatible = "intel,pantherpoint-ahci"
- intel,sata-mode : string, one of:
"ahci" : Use AHCI mode (default)
"combined" : Use combined IDE + legacy mode
"plain-ide" : Use plain IDE mode
- intel,sata-port-map : Which SATA ports are enabled, bit 0=enable first port,
bit 1=enable second port, etc.
- intel,sata-port0-gen3-tx : Value for the IOBP_SP0G3IR register
- intel,sata-port1-gen3-tx : Value for the IOBP_SP1G3IR register
Example
-------
sata {
compatible = "intel,pantherpoint-ahci";
intel,sata-mode = "ahci";
intel,sata-port-map = <1>;
intel,sata-port0-gen3-tx = <0x00880a7f>;
};
......@@ -120,6 +120,7 @@ enum fdt_compat_id {
COMPAT_INTEL_LPC, /* Intel Low Pin Count I/F */
COMPAT_INTEL_MICROCODE, /* Intel microcode update */
COMPAT_MEMORY_SPD, /* Memory SPD information */
COMPAT_INTEL_PANTHERPOINT_AHCI, /* Intel Pantherpoint AHCI */
COMPAT_COUNT,
};
......
......@@ -75,6 +75,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(COMPAT_INTEL_LPC, "intel,lpc"),
COMPAT(INTEL_MICROCODE, "intel,microcode"),
COMPAT(MEMORY_SPD, "memory-spd"),
COMPAT(INTEL_PANTHERPOINT_AHCI, "intel,pantherpoint-ahci"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment