Commit 401f2d91 authored by Lokesh Vutla's avatar Lokesh Vutla Committed by Tom Rini

ARM: keystone2: configs: Move SP to end of u-boot section

Currently u-boot stack is defined at the beginning of MSMC RAM.
This is a problem for uart boot mode as ROM downloads directly to
starting of MSMC RAM.
Fixing it by moving stack to the end of u-boot section and shifting
SYS_TEXT_BASE to the start of MSMC RAM.
Updated division of MSMC RAM is shown below:
	-----------------------------------------
	|		|	|		|
	| U-Boot text	|U-Boot	| SPL text	|
	| download	| Stack	| Download +	|
	|		|	| SPL_BSS +	|
	|		|	| SPL_STACK	|
	-----------------------------------------
	[1]		[2]	[3]		[4]

[1] SYS_TEXT_BASE (Start of MSMC RAM)
[2] SPL_TEXT_BASE - GBL_DATA_SIZE
[3] SPL_TEXT_BASE
[4] END of SPL

[1] + [2] is at least 1M on all platforms, so no chance of overlap.
Reviewed-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
parent a85da21f
......@@ -20,7 +20,7 @@
/* SoC Configuration */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_ARCH_TIMER
#define CONFIG_SYS_TEXT_BASE 0x0c001000
#define CONFIG_SYS_TEXT_BASE 0x0c000000
#define CONFIG_SPL_TARGET "u-boot-spi.gph"
#define CONFIG_SYS_DCACHE_OFF
......@@ -29,7 +29,7 @@
#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - \
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \
GENERATED_GBL_DATA_SIZE)
/* SPL SPI Loader Configuration */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment