Commit 421376ae authored by Masahiro Yamada's avatar Masahiro Yamada

ARM: UniPhier: add environment sets for non-FIT Linux boot

Currently, the environment variables "norboot" and "nandboot" only
work with CONFIG_FIT, but we do not want to depend on CONFIG_FIT to
boot the kernel.

This commit adds environments useful for booting Linux with separate
uImage + ramdisk + DTB.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 6b71e6d7
......@@ -209,7 +209,6 @@
#define CONFIG_LOADADDR 0x84000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_BOOTFILE "fit.itb"
#define CONFIG_CMDLINE_EDITING /* add command line history */
......@@ -224,23 +223,49 @@
#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init"
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"image_offset=0x00080000\0" \
"image_size=0x00f00000\0" \
"verify=n\0" \
"nandupdate=nand erase 0 0x100000 &&" \
"tftpboot u-boot-spl.bin &&" \
"nand write $loadaddr 0 0x10000 &&" \
"tftpboot u-boot-dtb.img &&" \
"nand write $loadaddr 0x10000 0xf0000\0" \
"norboot=run add_default_bootargs &&" \
"bootm $image_offset\0" \
"nandboot=run add_default_bootargs &&" \
"nand read $loadaddr $image_offset $image_size &&" \
"bootm\0" \
"add_default_bootargs=setenv bootargs $bootargs" \
" console=ttyS0,$baudrate\0" \
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
#define LINUXBOOT_ENV_SETTINGS \
"fit_addr=0x00100000\0" \
"fit_addr_r=0x84100000\0" \
"fit_size=0x00f00000\0" \
"norboot=run add_default_bootargs &&" \
"bootm $fit_addr\0" \
"nandboot=run add_default_bootargs &&" \
"nand read $fit_addr_r $fit_addr $fit_size &&" \
"bootm $fit_addr_r\0"
#else
#define CONFIG_BOOTFILE "uImage"
#define LINUXBOOT_ENV_SETTINGS \
"fdt_addr=0x00100000\0" \
"fdt_addr_r=0x84100000\0" \
"fdt_size=0x00008000\0" \
"kernel_addr=0x00200000\0" \
"kernel_addr_r=0x84200000\0" \
"kernel_size=0x00800000\0" \
"ramdisk_addr=0x00a00000\0" \
"ramdisk_addr_r=0x84a00000\0" \
"ramdisk_size=0x00600000\0" \
"norboot=run add_default_bootargs &&" \
"bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
"nandboot=run add_default_bootargs &&" \
"nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"verify=n\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
"tftpboot u-boot-spl.bin &&" \
"nand write $loadaddr 0 0x00010000 &&" \
"tftpboot u-boot-dtb.img &&" \
"nand write $loadaddr 0x00010000 0x000f0000\0" \
"add_default_bootargs=setenv bootargs $bootargs" \
" console=ttyS0,$baudrate\0" \
LINUXBOOT_ENV_SETTINGS
/* Open Firmware flat tree */
#define CONFIG_OF_LIBFDT
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment