Commit 4585601a authored by Simon Glass's avatar Simon Glass Committed by Tom Rini

Convert CONFIG_ARCH_MISC_INIT to Kconfig

This converts the following to Kconfig:
   CONFIG_ARCH_MISC_INIT
Signed-off-by: 's avatarSimon Glass <sjg@chromium.org>
parent a5d67547
......@@ -26,6 +26,7 @@ config AVR32
config BLACKFIN
bool "Blackfin architecture"
select ARCH_MISC_INIT
config M68K
bool "M68000 architecture"
......
......@@ -202,6 +202,7 @@ config KIRKWOOD
bool "Marvell Kirkwood"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
config ARCH_MVEBU
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
......@@ -517,6 +518,7 @@ config ARCH_MX7
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
config ARCH_MX6
bool "Freescale MX6"
......@@ -630,6 +632,7 @@ config ARCH_SOCFPGA
select DM_SPI
select ENABLE_ARM_SOC_BOOT0_HOOK
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
config TARGET_CM_T43
bool "Support cm_t43"
......@@ -754,6 +757,7 @@ config TARGET_LS2080A_EMU
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
help
Support for Freescale LS2080A_EMU platform
The LS2080A Development System (EMULATOR) is a pre silicon
......@@ -765,6 +769,7 @@ config TARGET_LS2080A_SIMU
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
help
Support for Freescale LS2080A_SIMU platform
The LS2080A Development System (QDS) is a pre silicon
......@@ -778,6 +783,7 @@ config TARGET_LS2080AQDS
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
help
Support for Freescale LS2080AQDS platform
The LS2080A Development System (QDS) is a high-performance
......@@ -791,6 +797,7 @@ config TARGET_LS2080ARDB
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
help
Support for Freescale LS2080ARDB platform.
The LS2080A Reference design board (RDB) is a high-performance
......
......@@ -9,6 +9,7 @@ config ARMADA_32BIT
select SPL_OF_CONTROL
select SPL_SIMPLE_BUS
select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
config ARMADA_64BIT
bool
......
......@@ -171,8 +171,6 @@
}
#endif
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_CPU CONFIG_BFIN_CPU
#endif
......@@ -410,6 +410,14 @@ config ARCH_EARLY_INIT_R
is on. Note that board_early_init_r() is called first, if
enabled. This can be used to set up architecture-specific devices.
config ARCH_MISC_INIT
bool "Call arch-specific init after relocation, when console is ready"
help
With this option U-Boot will call arch_misc_init() after
relocation to allow miscellaneous arch-dependent initialisation
to be performed. This function should be defined by the board
and will be called after the console is set up, after relocaiton.
config BOARD_EARLY_INIT_F
bool "Call board-specific init before relocation"
default y if X86
......
......@@ -21,6 +21,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
......
......@@ -8,6 +8,7 @@ CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
......
......@@ -11,6 +11,7 @@ CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
......
......@@ -9,6 +9,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
......
......@@ -8,6 +8,7 @@ CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
......
......@@ -7,6 +7,7 @@ CONFIG_FIT=y
CONFIG_NOR_BOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
......
......@@ -11,6 +11,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SPI_BOOT"
CONFIG_SPI_BOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
......
......@@ -7,6 +7,7 @@ CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_MTD_SUPPORT=y
......
......@@ -7,6 +7,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SYS_PROMPT="Apalis T30 # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
......
......@@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_BOOTDELAY=1
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
......
......@@ -19,6 +19,7 @@ CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_ARCH_EARLY_INIT_R is not set
# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
......
......@@ -8,6 +8,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
......
......@@ -18,6 +18,7 @@ CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
......
......@@ -18,6 +18,7 @@ CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_MUSB_NEW_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
......
......@@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
......
......@@ -19,6 +19,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
......
......@@ -22,6 +22,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
......
......@@ -17,6 +17,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
......
......@@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri"
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SYS_PROMPT="Colibri T20 # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
......
......@@ -7,6 +7,7 @@ CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SYS_PROMPT="Colibri T30 # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
......
......@@ -5,6 +5,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,ENV_I
CONFIG_BOOTDELAY=1
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="Colibri VFxx # "
......
......@@ -16,6 +16,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
......
......@@ -15,6 +15,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
......
......@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
......
......@@ -8,6 +8,7 @@ CONFIG_IDENT_STRING=" EDMiniV2"
# CONFIG_MMC is not set
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
......
......@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
......
......@@ -12,6 +12,7 @@ CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
......
......@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
......
......@@ -18,6 +18,7 @@ CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_BOARD_EARLY_INIT_F is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
......
......@@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_IMLS is not set
......
......@@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -11,6 +11,7 @@ CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
......
......@@ -17,6 +17,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
......
......@@ -17,6 +17,7 @@ CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_NET_SUPPORT=y
......
......@@ -17,6 +17,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL=y
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
......
......@@ -25,6 +25,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
......
......@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
......
......@@ -26,6 +26,7 @@ CONFIG_ARCH_EARLY_INIT_R=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
......
......@@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
......
......@@ -7,6 +7,7 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_BOOTDELAY=3
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
......
......@@ -15,6 +15,7 @@ CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
# CONFIG_CMD_IMLS is not set
......
......@@ -21,6 +21,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_AUTOBOOT_KEYED=y
......
......@@ -8,6 +8,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
......
......@@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_HUSH_PARSER=y
......
......@@ -260,7 +260,6 @@
* and DFU.
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
......
......@@ -13,8 +13,6 @@
#include "tegra30-common.h"
#define CONFIG_ARCH_MISC_INIT
/* High-level configuration options */
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
......
......@@ -35,7 +35,6 @@
* to enable certain macros
*/
#include "mv-common.h"
#undef CONFIG_ARCH_MISC_INIT
/*
* Environment variables configurations
......
......@@ -293,7 +293,6 @@
* and DFU.
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
......
......@@ -430,7 +430,6 @@ DEFAULT_LINUX_BOOT_ENV \
* and DFU.
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
......
......@@ -14,7 +14,6 @@
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,usbkbd\0" \
"stdout=serial,vidconsole\0" \
......
......@@ -232,7 +232,6 @@ MMCARGS
/* USB configuration */
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
......
......@@ -108,7 +108,6 @@ BUR_COMMON_ENV \
/* USB configuration */
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
......
......@@ -19,8 +19,6 @@
/*#define CONFIG_DBG_MONITOR*/
#define PHYS_SDRAM_SIZE SZ_512M
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
......
......@@ -11,8 +11,6 @@
#include "tegra20-common.h"
#define CONFIG_ARCH_MISC_INIT
/* High-level configuration options */
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
......
......@@ -13,8 +13,6 @@
#include "tegra30-common.h"
#define CONFIG_ARCH_MISC_INIT
/* High-level configuration options */
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
......
......@@ -18,7 +18,6 @@
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_FSL_CLK
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
#define CONFIG_SKIP_LOWLEVEL_INIT
......
......@@ -14,7 +14,6 @@
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
"stdout=serial\0" \
......
......@@ -209,7 +209,6 @@
* Other required minimal configurations
*/
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_LOAD_ADDR 0x00800000
......
......@@ -14,7 +14,6 @@
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_ARCH_MISC_INIT
/* ns16550 UART is memory-mapped in Quark SoC */
#undef CONFIG_SYS_NS16550_PORT_MAPPED
......
......@@ -79,7 +79,6 @@
* to enable certain macros
*/
#include "mv-common.h"
#undef CONFIG_ARCH_MISC_INIT
#ifdef CONFIG_SYS_NS16550_COM1
#undef CONFIG_SYS_NS16550_COM1
......
......@@ -147,7 +147,6 @@
* Other required minimal configurations
*/
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
#define CONFIG_NR_DRAM_BANKS 4
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
......
......@@ -20,7 +20,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
/* We need architecture specific misc initializations */
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_FSL_CAAM /* Enable SEC/CAAM */
......
......@@ -14,7 +14,6 @@
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_SMSC_LPC47M
......
......@@ -84,7 +84,6 @@
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
#define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
......
......@@ -29,8 +29,6 @@
/* Enable iomux-lpsr support */
#define CONFIG_IOMUX_LPSR
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_LOADADDR 0x80800000
#define CONFIG_SYS_TEXT_BASE 0x87800000
......
......@@ -42,7 +42,6 @@
*/
/* Startup hooks */
#define CONFIG_ARCH_MISC_INIT
/* SPL */
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
......
......@@ -132,7 +132,6 @@
* USB configuration
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
......
......@@ -183,7 +183,6 @@
* add mass storage support.
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#define CONFIG_AM335X_USB0
......
......@@ -190,7 +190,6 @@
* USB configuration
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
#undef CONFIG_USB_GADGET_DUALSPEED
......
......@@ -15,7 +15,6 @@
* High level configuration
*/
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_ARCH_MISC_INIT