Commit 46f3e385 authored by Kumar Gala's avatar Kumar Gala

powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641

The MPC8641 boards actually only have PCIE not PCI.  Rename so we are
uniform with regards to names so we can replace this code with templated
code.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent dd2cda3d
/*
* Copyright 2008 Freescale Semiconductor, Inc.
* Copyright 2008,2010 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
......@@ -32,14 +32,14 @@
*
* 0x0000_0000 0x7fff_ffff DDR 2G
* if PCI (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
* 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
* 0x8000_0000 0x9fff_ffff PCIE1 MEM 512M
* 0xa000_0000 0xbfff_ffff PCIE2 MEM 512M
* else if RIO (prepend 0xc_0000_0000 if CONFIG_PHYS_64BIT)
* 0x8000_0000 0x9fff_ffff RapidIO 512M
* endif
* (prepend 0xf_0000_0000 if CONFIG_PHYS_64BIT)
* 0xffc0_0000 0xffc0_ffff PCI1 IO 64K
* 0xffc1_0000 0xffc1_ffff PCI2 IO 64K
* 0xffc0_0000 0xffc0_ffff PCIE1 IO 64K
* 0xffc1_0000 0xffc1_ffff PCIE2 IO 64K
* 0xffe0_0000 0xffef_ffff CCSRBAR 1M
* 0xffdf_0000 0xffe0_0000 PIXIS, CF 64K
* 0xef80_0000 0xefff_ffff FLASH (boot bank) 8M
......@@ -54,10 +54,10 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
#endif
#ifdef CONFIG_PCI
SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2),
#elif defined(CONFIG_RIO)
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
#endif
......
/*
* Copyright 2006, 2007 Freescale Semiconductor.
* Copyright 2006, 2007, 2010 Freescale Semiconductor.
*
* See file CREDITS for list of people who contributed to this
* project.
......@@ -129,21 +129,21 @@ fixed_sdram(void)
#if defined(CONFIG_PCI)
static struct pci_controller pci1_hose;
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCI */
#ifdef CONFIG_PCI2
static struct pci_controller pci2_hose;
#endif /* CONFIG_PCI2 */
#ifdef CONFIG_PCIE2
static struct pci_controller pcie2_hose;
#endif /* CONFIG_PCIE2 */
int first_free_busno = 0;
void pci_init_board(void)
{
#ifdef CONFIG_PCI1
#ifdef CONFIG_PCIE1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pci1_hose;
struct pci_controller *hose = &pcie1_hose;
struct pci_region *r = hose->regions;
volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
......@@ -169,16 +169,16 @@ void pci_init_board(void)
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCI1_MEM_BUS,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
CONFIG_SYS_PCIE1_MEM_BUS,
CONFIG_SYS_PCIE1_MEM_PHYS,
CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCI1_IO_BUS,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
CONFIG_SYS_PCIE1_IO_BUS,
CONFIG_SYS_PCIE1_IO_PHYS,
CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
......@@ -195,8 +195,8 @@ void pci_init_board(void)
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
+ CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
+ CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
} else {
puts("PCI-EXPRESS 1: Disabled\n");
......@@ -204,26 +204,26 @@ void pci_init_board(void)
}
#else
puts("PCI-EXPRESS1: Disabled\n");
#endif /* CONFIG_PCI1 */
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCI2
#ifdef CONFIG_PCIE2
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
struct pci_controller *hose = &pci2_hose;
struct pci_controller *hose = &pcie2_hose;
struct pci_region *r = hose->regions;
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCI2_MEM_BUS,
CONFIG_SYS_PCI2_MEM_PHYS,
CONFIG_SYS_PCI2_MEM_SIZE,
CONFIG_SYS_PCIE2_MEM_BUS,
CONFIG_SYS_PCIE2_MEM_PHYS,
CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCI2_IO_BUS,
CONFIG_SYS_PCI2_IO_PHYS,
CONFIG_SYS_PCI2_IO_SIZE,
CONFIG_SYS_PCIE2_IO_BUS,
CONFIG_SYS_PCIE2_IO_PHYS,
CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
......@@ -238,7 +238,7 @@ void pci_init_board(void)
}
#else
puts("PCI-EXPRESS 2: Disabled\n");
#endif /* CONFIG_PCI2 */
#endif /* CONFIG_PCIE2 */
}
......@@ -253,11 +253,11 @@ ft_board_setup(void *blob, bd_t *bd)
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI1
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#ifdef CONFIG_PCIE1
ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
#endif
#ifdef CONFIG_PCI2
ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
#ifdef CONFIG_PCIE2
ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
#endif
/*
......
......@@ -32,11 +32,11 @@
*
* 0x0000_0000 DDR 256M
* 0x1000_0000 DDR2 256M
* 0x8000_0000 PCI1 MEM 512M
* 0xa000_0000 PCI2 MEM 512M
* 0x8000_0000 PCIE1 MEM 512M
* 0xa000_0000 PCIE2 MEM 512M
* 0xc000_0000 RapidIO 512M
* 0xe200_0000 PCI1 IO 16M
* 0xe300_0000 PCI2 IO 16M
* 0xe200_0000 PCIE1 IO 16M
* 0xe300_0000 PCIE2 IO 16M
* 0xf800_0000 CCSRBAR 2M
* 0xfe00_0000 FLASH (boot bank) 32M
*
......@@ -49,11 +49,11 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
#endif
SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
};
......
......@@ -191,16 +191,16 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = {
};
#endif
static struct pci_controller pci1_hose = {
static struct pci_controller pcie1_hose = {
#ifndef CONFIG_PCI_PNP
config_table:pci_mpc86xxcts_config_table
#endif
};
#endif /* CONFIG_PCI */
#ifdef CONFIG_PCI2
static struct pci_controller pci2_hose;
#endif /* CONFIG_PCI2 */
#ifdef CONFIG_PCIE2
static struct pci_controller pcie2_hose;
#endif /* CONFIG_PCIE2 */
int first_free_busno = 0;
......@@ -212,10 +212,10 @@ void pci_init_board(void)
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
>> MPC8641_PORDEVSR_IO_SEL_SHIFT;
#ifdef CONFIG_PCI1
#ifdef CONFIG_PCIE1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pci1_hose;
struct pci_controller *hose = &pcie1_hose;
struct pci_region *r = hose->regions;
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
......@@ -236,16 +236,16 @@ void pci_init_board(void)
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCI1_MEM_BUS,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
CONFIG_SYS_PCIE1_MEM_BUS,
CONFIG_SYS_PCIE1_MEM_PHYS,
CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCI1_IO_BUS,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
CONFIG_SYS_PCIE1_IO_BUS,
CONFIG_SYS_PCIE1_IO_PHYS,
CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
......@@ -264,26 +264,26 @@ void pci_init_board(void)
}
#else
puts("PCI-EXPRESS1: Disabled\n");
#endif /* CONFIG_PCI1 */
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCI2
#ifdef CONFIG_PCIE2
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
struct pci_controller *hose = &pci2_hose;
struct pci_controller *hose = &pcie2_hose;
struct pci_region *r = hose->regions;
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCI2_MEM_BUS,
CONFIG_SYS_PCI2_MEM_PHYS,
CONFIG_SYS_PCI2_MEM_SIZE,
CONFIG_SYS_PCIE2_MEM_BUS,
CONFIG_SYS_PCIE2_MEM_PHYS,
CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
CONFIG_SYS_PCI2_IO_BUS,
CONFIG_SYS_PCI2_IO_PHYS,
CONFIG_SYS_PCI2_IO_SIZE,
CONFIG_SYS_PCIE2_IO_BUS,
CONFIG_SYS_PCIE2_IO_PHYS,
CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
......@@ -298,7 +298,7 @@ void pci_init_board(void)
}
#else
puts("PCI-EXPRESS 2: Disabled\n");
#endif /* CONFIG_PCI2 */
#endif /* CONFIG_PCIE2 */
}
......@@ -308,11 +308,11 @@ void ft_board_setup (void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI1
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#ifdef CONFIG_PCIE1
ft_fsl_pci_setup(blob, "pci0", &pcie1_hose);
#endif
#ifdef CONFIG_PCI2
ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
#ifdef CONFIG_PCIE2
ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
#endif
}
#endif
......
/*
* Copyright 2006 Freescale Semiconductor.
* Copyright 2006, 2010 Freescale Semiconductor.
*
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
*
......@@ -58,8 +58,8 @@
#ifndef CONFIG_RIO /* RIO/PCI are mutually exclusive */
#define CONFIG_PCI 1 /* Enable PCI/PCIE */
#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */
#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */
#define CONFIG_PCIE1 1 /* PCIE controler 1 (ULI bridge) */
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
#endif
......@@ -325,43 +325,43 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Addresses are mapped 1-1.
*/
#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000
#define CONFIG_SYS_PCI1_MEM_PHYS 0x0000000c00000000ULL
#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS 0x0000000c00000000ULL
#else
#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_VIRT
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_VIRT
#define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT
#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_VIRT
#endif
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
#define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000
#define CONFIG_SYS_PCI1_IO_PHYS (CONFIG_SYS_PCI1_IO_VIRT \
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
#define CONFIG_SYS_PCIE1_IO_PHYS (CONFIG_SYS_PCIE1_IO_VIRT \
| CONFIG_SYS_PHYS_ADDR_HIGH)
#define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64K */
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */
#ifdef CONFIG_PHYS_64BIT
/*
* Use the same PCI bus address on PCI1 and PCI2 if we have PHYS_64BIT.
* Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT.
* This will increase the amount of PCI address space available for
* for mapping RAM.
*/
#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_BUS CONFIG_SYS_PCIE1_MEM_BUS
#else
#define CONFIG_SYS_PCI2_MEM_BUS (CONFIG_SYS_PCI1_MEM_BUS \
+ CONFIG_SYS_PCI1_MEM_SIZE)
#define CONFIG_SYS_PCIE2_MEM_BUS (CONFIG_SYS_PCIE1_MEM_BUS \
+ CONFIG_SYS_PCIE1_MEM_SIZE)
#endif
#define CONFIG_SYS_PCI2_MEM_VIRT (CONFIG_SYS_PCI1_MEM_VIRT \
+ CONFIG_SYS_PCI1_MEM_SIZE)
#define CONFIG_SYS_PCI2_MEM_PHYS (CONFIG_SYS_PCI1_MEM_PHYS \
+ CONFIG_SYS_PCI1_MEM_SIZE)
#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
#define CONFIG_SYS_PCI2_IO_VIRT (CONFIG_SYS_PCI1_IO_VIRT \
+ CONFIG_SYS_PCI1_IO_SIZE)
#define CONFIG_SYS_PCI2_IO_PHYS (CONFIG_SYS_PCI1_IO_PHYS \
+ CONFIG_SYS_PCI1_IO_SIZE)
#define CONFIG_SYS_PCI2_IO_SIZE CONFIG_SYS_PCI1_IO_SIZE
#define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \
+ CONFIG_SYS_PCIE1_MEM_SIZE)
#define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \
+ CONFIG_SYS_PCIE1_MEM_SIZE)
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \
+ CONFIG_SYS_PCIE1_IO_SIZE)
#define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \
+ CONFIG_SYS_PCIE1_IO_SIZE)
#define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE
#if defined(CONFIG_PCI)
......@@ -390,10 +390,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
/*PCIE video card used*/
#define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_VIRT
#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT
/*PCI video card used*/
/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/
/*#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT*/
/* video */
#define CONFIG_VIDEO
......@@ -406,7 +406,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_ATI_RADEON_FB
#define CONFIG_VIDEO_LOGO
/*#define CONFIG_CONSOLE_CURSOR*/
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_VIRT
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT
#endif
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
......@@ -422,8 +422,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE
#endif
#define CONFIG_MPC86XX_PCI2
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
......@@ -494,17 +492,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U
/* if CONFIG_PCI:
* BAT2 PCI1 and PCI1 MEM
* BAT2 PCIE1 and PCIE1 MEM
* if CONFIG_RIO
* BAT2 Rapidio Memory
*/
#ifdef CONFIG_PCI
#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G \
#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \
| BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_MEM_PHYS) \
#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
#else /* CONFIG_RIO */
......@@ -553,14 +551,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#endif
/*
* BAT4 PCI1_IO and PCI2_IO
* BAT4 PCIE1_IO and PCIE2_IO
*/
#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
#define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT \
| BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_128K \
#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \
| BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCI1_IO_PHYS) \
#define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS) \
| BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U
......
......@@ -56,8 +56,8 @@
#define CONFIG_SYS_SCRATCH_VA 0xe8000000
#define CONFIG_PCI 1 /* Enable PCIE */
#define CONFIG_PCI1 1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCI2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
......@@ -304,23 +304,23 @@
* General PCI
* Addresses are mapped 1-1.
*/
#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_VIRT CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_PCI1_IO_BUS 0xe2000000
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BUS
#define CONFIG_SYS_PCI1_IO_VIRT CONFIG_SYS_PCI1_IO_BUS
#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */
#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS
#define CONFIG_SYS_PCI2_MEM_VIRT CONFIG_SYS_PCI2_MEM_BUS
#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
#define CONFIG_SYS_PCI2_IO_BUS 0xe3000000
#define CONFIG_SYS_PCI2_IO_PHYS CONFIG_SYS_PCI2_IO_BUS
#define CONFIG_SYS_PCI2_IO_VIRT CONFIG_SYS_PCI2_IO_BUS
#define CONFIG_SYS_PCI2_IO_SIZE 0x1000000 /* 16M */
#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000
#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS
#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS
#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */
#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000
#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS
#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS
#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */
#if defined(CONFIG_PCI)
......@@ -406,10 +406,10 @@
* 0xa000_0000 512M PCI-Express 2 Memory
* Changed it for operating from 0xd0000000
*/
#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \
#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U
/*
......@@ -449,10 +449,10 @@
* 0xe300_0000 16M PCI-Express 2 I/0
* Note that this is at 0xe0000000
*/
#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \
#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U
/*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment