Commit 47c5455a authored by Helmut Raiger's avatar Helmut Raiger Committed by Albert ARIBAUD

mx31: provide readable WEIM CS accessor

setup_weimcs() and some macros are added to support the setup
for i.MX31 WEIM chip selects. As a compromise between verbosity
and readability an ASCII-art'ish bit comment is used instead of
bitfields.
All i.MX31 boards have been patched to use this approach using a
helper program to verify the changes.
Signed-off-by: default avatarHelmut Raiger <helmut.raiger@hale.at>
Acked-by: default avatarStefano Babic <sbabic@denx.de>
parent 43883dc3
......@@ -25,6 +25,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
......@@ -140,6 +141,16 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
}
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs)
{
struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE;
struct mx31_weim_cscr *cscr = &weim->cscr[cs];
writel(weimcs->upper, &cscr->upper);
writel(weimcs->lower, &cscr->lower);
writel(weimcs->additional, &cscr->additional);
}
struct mx3_cpu_type mx31_cpu_type[] = {
{ .srev = 0x00, .v = 0x10 },
{ .srev = 0x10, .v = 0x11 },
......
......@@ -472,6 +472,18 @@ enum iomux_pins {
#define CCM_RCSR_NF16B (1 << 31)
#define CCM_RCSR_NFMS (1 << 30)
/* WEIM CS control registers */
struct mx31_weim_cscr {
u32 upper;
u32 lower;
u32 additional;
u32 reserved;
};
struct mx31_weim {
struct mx31_weim_cscr cscr[6];
};
#endif
#define __REG(x) (*((volatile u32 *)(x)))
......@@ -550,10 +562,27 @@ enum iomux_pins {
#define ESDCTL_BL(x) ((x) << 7)
#define ESDCTL_PRCT(x) ((x) << 0)
/* 13 fields of the upper CS control register */
#define CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
cnc, wsc, ew, wws, edc) \
((sp) << 31 | (wp) << 30 | (bcd) << 28 | (psz) << 22 | (pme) << 21 |\
(sync) << 20 | (dol) << 16 | (cnc) << 14 | (wsc) << 8 | (ew) << 7 |\
(wws) << 4 | (edc) << 0)
/* 12 fields of the lower CS control register */
#define CSCR_L(oea, oen, ebwa, ebwn, \
csa, ebc, dsz, csn, psr, cre, wrap, csen) \
((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
(csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
(psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
/* 14 fields of the additional CS control register */
#define CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
wwu, age, cnc2, fce) \
((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
(mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
(dww) << 6 | (dct) << 4 | (wwu) << 3 |\
(age) << 2 | (cnc2) << 1 | (fce) << 0)
#define WEIM_BASE 0xb8002000
#define CSCR_U(x) (WEIM_BASE + (x) * 0x10)
#define CSCR_L(x) (WEIM_BASE + 4 + (x) * 0x10)
#define CSCR_A(x) (WEIM_BASE + 8 + (x) * 0x10)
#define IOMUXC_BASE 0x43FAC000
#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
......
/*
* (C) Copyright 2011
* Helmut Raiger, HALE electronic GmbH, helmut.raiger@hale.at
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
struct mxc_weimcs {
u32 upper;
u32 lower;
u32 additional;
};
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs);
#endif
......@@ -25,6 +25,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <nand.h>
#include <fsl_pmic.h>
......@@ -61,11 +62,17 @@ static void qong_fpga_reset(void)
int board_early_init_f (void)
{
#ifdef CONFIG_QONG_FPGA
/* CS1: FPGA/Network Controller/GPIO */
/* 16-bit, no DTACK */
__REG(CSCR_U(1)) = 0x00000A01;
__REG(CSCR_L(1)) = 0x20040501;
__REG(CSCR_A(1)) = 0x04020C00;
/* CS1: FPGA/Network Controller/GPIO, 16-bit, no DTACK */
static const struct mxc_weimcs cs1 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 10, 0, 0, 1),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 0, 0, 4, 0, 0, 5, 0, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 4, 0, 2, 0, 0, 3, 0, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(1, &cs1);
/* setup pins for FPGA */
mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO));
......@@ -146,50 +153,16 @@ int board_init (void)
/* Chip selects */
/* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */
/* Assumptions: HCLK = 133 MHz, tACC = 130ns */
__REG(CSCR_U(0)) = ((0 << 31) | /* SP */
(0 << 30) | /* WP */
(0 << 28) | /* BCD */
(0 << 24) | /* BCS */
(0 << 22) | /* PSZ */
(0 << 21) | /* PME */
(0 << 20) | /* SYNC */
(0 << 16) | /* DOL */
(3 << 14) | /* CNC */
(21 << 8) | /* WSC */
(0 << 7) | /* EW */
(0 << 4) | /* WWS */
(6 << 0) /* EDC */
);
__REG(CSCR_L(0)) = ((2 << 28) | /* OEA */
(1 << 24) | /* OEN */
(3 << 20) | /* EBWA */
(3 << 16) | /* EBWN */
(1 << 12) | /* CSA */
(1 << 11) | /* EBC */
(5 << 8) | /* DSZ */
(1 << 4) | /* CSN */
(0 << 3) | /* PSR */
(0 << 2) | /* CRE */
(0 << 1) | /* WRAP */
(1 << 0) /* CSEN */
);
__REG(CSCR_A(0)) = ((2 << 28) | /* EBRA */
(1 << 24) | /* EBRN */
(2 << 20) | /* RWA */
(2 << 16) | /* RWN */
(0 << 15) | /* MUM */
(0 << 13) | /* LAH */
(2 << 10) | /* LBN */
(0 << 8) | /* LBA */
(0 << 6) | /* DWW */
(0 << 4) | /* DCT */
(0 << 3) | /* WWU */
(0 << 2) | /* AGE */
(0 << 1) | /* CNC2 */
(0 << 0) /* FCE */
);
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 21, 0, 0, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(0, 1, 3, 3, 1, 1, 5, 1, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 1, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(0, &cs0);
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_QONG;
......@@ -247,11 +220,18 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT)
static void board_nand_setup(void)
{
/* CS3: NAND 8-bit */
__REG(CSCR_U(3)) = 0x00004f00;
__REG(CSCR_L(3)) = 0x20013b31;
__REG(CSCR_A(3)) = 0x00020800;
static const struct mxc_weimcs cs3 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 1, 15, 0, 0, 0),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 0, 0, 1, 3, 1, 3, 3, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 0, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(3, &cs3);
__REG(IOMUXC_GPR) |= 1 << 13;
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO));
......
......@@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
......@@ -48,9 +49,16 @@ int board_early_init_f(void)
* the only non-zero field "Wait State Control" is set to half the
* default value.
*/
__REG(CSCR_U(0)) = 0x00000f00;
__REG(CSCR_L(0)) = 0x10000D03;
__REG(CSCR_A(0)) = 0x00720900;
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(0, &cs0);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
......
......@@ -28,6 +28,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
......@@ -50,9 +51,16 @@ int dram_init(void)
int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
__REG(CSCR_U(5)) = 0x0000d843;
__REG(CSCR_L(5)) = 0x22252521;
__REG(CSCR_A(5)) = 0x22220a00;
static const struct mxc_weimcs cs5 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
mxc_setup_weimcs(5, &cs5);
/* Setup UART1 and SPI2 pins */
mx31_uart1_hw_init();
......
......@@ -27,6 +27,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
......@@ -49,17 +50,39 @@ int board_init(void)
int board_early_init_f(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0x10000d03;
__REG(CSCR_A(0)) = 0x00720900;
/* CS0: Nor Flash */
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
};
/* CS1: Network Controller */
static const struct mxc_weimcs cs1 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
__REG(CSCR_U(1)) = 0x0000df06; /* CS1: Network Controller */
__REG(CSCR_L(1)) = 0x444a4541;
__REG(CSCR_A(1)) = 0x44443302;
/* CS4: SRAM */
static const struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
};
__REG(CSCR_U(4)) = 0x0000d843; /* CS4: SRAM */
__REG(CSCR_L(4)) = 0x22252521;
__REG(CSCR_A(4)) = 0x22220a00;
mxc_setup_weimcs(0, &cs0);
mxc_setup_weimcs(1, &cs1);
mxc_setup_weimcs(4, &cs4);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
......
......@@ -26,6 +26,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
......@@ -39,13 +40,28 @@ int dram_init(void)
int board_early_init_f(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0xa0330d01;
__REG(CSCR_A(0)) = 0x00220800;
/* CS0: Nor Flash */
static const struct mxc_weimcs cs0 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(10, 0, 3, 3, 0, 1, 5, 0, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(0, 0, 2, 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0)
};
__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
__REG(CSCR_L(4)) = 0x444a4541;
__REG(CSCR_A(4)) = 0x44443302;
/* CS4: Network Controller */
static const struct mxc_weimcs cs4 = {
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6),
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
};
mxc_setup_weimcs(0, &cs0);
mxc_setup_weimcs(4, &cs4);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment