Commit 49413ea3 authored by Luka Perkov's avatar Luka Perkov Committed by Luka Perkov

cosmetic: kirkwood: style fixes in kwbimage.cfg files

When diffing through the changes only the relevant changes
should be displayed.
Signed-off-by: 's avatarLuka Perkov <luka@openwrt.org>
Acked-by: 's avatarStefan Roese <sr@denx.de>
parent 37b608a5
......@@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xffd100e0 0x1b1b1b9b
#Dram initalization for SINGLE x16 CL=5 @ 400MHz
# Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xffd01400 0x43000c30 # DDR Configuration register
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
# bit23-14: 0x0,
......@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
# bit6-4: 0x4, CL=5
# bit7: 0x0, TestMode=0 normal
# bit8: 0x0, DLL reset=0 normal
# bit11-9: 0x6, auto-precharge write recovery ????????????
# bit11-9: 0x6, auto-precharge write recovery
# bit12: 0x0, PD must be zero
# bit31-13: 0x0, required
......
......@@ -11,7 +11,7 @@
#
# Boot Media configurations
BOOT_FROM nand # change from nand to uart if building UART image
BOOT_FROM nand
NAND_ECC_MODE default
NAND_PAGE_SIZE 0x0800
......@@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800
# Configure RGMII-0 interface pad voltage to 1.8V
DATA 0xffd100e0 0x1b1b1b9b
#Dram initalization for SINGLE x16 CL=5 @ 400MHz
# Dram initalization for SINGLE x16 CL=5 @ 400MHz
DATA 0xffd01400 0x43000c30 # DDR Configuration register
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
# bit23-14: 0x0,
# bit24: 0x1, enable exit self refresh mode on DDR access
# bit25: 0x1, required
# bit24: 0x1, enable exit self refresh mode on DDR access
# bit25: 0x1, required
# bit29-26: 0x0,
# bit31-30: 0x1,
......@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address Control
# bit3-2: 11, Cs0size (1Gb)
# bit5-4: 00, Cs1width (x8)
# bit7-6: 11, Cs1size (1Gb)
# bit9-8: 00, Cs2width (nonexistent
# bit11-10: 00, Cs2size (nonexistent
# bit13-12: 00, Cs3width (nonexistent
# bit15-14: 00, Cs3size (nonexistent
# bit9-8: 00, Cs2width (nonexistent)
# bit11-10: 00, Cs2size (nonexistent)
# bit13-12: 00, Cs3width (nonexistent)
# bit15-14: 00, Cs3size (nonexistent)
# bit16: 0, Cs0AddrSel
# bit17: 0, Cs1AddrSel
# bit18: 0, Cs2AddrSel
......@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
# bit6-4: 0x4, CL=5
# bit7: 0x0, TestMode=0 normal
# bit8: 0x0, DLL reset=0 normal
# bit11-9: 0x6, auto-precharge write recovery ????????????
# bit11-9: 0x6, auto-precharge write recovery
# bit12: 0x0, PD must be zero
# bit31-13: 0x0, required
......@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Control
DATA 0xffd01480 0x00000001 # DDR Initialization Control
# bit0: 0x1, enable DDR init upon this register write
DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
# End of Header extension
DATA 0x0 0x0
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment