Commit 55ed8ae3 authored by York Sun's avatar York Sun

powerpc: T1042RDB_PI: Split from T1042RDB in Kconfig

Use separated TARGET_T1042RDB_PI to simplify config options.
Remove macro CONFIG_T1042RDB_PI.
Signed-off-by: default avatarYork Sun <york.sun@nxp.com>
parent 5449c98a
......@@ -230,6 +230,12 @@ config TARGET_T1042RDB
select SUPPORT_SPL
select PHYS_64BIT
config TARGET_T1042RDB_PI
bool "Support T1042RDB_PI"
select ARCH_T1042
select SUPPORT_SPL
select PHYS_64BIT
config TARGET_T208XQDS
bool "Support T208xQDS"
select SUPPORT_SPL
......
if TARGET_T1040RDB || TARGET_T1040D4RDB || TARGET_T1042RDB
if TARGET_T1040RDB || TARGET_T1040D4RDB || TARGET_T1042RDB || TARGET_T1042RDB_PI
config SYS_BOARD
default "t104xrdb"
......
......@@ -8,12 +8,12 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042RDB=y
CONFIG_TARGET_T1042RDB_PI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND,SECURE_BOOT"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND,SECURE_BOOT"
CONFIG_BOOTDELAY=0
CONFIG_SILENT_CONSOLE=y
# CONFIG_CONSOLE_MUX is not set
......
......@@ -8,12 +8,12 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042RDB=y
CONFIG_TARGET_T1042RDB_PI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
# CONFIG_CONSOLE_MUX is not set
......
......@@ -8,12 +8,12 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042RDB=y
CONFIG_TARGET_T1042RDB_PI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
# CONFIG_CONSOLE_MUX is not set
......
......@@ -9,12 +9,12 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_VIDEO=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042RDB=y
CONFIG_TARGET_T1042RDB_PI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="T1042RDB_PI,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
# CONFIG_CONSOLE_MUX is not set
......
CONFIG_PPC=y
CONFIG_VIDEO=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042RDB=y
CONFIG_TARGET_T1042RDB_PI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="T1042RDB_PI"
CONFIG_BOOTDELAY=10
CONFIG_SILENT_CONSOLE=y
# CONFIG_CONSOLE_MUX is not set
......
......@@ -60,7 +60,7 @@
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
#endif
#ifdef CONFIG_T1042RDB_PI
#ifdef CONFIG_TARGET_T1042RDB_PI
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
#endif
......@@ -94,7 +94,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
#endif
#ifdef CONFIG_T1042RDB_PI
#ifdef CONFIG_TARGET_T1042RDB_PI
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
#endif
......@@ -128,7 +128,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
#endif
#ifdef CONFIG_T1042RDB_PI
#ifdef CONFIG_TARGET_T1042RDB_PI
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
#endif
......@@ -342,7 +342,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#define CPLD_LBMAP_RESET 0xFF
#define CPLD_LBMAP_SHIFT 0x03
#if defined(CONFIG_T1042RDB_PI)
#if defined(CONFIG_TARGET_T1042RDB_PI)
#define CPLD_DIU_SEL_DFP 0x80
#elif defined(CONFIG_T1042D4RDB)
#define CPLD_DIU_SEL_DFP 0xc0
......@@ -516,7 +516,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
#if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
/* Video */
#define CONFIG_FSL_DIU_FB
......@@ -551,7 +551,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#define I2C_MUX_CH_DEFAULT 0x8
#endif
#if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
/* LDI/DVI Encoder for display */
#define CONFIG_SYS_I2C_LDI_ADDR 0x38
#define CONFIG_SYS_I2C_DVI_ADDR 0x75
......@@ -803,7 +803,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
/*
* Command line configuration.
*/
#ifdef CONFIG_T1042RDB_PI
#ifdef CONFIG_TARGET_T1042RDB_PI
#define CONFIG_CMD_DATE
#endif
#define CONFIG_CMD_ERRATA
......@@ -883,7 +883,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
#ifdef CONFIG_TARGET_T1040RDB
#define FDTFILE "t1040rdb/t1040rdb.dtb"
#elif defined(CONFIG_T1042RDB_PI)
#elif defined(CONFIG_TARGET_T1042RDB_PI)
#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb"
#elif defined(CONFIG_T1042RDB)
#define FDTFILE "t1042rdb/t1042rdb.dtb"
......
......@@ -7829,7 +7829,6 @@ CONFIG_T1024RDB
CONFIG_T1040QDS
CONFIG_T1042D4RDB
CONFIG_T1042RDB
CONFIG_T1042RDB_PI
CONFIG_T104XD4RDB
CONFIG_T104xRDB
CONFIG_T2080QDS
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment