Commit 59ac9729 authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: bf537-srv1: new board port

Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent d7fdc141
......@@ -886,6 +886,7 @@ Martin Strubel <strubel@section5.ch>
Blackfin Team <u-boot-devel@blackfin.uclinux.org>
BF537-minotaur BF537
BF537-srv1 BF537
#########################################################################
# End of MAINTAINERS list #
......
......@@ -804,6 +804,7 @@ LIST_blackfin=" \
bf533-stamp \
bf537-minotaur \
bf537-pnav \
bf537-srv1 \
bf537-stamp \
bf538f-ezkit \
bf548-ezkit \
......
......@@ -3394,7 +3394,7 @@ BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537
# Misc third party boards
BFIN_BOARDS += bf537-minotaur
BFIN_BOARDS += bf537-minotaur bf537-srv1
$(BFIN_BOARDS:%=%_config) : unconfig
@$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
......@@ -3570,7 +3570,7 @@ clean:
$(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
$(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \
$(obj)board/bf5{33,37}-stamp/u-boot.lds \
$(obj)board/bf537-{minotaur,pnav}/u-boot.lds \
$(obj)board/bf537-{minotaur,pnav,srv1}/u-boot.lds \
$(obj)board/{,t}cm-bf5{27,33,37e,48,61}/u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h
......
#
# U-boot - Makefile
#
# Copyright (c) 2005-2008 Analog Device Inc.
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS-y))
$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
$(obj)u-boot.lds: u-boot.lds.S
$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################
/*
* U-boot - main board file
*
* Copyright (c) 2005-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <netdev.h>
#include <net.h>
#include <asm/blackfin.h>
#include <asm/net.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
printf("Board: Surveyor SRV1 board\n");
printf(" Support: http://www.surveyor.com/\n");
return 0;
}
phys_size_t initdram(int board_type)
{
gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
return gd->bd->bi_memsize;
}
#ifdef CONFIG_BFIN_MAC
static void board_init_enetaddr(uchar *mac_addr)
{
puts("Warning: Generating 'random' MAC address\n");
bfin_gen_rand_mac(mac_addr);
eth_setenv_enetaddr("ethaddr", mac_addr);
}
int board_eth_init(bd_t *bis)
{
return bfin_EMAC_initialize(bis);
}
#endif
int misc_init_r(void)
{
#ifdef CONFIG_BFIN_MAC
uchar enetaddr[6];
if (!eth_getenv_enetaddr("ethaddr", enetaddr))
board_init_enetaddr(enetaddr);
#endif
return 0;
}
#
# Copyright (c) 2005-2008 Analog Device Inc.
#
# (C) Copyright 2001
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
# This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me
LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
# Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
/*
* U-boot - u-boot.lds.S
*
* Copyright (c) 2005-2008 Analog Device Inc.
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/blackfin.h>
#undef ALIGN
#undef ENTRY
#undef bfin
/* If we don't actually load anything into L1 data, this will avoid
* a syntax error. If we do actually load something into L1 data,
* we'll get a linker memory load error (which is what we'd want).
* This is here in the first place so we can quickly test building
* for different CPU's which may lack non-cache L1 data.
*/
#ifndef L1_DATA_B_SRAM
# define L1_DATA_B_SRAM CONFIG_SYS_MONITOR_BASE
# define L1_DATA_B_SRAM_SIZE 0
#endif
OUTPUT_ARCH(bfin)
MEMORY
{
ram : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
l1_code : ORIGIN = L1_INST_SRAM, LENGTH = L1_INST_SRAM_SIZE
l1_data : ORIGIN = L1_DATA_B_SRAM, LENGTH = L1_DATA_B_SRAM_SIZE
}
ENTRY(_start)
SECTIONS
{
.text :
{
cpu/blackfin/start.o (.text .text.*)
#ifdef ENV_IS_EMBEDDED
/* WARNING - the following is hand-optimized to fit within
* the sector before the environment sector. If it throws
* an error during compilation remove an object here to get
* it linked after the configuration sector.
*/
cpu/blackfin/traps.o (.text .text.*)
cpu/blackfin/interrupt.o (.text .text.*)
cpu/blackfin/serial.o (.text .text.*)
common/dlmalloc.o (.text .text.*)
lib_generic/crc32.o (.text .text.*)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text .text.*)
#endif
__initcode_start = .;
cpu/blackfin/initcode.o (.text .text.*)
__initcode_end = .;
*(.text .text.*)
} >ram
.rodata :
{
. = ALIGN(4);
*(.rodata .rodata.*)
*(.rodata1)
*(.eh_frame)
. = ALIGN(4);
} >ram
.data :
{
. = ALIGN(256);
*(.data .data.*)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
} >ram
.u_boot_cmd :
{
___u_boot_cmd_start = .;
*(.u_boot_cmd)
___u_boot_cmd_end = .;
} >ram
.text_l1 :
{
. = ALIGN(4);
__stext_l1 = .;
*(.l1.text)
. = ALIGN(4);
__etext_l1 = .;
} >l1_code AT>ram
__stext_l1_lma = LOADADDR(.text_l1);
.data_l1 :
{
. = ALIGN(4);
__sdata_l1 = .;
*(.l1.data)
*(.l1.bss)
. = ALIGN(4);
__edata_l1 = .;
} >l1_data AT>ram
__sdata_l1_lma = LOADADDR(.data_l1);
.bss :
{
. = ALIGN(4);
__bss_start = .;
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss .bss.*)
*(COMMON)
__bss_end = .;
} >ram
}
/*
* U-boot - Configuration file for CSP Minotaur board
*
* Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch>
* Minotaur config, brushed up for official uClinux dist.
* Parallel flash support disabled, SPI flash boot command
* added ('run flashboot').
*
* Flash image map:
*
* 0x00000000 u-boot bootstrap
* 0x00010000 environment
* 0x00020000 u-boot code
* 0x00030000 uImage.initramfs
*
*/
#ifndef __CONFIG_BF537_SRV1_H__
#define __CONFIG_BF537_SRV1_H__
#include <asm/blackfin-config-pre.h>
/*
* Processor Settings
*/
#define CONFIG_BFIN_CPU bf537-0.2
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
/*
* Clock Settings
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
*/
/* CONFIG_CLKIN_HZ is any value in Hz */
#define CONFIG_CLKIN_HZ 22118400
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
/* 1 = CLKIN / 2 */
#define CONFIG_CLKIN_HALF 0
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
/* 1 = bypass PLL */
#define CONFIG_PLL_BYPASS 0
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
/* Values can range from 0-63 (where 0 means 64) */
#define CONFIG_VCO_MULT 20
/* CCLK_DIV controls the core clock divider */
/* Values can be 1, 2, 4, or 8 ONLY */
#define CONFIG_CCLK_DIV 1
/* SCLK_DIV controls the system clock divider */
/* Values can range from 1-15 */
#define CONFIG_SCLK_DIV 5
/*
* Memory Settings
*/
#define CONFIG_MEM_SIZE 32
#define CONFIG_MEM_ADD_WDTH 9
#define CONFIG_EBIU_SDRRC_VAL 0x2ac
#define CONFIG_EBIU_SDGCTL_VAL 0x91110d
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_SYS_MALLOC_LEN (384 << 10)
/*
* Network Settings
*/
#ifndef __ADSPBF534__
#define CONFIG_BFIN_MAC
#define CONFIG_NETCONSOLE 1
#define CONFIG_NET_MULTI 1
#endif
#ifdef CONFIG_BFIN_MAC
#define CONFIG_IPADDR 192.168.0.15
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_SERVERIP 192.168.0.2
#define CONFIG_HOSTNAME bf537-srv1
#endif
#define CONFIG_SYS_AUTOLOAD "no"
#define CONFIG_ROOTPATH /romfs
/* Use a fixed MAC address for booting up. Firstboot linux
* must fetch a valid MAC from the production server. */
#define CONFIG_ETHADDR 02:80:ad:20:31:42
/*
* Flash Settings
*/
/* We don't have a parallel flash chip there */
#define CONFIG_SYS_NO_FLASH
/*
* SPI Settings
*/
#define CONFIG_BFIN_SPI
#define CONFIG_ENV_SPI_MAX_HZ 30000000
#define CONFIG_SF_DEFAULT_HZ 30000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
/*
* Env Storage Settings
*/
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET 0x10000
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_ENV_SECT_SIZE 0x10000
#define ENV_IS_EMBEDDED_CUSTOM
/*
* I2C settings
*/
#define CONFIG_BFIN_TWI_I2C 1
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
/*
* Misc Settings
*/
#define CONFIG_SYS_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_MISC_INIT_R
#define CONFIG_BAUDRATE 115200
#define CONFIG_UART_CONSOLE 0
#define CONFIG_PANIC_HANG 1
#define CONFIG_RTC_BFIN 1
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_LOADS_ECHO 1
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
# define CONFIG_BOOTDELAY -1
#else
# define CONFIG_BOOTDELAY 5
#endif
#include <config_cmd_default.h>
#ifdef CONFIG_BFIN_MAC
# define CONFIG_CMD_DHCP
# define CONFIG_CMD_PING
#else
# undef CONFIG_CMD_NET
#endif
#define CONFIG_CMD_BOOTLDR
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_ELF
#undef CONFIG_CMD_FLASH
#define CONFIG_CMD_I2C
#undef CONFIG_CMD_IMLS
#define CONFIG_CMD_SF
#define CONFIG_BOOTCOMMAND "run flashboot"
#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
#define CONFIG_SYS_PROMPT "srv1> "
#define BOOT_ENV_SETTINGS \
"update=tftpboot $(loadaddr) u-boot.ldr;" \
"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
"sf erase 0 0x30000;" \
"sf write $(loadaddr) 0 $(filesize)" \
"flashboot=sf read 0x1000000 0x30000 0x320000;" \
"bootm 0x1000000\0"
#ifdef CONFIG_BFIN_MAC
# define NETWORK_ENV_SETTINGS \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):eth0:off\0" \
"ramboot=tftpboot $(loadaddr) linux;" \
"run ramargs;run addip;bootelf\0" \
"nfsboot=tftpboot $(loadaddr) linux;" \
"run nfsargs;run addip;bootelf\0"
#else
# define NETWORK_ENV_SETTINGS
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
NETWORK_ENV_SETTINGS \
"ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
BOOT_ENV_SETTINGS
#include <asm/blackfin-config-post.h>
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment