Commit 5a8dbdc6 authored by Yangbo Lu's avatar Yangbo Lu Committed by York Sun

mmc: fsl_esdhc: Add adapter card type identification support

Add adapter card type identification support by reading
FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function,
define CONFIG_FSL_ESDHC_ADAPTER_IDENT.
Signed-off-by: 's avatarYangbo Lu <yangbo.lu@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
[York Sun: resolve conflicts in README.fsl-esdhc]
Reviewed-by: 's avatarYork Sun <yorksun@freescale.com>
parent fd3a78a5
......@@ -15,6 +15,9 @@
struct arch_global_data {
#if defined(CONFIG_FSL_ESDHC)
u32 sdhc_clk;
#if defined(CONFIG_FSL_ESDHC_ADAPTER_IDENT)
u8 sdhc_adapter;
#endif
#endif
#if defined(CONFIG_8xx)
unsigned long brg_clk;
......
......@@ -115,4 +115,18 @@ void qixis_write_i2c(unsigned int reg, u8 value);
qixis_write_i2c(offsetof(struct qixis, reg), value)
#endif
/* Use for SDHC adapter card type identification and operation */
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
#define QIXIS_SDID_MASK 0x07
#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC45 0x1 /* eMMC Card Rev4.5 */
#define QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY 0x2 /* SD/MMC Legacy Card */
#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC44 0x3 /* eMMC Card Rev4.4 */
#define QIXIS_ESDHC_ADAPTER_TYPE_RSV 0x4 /* Reserved */
#define QIXIS_ESDHC_ADAPTER_TYPE_MMC 0x5 /* MMC Card */
#define QIXIS_ESDHC_ADAPTER_TYPE_SD 0x6 /* SD Card Rev2.0 3.0 */
#define QIXIS_ESDHC_NO_ADAPTER 0x7 /* No Card is Present*/
#define QIXIS_SDCLKIN 0x08
#define QIXIS_SDCLKOUT 0x02
#endif
#endif
CONFIG_SYS_FSL_ESDHC_LE means ESDHC IP is in little-endian mode.
CONFIG_SYS_FSL_ESDHC_BE means ESDHC IP is in big-endian mode.
CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.
Freescale esdhc-specific options
Accessing ESDHC registers can be determined by ESDHC IP's endian
mode or processor's endian mode.
- CONFIG_FSL_ESDHC_ADAPTER_IDENT
Support Freescale adapter card type identification. This is implemented by
operating Qixis FPGA relevant registers. The STAT_PRES1 register has SDHC
Card ID[0:2] bits showing the type of card installed in the SDHC Adapter Slot.
SDHC Card ID[0:2] Adapter Card Type
0b000 reserved
0b001 eMMC Card Rev4.5
0b010 SD/MMC Legacy Card
0b011 eMMC Card Rev4.4
0b100 reserved
0b101 MMC Card
0b110 SD Card Rev2.0/3.0
0b111 No card is present
- CONFIG_SYS_FSL_ESDHC_LE
ESDHC IP is in little-endian mode. Accessing ESDHC registers can be
determined by ESDHC IP's endian mode or processor's endian mode.
- CONFIG_SYS_FSL_ESDHC_BE
ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined
by ESDHC IP's endian mode or processor's endian mode.
- CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.
......@@ -694,6 +694,39 @@ int fsl_esdhc_mmc_init(bd_t *bis)
return fsl_esdhc_initialize(bis, cfg);
}
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
void mmc_adapter_card_type_ident(void)
{
u8 card_id;
u8 value;
card_id = QIXIS_READ(present) & QIXIS_SDID_MASK;
gd->arch.sdhc_adapter = card_id;
switch (card_id) {
case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45:
break;
case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY:
break;
case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44:
value = QIXIS_READ(brdcfg[5]);
value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT);
QIXIS_WRITE(brdcfg[5], value);
break;
case QIXIS_ESDHC_ADAPTER_TYPE_RSV:
break;
case QIXIS_ESDHC_ADAPTER_TYPE_MMC:
break;
case QIXIS_ESDHC_ADAPTER_TYPE_SD:
break;
case QIXIS_ESDHC_NO_ADAPTER:
break;
default:
break;
}
}
#endif
#ifdef CONFIG_OF_LIBFDT
void fdt_fixup_esdhc(void *blob, bd_t *bd)
{
......@@ -709,7 +742,10 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd)
do_fixup_by_compat_u32(blob, compat, "clock-frequency",
gd->arch.sdhc_clk, 1);
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
do_fixup_by_compat_u32(blob, compat, "adapter-type",
(u32)(gd->arch.sdhc_adapter), 1);
#endif
do_fixup_by_compat(blob, compat, "status", "okay",
4 + 1, 1);
}
......
......@@ -1588,6 +1588,9 @@ int mmc_start_init(struct mmc *mmc)
if (mmc->has_init)
return 0;
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
mmc_adapter_card_type_ident();
#endif
board_mmc_power_init();
/* made sure it's not NULL earlier */
......@@ -1739,6 +1742,9 @@ static void do_preinit(void)
list_for_each(entry, &mmc_devices) {
m = list_entry(entry, struct mmc, link);
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
mmc_set_preinit(m, 1);
#endif
if (m->preinit)
mmc_start_init(m);
}
......
......@@ -16,6 +16,9 @@ extern int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data);
extern int mmc_send_status(struct mmc *mmc, int timeout);
extern int mmc_set_blocklen(struct mmc *mmc, int len);
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
void mmc_adapter_card_type_ident(void);
#endif
#ifndef CONFIG_SPL_BUILD
......
......@@ -16,6 +16,10 @@
/* needed for the mmc_cfg definition */
#include <mmc.h>
#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
#include "../board/freescale/common/qixis.h"
#endif
/* FSL eSDHC-specific constants */
#define SYSCTL 0x0002e02c
#define SYSCTL_INITA 0x08000000
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment