Commit 66fca016 authored by Thomas Weber's avatar Thomas Weber Committed by Wolfgang Denk

Devkit8000: Adapt changes to ARM relocation support

Fix compilation of Devkit8000 after introduction of
ARM relocation support.
Signed-off-by: default avatarThomas Weber <weber@corscience.de>

Adapt to TEXT_BASE => CONFIG_SYS_TEXT_BASE rename.
Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
parent b7633517
#
# (C) Copyright 2006
# Texas Instruments, <www.ti.com>
#
# (C) Copyright 2009
# Frederik Kriewitz <frederik@kriewitz.eu>
#
# DevKit8000 uses OMAP3 (ARM-CortexA8) cpu
# see http://www.ti.com/ for more information on Texas Instruments
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
# Physical Address:
# 8000'0000 (bank0)
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
# For use with external or internal boots.
CONFIG_SYS_TEXT_BASE = 0x80e80000
......@@ -38,6 +38,8 @@
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
#define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */
#define CONFIG_SYS_TEXT_BASE 0x80008000
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
......@@ -306,4 +308,7 @@ extern unsigned int boot_flash_sec;
extern unsigned int boot_flash_type;
#endif
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment