Commit 69751729 authored by Vikas Manocha's avatar Vikas Manocha Committed by Tom Rini

serial: fdt: add device tree support for pl01x

This patch adds device tree support for arm pl010/pl011 driver.
Signed-off-by: default avatarVikas Manocha <vikas.manocha@st.com>
Acked-by: default avatarSimon Glass <sjg@chromium.org>
parent a69bdba9
* ARM AMBA Primecell PL011 & PL010 serial UART
Required properties:
- compatible: must be "arm,primecell", "arm,pl011" or "arm,pl010"
- reg: exactly one register range with length 0x1000
- clock: input clock frequency for the UART (used to calculate the baud
rate divisor)
......@@ -20,6 +20,9 @@
#include <dm/platform_data/serial_pl01x.h>
#include <linux/compiler.h>
#include "serial_pl01x_internal.h"
#include <fdtdec.h>
DECLARE_GLOBAL_DATA_PTR;
#ifndef CONFIG_DM_SERIAL
......@@ -28,7 +31,6 @@ static enum pl01x_type pl01x_type __attribute__ ((section(".data")));
static struct pl01x_regs *base_regs __attribute__ ((section(".data")));
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
DECLARE_GLOBAL_DATA_PTR;
#endif
static int pl01x_putc(struct pl01x_regs *regs, char c)
......@@ -351,9 +353,35 @@ static const struct dm_serial_ops pl01x_serial_ops = {
.setbrg = pl01x_serial_setbrg,
};
#ifdef CONFIG_OF_CONTROL
static const struct udevice_id pl01x_serial_id[] ={
{.compatible = "arm,pl011", .data = TYPE_PL011},
{.compatible = "arm,pl010", .data = TYPE_PL010},
{}
};
static int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
{
struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = addr;
plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "clock", 1);
plat->type = dev_get_driver_data(dev);
return 0;
}
#endif
U_BOOT_DRIVER(serial_pl01x) = {
.name = "serial_pl01x",
.id = UCLASS_SERIAL,
.of_match = of_match_ptr(pl01x_serial_id),
.ofdata_to_platdata = of_match_ptr(pl01x_serial_ofdata_to_platdata),
.platdata_auto_alloc_size = sizeof(struct pl01x_serial_platdata),
.probe = pl01x_serial_probe,
.ops = &pl01x_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment