Commit 6b9e309a authored by York Sun's avatar York Sun Committed by Tom Rini

Driver/ddr: Add support of different DDR base address

DDR base address has been the same from the view of core and DDR
controllers. This has changed for Freescale ARM-based SoCs. Controllers
setup DDR memory in a contiguous space and cores view it at separated
locations.
Signed-off-by: default avatarYork Sun <yorksun@freescale.com>
parent 4e5b1bd0
......@@ -492,6 +492,11 @@ The following options need to be configured:
CONFIG_SYS_FSL_DDR_LE
Defines the DDR controller register space as Little Endian
CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY
Physical address from the view of DDR controllers. It is the
same as CONFIG_SYS_DDR_SDRAM_BASE for all Power SoCs. But
it could be different for ARM SoCs.
- Intel Monahans options:
CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
......
......@@ -17,6 +17,18 @@
#include <fsl_ddr_sdram.h>
#include <fsl_ddr.h>
/*
* CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY is the physical address from the view
* of DDR controllers. It is the same as CONFIG_SYS_DDR_SDRAM_BASE for
* all Power SoCs. But it could be different for ARM SoCs. For example,
* fsl_lsch3 has a mapping mechanism to map DDR memory to ranges (in order) of
* 0x00_8000_0000 ~ 0x00_ffff_ffff
* 0x80_8000_0000 ~ 0xff_ffff_ffff
*/
#ifndef CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY CONFIG_SYS_DDR_SDRAM_BASE
#endif
#ifdef CONFIG_PPC
#include <asm/fsl_law.h>
......@@ -255,7 +267,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]);
}
current_mem_base = CONFIG_SYS_DDR_SDRAM_BASE;
current_mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
total_mem = 0;
if (pinfo->memctl_opts[0].memctl_interleaving) {
rank_density = pinfo->dimm_params[0][0].rank_density >>
......@@ -536,7 +548,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
}
total_mem = 1 + (((unsigned long long)max_end << 24ULL) |
0xFFFFFFULL) - CONFIG_SYS_DDR_SDRAM_BASE;
0xFFFFFFULL) - CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
}
return total_mem;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment