Commit 6de80f21 authored by Simon Glass's avatar Simon Glass

Drop references to MAKEALL in the documentation

It is confusing to mention MAKEALL when it is not the normal way of building
U-Boot anymore. Update the documentation to suit.
Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
Reviewed-by: default avatarTom Rini <trini@konsulko.com>
parent c8a3777c
......@@ -2756,7 +2756,7 @@ CBFS (Coreboot Filesystem) support
with a special header) as build targets. By defining
CONFIG_BUILD_TARGET in the SoC / board header, this
special image will be automatically built upon calling
make / MAKEALL.
make / buildman.
CONFIG_IDENT_STRING
......@@ -5083,33 +5083,10 @@ official or latest in the git repository) version of U-Boot sources.
But before you submit such a patch, please verify that your modifi-
cation did not break existing code. At least make sure that *ALL* of
the supported boards compile WITHOUT ANY compiler warnings. To do so,
just run the "MAKEALL" script, which will configure and build U-Boot
for ALL supported system. Be warned, this will take a while. You can
select which (cross) compiler to use by passing a `CROSS_COMPILE'
environment variable to the script, i. e. to use the ELDK cross tools
you can type
CROSS_COMPILE=ppc_8xx- MAKEALL
or to build on a native PowerPC system you can type
CROSS_COMPILE=' ' MAKEALL
When using the MAKEALL script, the default behaviour is to build
U-Boot in the source directory. This location can be changed by
setting the BUILD_DIR environment variable. Also, for each target
built, the MAKEALL script saves two log files (<target>.ERR and
<target>.MAKEALL) in the <source dir>/LOG directory. This default
location can be changed by setting the MAKEALL_LOGDIR environment
variable. For example:
export BUILD_DIR=/tmp/build
export MAKEALL_LOGDIR=/tmp/log
CROSS_COMPILE=ppc_8xx- MAKEALL
With the above settings build objects are saved in the /tmp/build,
log files are saved in the /tmp/log and the source tree remains clean
during the whole build process.
just run the buildman script (tools/buildman/buildman), which will
configure and build U-Boot for ALL supported system. Be warned, this
will take a while. Please see the buildman README, or run 'buildman -H'
for documentation.
See also "U-Boot Porting Guide" below.
......@@ -6565,7 +6542,7 @@ it:
Notes:
* Before sending the patch, run the MAKEALL script on your patched
* Before sending the patch, run the buildman script on your patched
source tree and make sure that no errors or warnings are reported
for any of the boards.
......
......@@ -31,9 +31,9 @@ loading the next image from a different media, etc).
Compilation
===========
run "./MAKEALL ipam390" in the u-boot source tree.
Once this build completes you will have a u-boot.ais file that needs to
be written to the nand flash.
run "tools/buildman/buildman -k ipam390" in the u-boot source tree.
Once this build completes you will have a ../current/ipam390/u-boot.ais file
that needs to be written to the nand flash.
Flashing the images to NAND
==========================
......@@ -71,13 +71,13 @@ here[1] to create an uboot-uart-ais.bin file
- cd to the u-boot source tree
- compile the u-boot for the ipam390 board:
$ ./MAKEALL ipam390
$ tools/buildman/buildman -k ipam390
-> Now we shall have u-boot.bin
- Create u-boot-uart-ais.bin
$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini
ipam390-ais-uart.cfg -o ./uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini ipam390-ais-uart.cfg \
-o ../current/ipam390/uboot-uart-ais.bin ./u-boot.bin@0xC1080000;
Note: The ipam390-ais-uart.cfg is found in the board directory
for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg
......
......@@ -51,7 +51,8 @@ c) now calculate the SHA1 sum from the memoryrange and write
Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
the correct SHA1 sum will be automagically included in the U-Boot image.
If you do a "buildman -k pcs440ep" or a "make all" to get the U-Boot image,
which will be found in ../current/ipam390/ - the correct SHA1 sum will be
automagically included in the U-Boot image.
Heiko Schocher, 11 Jul 2007
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment