Commit 6f279764 authored by Eddie Cai's avatar Eddie Cai Committed by Simon Glass

rockchip: rename miniarm to tinker board

Miniarm is the internal project code. Now it is officially named Tinker board.
So rename it.
Signed-off-by: 's avatarEddie Cai <eddie.cai@rock-chips.com>
Reviewed-by: 's avatarSimon Glass <sjg@chromium.org>
parent 1caec07e
......@@ -36,7 +36,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-rock2-square.dtb \
rk3288-evb.dtb \
rk3288-fennec.dtb \
rk3288-miniarm.dtb \
rk3288-tinker.dtb \
rk3288-popmetal.dtb \
rk3399-evb.dtb
dtb-$(CONFIG_ARCH_MESON) += \
......
......@@ -5,11 +5,11 @@
*/
/dts-v1/;
#include "rk3288-miniarm.dtsi"
#include "rk3288-tinker.dtsi"
/ {
model = "Miniarm-RK3288";
compatible = "rockchip,rk3288-miniarm", "rockchip,rk3288";
model = "Tinker-RK3288";
compatible = "rockchip,rk3288-tinker", "rockchip,rk3288";
chosen {
stdout-path = &uart2;
......
......@@ -60,7 +60,7 @@ int rk3288_qos_init(void)
writel(val, CPU_AXI_QOS_PRIORITY + VIO1_VOP_QOS);
if (!fdt_node_check_compatible(gd->fdt_blob, 0,
"rockchip,rk3288-miniarm"))
"rockchip,rk3288-tinker"))
{
/* set isp qos to higher priority */
writel(val, CPU_AXI_QOS_PRIORITY + VIO1_ISP_R_QOS);
......
......@@ -37,11 +37,11 @@ config TARGET_POPMETAL_RK3288
2GB DDR3. Expansion connectors provide access to I2C, SPI, UART,
GPIOs and display interface.
config TARGET_MINIARM_RK3288
bool "miniarm-RK3288"
select BOARD_LATE_INIT
config TARGET_TINKER_RK3288
bool "Tinker-RK3288"
select BOARD_LATE_INIT
help
Miniarm is a RK3288-based development board with 2 USB ports, HDMI,
Tinker is a RK3288-based development board with 2 USB ports, HDMI,
micro-SD card, audio, Gigabit Ethernet. It also includes on-board
8GB eMMC and 2GB of SDRAM. Expansion connectors provide access to
I2C, SPI, UART, GPIOs.
......@@ -124,6 +124,6 @@ source "board/rockchip/evb_rk3288/Kconfig"
source "board/rockchip/fennec_rk3288/Kconfig"
source "board/rockchip/miniarm_rk3288/Kconfig"
source "board/rockchip/tinker_rk3288/Kconfig"
endif
MINIARM-RK3288
M: Lin Huang <hl@rock-chips.com>
S: Maintained
F: board/rockchip/miniarm_rk3288
F: include/configs/miniarm_rk3288.h
F: configs/miniarm-rk3288_defconfig
if TARGET_MINIARM_RK3288
if TARGET_TINKER_RK3288
config SYS_BOARD
default "miniarm_rk3288"
default "tinker_rk3288"
config SYS_VENDOR
default "rockchip"
config SYS_CONFIG_NAME
default "miniarm_rk3288"
default "tinker_rk3288"
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
......
TINKER-RK3288
M: Lin Huang <hl@rock-chips.com>
S: Maintained
F: board/rockchip/tinker_rk3288
F: include/configs/tinker_rk3288.h
F: configs/tinker-rk3288_defconfig
......@@ -4,4 +4,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-y += miniarm-rk3288.o
obj-y += tinker-rk3288.o
......@@ -3,9 +3,9 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ROCKCHIP_RK3288=y
CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y
CONFIG_TARGET_MINIARM_RK3288=y
CONFIG_TARGET_TINKER_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEFAULT_DEVICE_TREE="rk3288-miniarm"
CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker"
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
......
......@@ -42,7 +42,7 @@ At present seven RK3288 boards are supported:
- Fennec RK3288 - use fennec-rk3288 configuration
- Firefly RK3288 - use firefly-rk3288 configuration
- Hisense Chromebook - use chromebook_jerry configuration
- Miniarm RK3288 - use miniarm-rk3288 configuration
- Tinker RK3288 - use tinker-rk3288 configuration
- PopMetal RK3288 - use popmetal-rk3288 configuration
- Radxa Rock 2 - use rock2 configuration
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment