Commit 71a988aa authored by Troy Kisky's avatar Troy Kisky Committed by Stefano Babic

imximage.cfg: run files through C preprocessor

The '#' used as comments in the files cause the preprocessor
trouble, so change to /* */.

The mkimage command which uses this preprocessor output
was moved to arch/arm/imx-common/Makefile

.gitignore was updated to ignore .cfgtmp files.
Signed-off-by: default avatarTroy Kisky <troy.kisky@boundarydevices.com>
parent 00239977
......@@ -15,6 +15,7 @@
*.swp
*.patch
*.bin
*.cfgtmp
# Build tree
/build-*
......
......@@ -467,9 +467,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.imx: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_IMX_CONFIG) -T imximage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend
$(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
......@@ -844,7 +843,8 @@ clean:
@$(MAKE) -s -C doc/DocBook/ cleandocs
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \
-o -name '*.cfgtmp' \) -print \
| xargs rm -f
# Removes everything not needed for testing u-boot
......
......@@ -34,6 +34,6 @@ PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
ifneq ($(CONFIG_IMX_CONFIG),)
ALL-y += $(obj)u-boot.imx
ALL-y += $(OBJTREE)/u-boot.imx
endif
......@@ -40,5 +40,5 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
ifneq ($(CONFIG_IMX_CONFIG),)
ALL-y += $(obj)u-boot.imx
ALL-y += $(OBJTREE)/u-boot.imx
endif
......@@ -42,6 +42,19 @@ all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
$(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp: $(OBJTREE)/%.cfgtmp : $(SRCTREE)/%
mkdir -p $(dir $@)
$(CC) -E -x c $< $(CPPFLAGS) -o $@
$(OBJTREE)/u-boot.imx: $(OBJTREE)/u-boot.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp
$(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
$(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONFIG_IMX_CONFIG)).cfgtmp
$(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
-e $(CONFIG_SPL_TEXT_BASE) -d $< $@
#########################################################################
# defines $(obj).depend target
......
#
# (C) Copyright 2012
# Stefano Babic DENX Software Engineering sbabic@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not write to the Free Software
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
# MA 02110-1301 USA
#
# Refer docs/README.imxmage for more details about how-to configure
# and create imximage boot image
#
# The syntax is taken as close as possible with the kwbimage
# image version
/*
* (C) Copyright 2012
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
# Boot Device : one of
# spi, sd (the board has no nand neither onenand)
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM nor
# Device Configuration Data (DCD)
#
# Each entry must have the format:
# Addr-type Address Value
#
# where:
# Addr-type register length (1,2 or 4 bytes)
# Address absolute address of the register
# value value to be stored in the register
# IOMUX for RAM only
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* IOMUX for RAM only */
DATA 4 0x53fa8554 0x300020
DATA 4 0x53fa8560 0x300020
DATA 4 0x53fa8594 0x300020
......@@ -72,37 +74,47 @@ DATA 4 0x53fa86fc 0x0
DATA 4 0x53fa86f4 0x0
DATA 4 0x53fa8714 0x0
DATA 4 0x53fa8724 0x4000000
#
# DDR RAM
/* DDR RAM */
DATA 4 0x63fd9088 0x40404040
DATA 4 0x63fd9090 0x40404040
DATA 4 0x63fd907C 0x01420143
DATA 4 0x63fd9080 0x01450146
DATA 4 0x63fd9018 0x00111740
DATA 4 0x63fd9000 0x84190000
# esdcfgX
/* esdcfgX */
DATA 4 0x63fd900C 0x9f5152e3
DATA 4 0x63fd9010 0xb68e8a63
DATA 4 0x63fd9014 0x01ff00db
# Read/Write command delay
/* Read/Write command delay */
DATA 4 0x63fd902c 0x000026d2
# Out of reset delays
/* Out of reset delays */
DATA 4 0x63fd9030 0x00ff0e21
# ESDCTL ODT timing control
/* ESDCTL ODT timing control */
DATA 4 0x63fd9008 0x12273030
# ESDCTL power down control
/* ESDCTL power down control */
DATA 4 0x63fd9004 0x0002002d
# Set registers in DDR memory chips
/* Set registers in DDR memory chips */
DATA 4 0x63fd901c 0x00008032
DATA 4 0x63fd901c 0x00008033
DATA 4 0x63fd901c 0x00028031
DATA 4 0x63fd901c 0x052080b0
DATA 4 0x63fd901c 0x04008040
# ESDCTL refresh control
/* ESDCTL refresh control */
DATA 4 0x63fd9020 0x00005800
# PHY ZQ HW control
/* PHY ZQ HW control */
DATA 4 0x63fd9040 0x05380003
# PHY ODT control
/* PHY ODT control */
DATA 4 0x63fd9058 0x00022222
# start DDR3
/* start DDR3 */
DATA 4 0x63fd901c 0x00000000
# Copyright (C) 2011 Freescale Semiconductor, Inc.
# Jason Liu <r64343@freescale.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not write to the Free Software
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
# MA 02110-1301 USA
#
# Refer docs/README.imxmage for more details about how-to configure
# and create imximage boot image
#
# The syntax is taken as close as possible with the kwbimage
# image version
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
* Jason Liu <r64343@freescale.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
# Boot Device : one of
# spi, sd (the board has no nand neither onenand)
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
# Device Configuration Data (DCD)
#
# Each entry must have the format:
# Addr-type Address Value
#
# where:
# Addr-type register length (1,2 or 4 bytes)
# Address absolute address of the register
# value value to be stored in the register
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x020e05a8 0x00000030
DATA 4 0x020e05b0 0x00000030
DATA 4 0x020e0524 0x00000030
......@@ -154,7 +158,7 @@ DATA 4 0x021b48b8 0x00000800
DATA 4 0x021b001c 0x00000000
DATA 4 0x021b0404 0x00011006
# set the default clock gate to save power
/* set the default clock gate to save power */
DATA 4 0x020c4068 0x00C03F3F
DATA 4 0x020c406c 0x0030FC03
DATA 4 0x020c4070 0x0FFFC000
......@@ -163,8 +167,8 @@ DATA 4 0x020c4078 0x00FFF300
DATA 4 0x020c407c 0x0F0000C3
DATA 4 0x020c4080 0x000003FF
# enable AXI cache for VDOA/VPU/IPU
/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF
# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F
#
# (C) Copyright 2009
# Stefano Babic DENX Software Engineering sbabic@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# Refer docs/README.imxmage for more details about how-to configure
# and create imximage boot image
#
# The syntax is taken as close as possible with the kwbimage
# Boot Device : one of
# spi, sd (the board has no nand neither onenand)
/*
* (C) Copyright 2009
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
# Device Configuration Data (DCD)
#
# Each entry must have the format:
# Addr-type Address Value
#
# where:
# Addr-type register length (1,2 or 4 bytes)
# Address absolute address of the register
# value value to be stored in the register
# EIM config-CS5 init -- CPLD
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* EIM config-CS5 init -- CPLD */
DATA 4 0xB8002050 0x0000D843
DATA 4 0xB8002054 0x22252521
DATA 4 0xB8002058 0x22220A00
# DDR2 init
/* DDR2 init */
DATA 4 0xB8001004 0x0076E83A
DATA 4 0xB8001010 0x00000204
DATA 4 0xB8001000 0x92210000
......@@ -67,7 +70,7 @@ DATA 4 0x43FAC454 0x00001000
DATA 4 0x53F80008 0x20034000
# Enable the clocks
/* Enable the clocks */
DATA 4 0x53f8000c 0x1fffffff
DATA 4 0x53f80010 0xffffffff
DATA 4 0x53f80014 0xfdfff
#
# (C Copyright 2009
# Stefano Babic DENX Software Engineering sbabic@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not write to the Free Software
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
# MA 02110-1301 USA
#
# Refer docs/README.imxmage for more details about how-to configure
# and create imximage boot image
#
# The syntax is taken as close as possible with the kwbimage
# Boot Device : one of
# spi, sd (the board has no nand neither onenand)
/*
* (C Copyright 2009
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM spi
# Device Configuration Data (DCD)
#
# Each entry must have the format:
# Addr-type Address Value
#
# where:
# Addr-type register length (1,2 or 4 bytes)
# Address absolute address of the register
# value value to be stored in the register
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
# Setting IOMUXC
/* Setting IOMUXC */
DATA 4 0x73FA88a0 0x200
DATA 4 0x73FA850c 0x20c5
DATA 4 0x73FA8510 0x20c5
......@@ -65,22 +69,24 @@ DATA 4 0x73FA88a4 0x6
DATA 4 0x73FA88ac 0x6
DATA 4 0x73FA88b8 0x6
# Setting DDR for micron
# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
# CAS=3 BL=4
# ESDCTL_ESDCTL0
/*
* Setting DDR for micron
* 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
* CAS=3 BL=4
*/
/* ESDCTL_ESDCTL0 */
DATA 4 0x83FD9000 0x82a20000
# ESDCTL_ESDCTL1
/* ESDCTL_ESDCTL1 */
DATA 4 0x83FD9008 0x82a20000
# ESDCTL_ESDMISC
/* ESDCTL_ESDMISC */
DATA 4 0x83FD9010 0x000ad0d0
# ESDCTL_ESDCFG0
/* ESDCTL_ESDCFG0 */
DATA 4 0x83FD9004 0x333574aa
# ESDCTL_ESDCFG1
/* ESDCTL_ESDCFG1 */
DATA 4 0x83FD900C 0x333574aa
# Init DRAM on CS0
# ESDCTL_ESDSCR
/* Init DRAM on CS0 */
/* ESDCTL_ESDSCR */
DATA 4 0x83FD9014 0x04008008
DATA 4 0x83FD9014 0x0000801a
DATA 4 0x83FD9014 0x0000801b
......@@ -94,7 +100,7 @@ DATA 4 0x83FD9014 0x03808019
DATA 4 0x83FD9014 0x00408019
DATA 4 0x83FD9014 0x00008000
# Init DRAM on CS1
/* Init DRAM on CS1 */
DATA 4 0x83FD9014 0x0400800c
DATA 4 0x83FD9014 0x0000801e
DATA 4 0x83FD9014 0x0000801f
......@@ -108,12 +114,12 @@ DATA 4 0x83FD9014 0x0380801d
DATA 4 0x83FD9014 0x0040801d
DATA 4 0x83FD9014 0x00008004
# Write to CTL0
/* Write to CTL0 */
DATA 4 0x83FD9000 0xb2a20000
# Write to CTL1
/* Write to CTL1 */
DATA 4 0x83FD9008 0xb2a20000
# ESDMISC
/* ESDMISC */
DATA 4 0x83FD9010 0x000ad6d0
#ESDCTL_ESDCDLYGD
/* ESDCTL_ESDCDLYGD */
DATA 4 0x83FD9034 0x90000000
DATA 4 0x83FD9014 0x00000000
#
# (C) Copyright 2009
# Stefano Babic DENX Software Engineering sbabic@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not write to the Free Software
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
# MA 02110-1301 USA
#
# Refer docs/README.imxmage for more details about how-to configure
# and create imximage boot image
#
# The syntax is taken as close as possible with the kwbimage
# image version
/*
* (C) Copyright 2009
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
# Boot Device : one of
# spi, sd (the board has no nand neither onenand)
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
# Device Configuration Data (DCD)
#
# Each entry must have the format:
# Addr-type Address Value
#
# where:
# Addr-type register length (1,2 or 4 bytes)
# Address absolute address of the register
# value value to be stored in the register
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
DATA 4 0x53fa8554 0x00300000
DATA 4 0x53fa8558 0x00300040
DATA 4 0x53fa8560 0x00300000
......
#
# (C Copyright 2009
# Stefano Babic DENX Software Engineering sbabic@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not write to the Free Software
# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
# MA 02110-1301 USA
#
# Refer docs/README.imxmage for more details about how-to configure
# and create imximage boot image
#
# The syntax is taken as close as possible with the kwbimage
# image version
/*
* (C Copyright 2009
* Stefano Babic DENX Software Engineering sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not write to the Free Software
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
* Refer docs/README.imxmage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
*/
/* image version */
IMAGE_VERSION 2
# Boot Device : one of
# spi, sd (the board has no nand neither onenand)
/*
* Boot Device : one of
* spi, sd (the board has no nand neither onenand)
*/
BOOT_FROM sd
# Device Configuration Data (DCD)
#
# Each entry must have the format:
# Addr-type Address Value
#
# where:
# Addr-type register length (1,2 or 4 bytes)
# Address absolute address of the register
# value value to be stored in the register
# Setting IOMUXC
/*
* Device Configuration Data (DCD)
*
* Each entry must have the format:
* Addr-type Address Value
*
* where:
* Addr-type register length (1,2 or 4 bytes)
* Address absolute address of the register
* value value to be stored in the register
*/
/* Setting IOMUXC */
DATA 4 0x53fa8554 0x00200000
DATA 4 0x53fa8560 0x00200000
DATA 4 0x53fa8594 0x00200000
......
# Copyright (C) 2011 Freescale Semiconductor, Inc.
# Jason Liu <r64343@freescale.com>