Commit 77cd89e7 authored by pekon gupta's avatar pekon gupta Committed by Tom Rini

ARM: omap: fix GPMC address-map size for NAND and NOR devices

Fixes commit a0a37183
    ARM: omap: merge GPMC initialization code for all platform

1) NAND device are not directly memory-mapped to CPU address-space, they are
 indirectly accessed via following GPMC registers:
 - GPMC_NAND_COMMAND_x
 - GPMC_NAND_ADDRESS_x
 - GPMC_NAND_DATA_x
 Therefore from CPU's point of view, NAND address-map can be limited to just
 above register addresses. But GPMC chip-select address-map can be configured
 in granularity of 16MB only.
 So this patch uses GPMC_SIZE_16M for all NAND devices.

2) NOR device are directly memory-mapped to CPU address-space, so its
 address-map size depends on actual addressable region in NOR FLASH device.
 So this patch uses CONFIG_SYS_FLASH_SIZE to derive GPMC chip-select address-map
 size configuration.
Signed-off-by: 's avatarPekon Gupta <pekon@ti.com>
parent 8c16dd6f
......@@ -87,8 +87,12 @@ void gpmc_init(void)
STNOR_GPMC_CONFIG6,
STNOR_GPMC_CONFIG7
};
u32 size = GPMC_SIZE_16M;
u32 base = CONFIG_SYS_FLASH_BASE;
u32 size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M :
/* > 64MB */ ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M :
/* > 32MB */ ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M :
/* > 16MB */ ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M :
/* min 16MB */ GPMC_SIZE_16M)));
#elif defined(CONFIG_NAND) || defined(CONFIG_CMD_NAND)
/* configure GPMC for NAND */
const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1,
......@@ -99,8 +103,9 @@ void gpmc_init(void)
M_NAND_GPMC_CONFIG6,
0
};
u32 size = GPMC_SIZE_256M;
u32 base = CONFIG_SYS_NAND_BASE;
u32 size = GPMC_SIZE_16M;
#elif defined(CONFIG_CMD_ONENAND)
const u32 gpmc_regs[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG1,
ONENAND_GPMC_CONFIG2,
......
......@@ -453,6 +453,7 @@
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BASE (0x08000000)
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_SIZE 0x01000000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
/* Reduce SPL size by removing unlikey targets */
#ifdef CONFIG_NOR_BOOT
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment