Commit 79788bb1 authored by Ajay Bhargav's avatar Ajay Bhargav Committed by Albert ARIBAUD

net: Adds Fast Ethernet Controller driver for Armada100

This patch adds support for Fast Ethernet Controller driver for
Armada100 series.
Signed-off-by: default avatarAjay Bhargav <ajay.bhargav@einfochips.com>
Signed-off-by: default avatarPrafulla Wadaskar <prafulla@marvell.com>
parent ea3cd47a
......@@ -43,6 +43,7 @@
/* Register Base Addresses */
#define ARMD1_DRAM_BASE 0xB0000000
#define ARMD1_FEC_BASE 0xC0800000
#define ARMD1_TIMER_BASE 0xD4014000
#define ARMD1_APBC1_BASE 0xD4015000
#define ARMD1_APBC2_BASE 0xD4015800
......
......@@ -28,6 +28,7 @@ LIB := $(obj)libnet.o
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
COBJS-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o
......
This diff is collapsed.
/*
* (C) Copyright 2011
* eInfochips Ltd. <www.einfochips.com>
* Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
*
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#ifndef __ARMADA100_FEC_H__
#define __ARMADA100_FEC_H__
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#define PORT_NUM 0x0
/* RX & TX descriptor command */
#define BUF_OWNED_BY_DMA (1<<31)
/* RX descriptor status */
#define RX_EN_INT (1<<23)
#define RX_FIRST_DESC (1<<17)
#define RX_LAST_DESC (1<<16)
#define RX_ERROR (1<<15)
/* TX descriptor command */
#define TX_EN_INT (1<<23)
#define TX_GEN_CRC (1<<22)
#define TX_ZERO_PADDING (1<<18)
#define TX_FIRST_DESC (1<<17)
#define TX_LAST_DESC (1<<16)
#define TX_ERROR (1<<15)
/* smi register */
#define SMI_BUSY (1<<28) /* 0 - Write, 1 - Read */
#define SMI_R_VALID (1<<27) /* 0 - Write, 1 - Read */
#define SMI_OP_W (0<<26) /* Write operation */
#define SMI_OP_R (1<<26) /* Read operation */
#define HASH_ADD 0
#define HASH_DELETE 1
#define HASH_ADDR_TABLE_SIZE 0x4000 /* 16K (1/2K address - PCR_HS == 1) */
#define HOP_NUMBER 12
#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
#define PHY_WAIT_MICRO_SECONDS 10
#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
#define ETH_EXTRA_HEADER (6+6+2+4)
/* dest+src addr+protocol id+crc */
#define MAX_PKT_SIZE 1536
/* Bit definitions of the SDMA Config Reg */
#define SDCR_BSZ_OFF 12
#define SDCR_BSZ8 (3<<SDCR_BSZ_OFF)
#define SDCR_BSZ4 (2<<SDCR_BSZ_OFF)
#define SDCR_BSZ2 (1<<SDCR_BSZ_OFF)
#define SDCR_BSZ1 (0<<SDCR_BSZ_OFF)
#define SDCR_BLMR (1<<6)
#define SDCR_BLMT (1<<7)
#define SDCR_RIFB (1<<9)
#define SDCR_RC_OFF 2
#define SDCR_RC_MAX_RETRANS (0xf << SDCR_RC_OFF)
/* SDMA_CMD */
#define SDMA_CMD_AT (1<<31)
#define SDMA_CMD_TXDL (1<<24)
#define SDMA_CMD_TXDH (1<<23)
#define SDMA_CMD_AR (1<<15)
#define SDMA_CMD_ERD (1<<7)
/* Bit definitions of the Port Config Reg */
#define PCR_HS (1<<12)
#define PCR_EN (1<<7)
#define PCR_PM (1<<0)
/* Bit definitions of the Port Config Extend Reg */
#define PCXR_2BSM (1<<28)
#define PCXR_DSCP_EN (1<<21)
#define PCXR_MFL_1518 (0<<14)
#define PCXR_MFL_1536 (1<<14)
#define PCXR_MFL_2048 (2<<14)
#define PCXR_MFL_64K (3<<14)
#define PCXR_FLP (1<<11)
#define PCXR_PRIO_TX_OFF 3
#define PCXR_TX_HIGH_PRI (7<<PCXR_PRIO_TX_OFF)
/*
* * Bit definitions of the Interrupt Cause Reg
* * and Interrupt MASK Reg is the same
* */
#define ICR_RXBUF (1<<0)
#define ICR_TXBUF_H (1<<2)
#define ICR_TXBUF_L (1<<3)
#define ICR_TXEND_H (1<<6)
#define ICR_TXEND_L (1<<7)
#define ICR_RXERR (1<<8)
#define ICR_TXERR_H (1<<10)
#define ICR_TXERR_L (1<<11)
#define ICR_TX_UDR (1<<13)
#define ICR_MII_CH (1<<28)
#define ALL_INTS (ICR_TXBUF_H | ICR_TXBUF_L | ICR_TX_UDR |\
ICR_TXERR_H | ICR_TXERR_L |\
ICR_TXEND_H | ICR_TXEND_L |\
ICR_RXBUF | ICR_RXERR | ICR_MII_CH)
#define PHY_MASK 0x0000001f
#define to_darmdfec(_kd) container_of(_kd, struct armdfec_device, dev)
/* Size of a Tx/Rx descriptor used in chain list data structure */
#define ARMDFEC_RXQ_DESC_ALIGNED_SIZE \
(((sizeof(struct rx_desc) / PKTALIGN) + 1) * PKTALIGN)
#define RX_BUF_OFFSET 0x2
#define RXQ 0x0 /* RX Queue 0 */
#define TXQ 0x1 /* TX Queue 1 */
struct addr_table_entry_t {
u32 lo;
u32 hi;
};
/* Bit fields of a Hash Table Entry */
enum hash_table_entry {
HTEVALID = 1,
HTESKIP = 2,
HTERD = 4,
HTERDBIT = 2
};
struct tx_desc {
u32 cmd_sts; /* Command/status field */
u16 reserved;
u16 byte_cnt; /* buffer byte count */
u8 *buf_ptr; /* pointer to buffer for this descriptor */
struct tx_desc *nextdesc_p; /* Pointer to next descriptor */
};
struct rx_desc {
u32 cmd_sts; /* Descriptor command status */
u16 byte_cnt; /* Descriptor buffer byte count */
u16 buf_size; /* Buffer size */
u8 *buf_ptr; /* Descriptor buffer pointer */
struct rx_desc *nxtdesc_p; /* Next descriptor pointer */
};
/*
* Armada100 Fast Ethernet controller Registers
* Refer Datasheet Appendix A.22
*/
struct armdfec_reg {
u32 phyadr; /* PHY Address */
u32 pad1[3];
u32 smi; /* SMI */
u32 pad2[0xFB];
u32 pconf; /* Port configuration */
u32 pad3;
u32 pconf_ext; /* Port configuration extend */
u32 pad4;
u32 pcmd; /* Port Command */
u32 pad5;
u32 pstatus; /* Port Status */
u32 pad6;
u32 spar; /* Serial Parameters */
u32 pad7;
u32 htpr; /* Hash table pointer */
u32 pad8;
u32 fcsal; /* Flow control source address low */
u32 pad9;
u32 fcsah; /* Flow control source address high */
u32 pad10;
u32 sdma_conf; /* SDMA configuration */
u32 pad11;
u32 sdma_cmd; /* SDMA command */
u32 pad12;
u32 ic; /* Interrupt cause */
u32 iwc; /* Interrupt write to clear */
u32 im; /* Interrupt mask */
u32 pad13;
u32 *eth_idscpp[4]; /* Eth0 IP Differentiated Services Code
Point to Priority 0 Low */
u32 eth_vlan_p; /* Eth0 VLAN Priority Tag to Priority */
u32 pad14[3];
struct rx_desc *rxfdp[4]; /* Ethernet First Rx Descriptor
Pointer */
u32 pad15[4];
struct rx_desc *rxcdp[4]; /* Ethernet Current Rx Descriptor
Pointer */
u32 pad16[0x0C];
struct tx_desc *txcdp[2]; /* Ethernet Current Tx Descriptor
Pointer */
};
struct armdfec_device {
struct eth_device dev;
struct armdfec_reg *regs;
struct tx_desc *p_txdesc;
struct rx_desc *p_rxdesc;
struct rx_desc *p_rxdesc_curr;
u8 *p_rxbuf;
u8 *p_aligned_txbuf;
u8 *htpr; /* hash pointer */
};
#endif /* __ARMADA100_FEC_H__ */
......@@ -94,6 +94,7 @@ int smc911x_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int armada100_fec_register(unsigned long base_addr);
int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
/* Boards with PCI network controllers can call this from their board_eth_init()
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment