Commit 79a34b71 authored by Tom Rini's avatar Tom Rini
parents a8523a80 76866600
......@@ -390,6 +390,7 @@ config ARCH_B4860
select SYS_FSL_ERRATUM_A007075
select SYS_FSL_ERRATUM_A007186
select SYS_FSL_ERRATUM_A007212
select SYS_FSL_ERRATUM_A007907
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
......@@ -855,6 +856,8 @@ config ARCH_T2080
select SYS_FSL_ERRATUM_A006593
select SYS_FSL_ERRATUM_A007186
select SYS_FSL_ERRATUM_A007212
select SYS_FSL_ERRATUM_A007815
select SYS_FSL_ERRATUM_A007907
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_ESDHC111
select SYS_FSL_HAS_DDR3
......@@ -916,6 +919,8 @@ config ARCH_T4240
select SYS_FSL_ERRATUM_A006593
select SYS_FSL_ERRATUM_A007186
select SYS_FSL_ERRATUM_A007798
select SYS_FSL_ERRATUM_A007815
select SYS_FSL_ERRATUM_A007907
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_HAS_DDR3
select SYS_FSL_HAS_SEC
......@@ -1103,9 +1108,15 @@ config SYS_FSL_ERRATUM_A007186
config SYS_FSL_ERRATUM_A007212
bool
config SYS_FSL_ERRATUM_A007815
bool
config SYS_FSL_ERRATUM_A007798
bool
config SYS_FSL_ERRATUM_A007907
bool
config SYS_FSL_ERRATUM_A008044
bool
......
......@@ -330,6 +330,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A009663
puts("Work-around for Erratum A009663 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007907
puts("Work-around for Erratum A007907 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007815
puts("Work-around for Erratum A007815 enabled\n");
#endif
return 0;
}
......
......@@ -777,6 +777,13 @@ int cpu_init_r(void)
sync();
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007907
flush_dcache();
mtspr(L1CSR2, (mfspr(L1CSR2) & ~L1CSR2_DCSTASHID));
sync();
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
/*
* A-005812 workaround sets bit 32 of SPR 976 for SoCs running
......
......@@ -79,7 +79,9 @@ typedef struct ccsr_pci {
u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */
u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */
u32 pm_command; /* 0x02c - PCIE PM Command register */
char res4[3016]; /* (- #xbf8 #x30)3016 */
char res3[2188]; /* (0x8bc - 0x30 = 2188) */
u32 dbi_ro_wr_en; /* 0x8bc - DBI read only write enable reg */
char res4[824]; /* (0xbf8 - 0x8c0 = 824) */
u32 block_rev1; /* 0xbf8 - PCIE Block Revision register 1 */
u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */
......
......@@ -501,6 +501,7 @@
#define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */
#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */
#define L1CSR2_DCWS 0x40000000 /* Data Cache Write Shadow */
#define L1CSR2_DCSTASHID 0x000003ff /* Data Cache Stash ID */
#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
......
......@@ -65,7 +65,7 @@ ppcSync:
* flush_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(flush_dcache_range)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC86xx)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
......@@ -89,7 +89,7 @@ _GLOBAL(flush_dcache_range)
* invalidate_dcache_range(unsigned long start, unsigned long stop)
*/
_GLOBAL(invalidate_dcache_range)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC86xx)
#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
li r5,L1_CACHE_BYTES-1
andc r3,r3,r5
subf r4,r3,r4
......
......@@ -543,6 +543,13 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
}
#ifdef CONFIG_SYS_FSL_ERRATUM_A007815
/* The Read-Only Write Enable bit defaults to 1 instead of 0.
* Set to 0 to protect the read-only registers.
*/
clrbits_be32(&pci->dbi_ro_wr_en, 0x01);
#endif
/* Use generic setup_device to initialize standard pci regs,
* but do not allocate any windows since any BAR found (such
* as PCSRBAR) is not in this cpu's memory space.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment