Commit 7ca3f9c5 authored by Aneesh V's avatar Aneesh V Committed by Sandeep Paulraj

ARMV7: OMAP4: Calculate SDRAM size

Calculate the SDRAM size from DMM configuration registers instead of using
hard-coded values. This gives correct values for all different boards.

It's assumed that DMM sections do not overlap memory areas.
Signed-off-by: default avatarAneesh V <aneesh@ti.com>
Tested-by: default avatarSteve Sakoman <steve@sakoman.com>
Signed-off-by: default avatarSandeep Paulraj <s-paulraj@ti.com>
parent c1244e85
......@@ -30,6 +30,7 @@
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
/*
* Routine: s_init
......@@ -66,6 +67,33 @@ void watchdog_init(void)
writel(WD_UNLOCK2, &wd2_base->wspr);
}
/*
* This function finds the SDRAM size available in the system
* based on DMM section configurations
* This is needed because the size of memory installed may be
* different on different versions of the board
*/
u32 sdram_size(void)
{
u32 section, i, total_size = 0, size, addr;
for (i = 0; i < 4; i++) {
section = __raw_readl(DMM_LISA_MAP_BASE + i*4);
addr = section & DMM_LISA_MAP_SYS_ADDR_MASK;
/* See if the address is valid */
if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
(addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
size = ((section & DMM_LISA_MAP_SYS_SIZE_MASK) >>
DMM_LISA_MAP_SYS_SIZE_SHIFT);
size = 1 << size;
size *= SZ_16M;
total_size += size;
}
}
return total_size;
}
/*
* Routine: dram_init
* Description: sets uboots idea of sdram size
......@@ -75,7 +103,7 @@ int dram_init(void)
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = 0x80000000;
gd->bd->bi_dram[0].size = 512 << 20;
gd->bd->bi_dram[0].size = sdram_size();
return 0;
}
......
......@@ -42,6 +42,10 @@
#define OMAP44XX_L4_WKUP_BASE 0x4A300000
#define OMAP44XX_L4_PER_BASE 0x48000000
#define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000
#define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000
/* CONTROL */
#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
......@@ -66,6 +70,12 @@
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
/* DMM */
#define OMAP44XX_DMM_BASE 0x4E000000
#define DMM_LISA_MAP_BASE (OMAP44XX_DMM_BASE + 0x40)
#define DMM_LISA_MAP_SYS_SIZE_MASK (7 << 20)
#define DMM_LISA_MAP_SYS_SIZE_SHIFT 20
#define DMM_LISA_MAP_SYS_ADDR_MASK (0xFF << 24)
/*
* Hardware Register Details
*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment