Commit 7cf7beff authored by Łukasz Majewski's avatar Łukasz Majewski Committed by Marek Vasut

usb:udc:samsung:fix Remove the req_config flag

The dev->req_config flag was indicating that the forwarded
request needs to perform the usb gadget delayed status.
This is however not needed anymore, so it can be removed.
Signed-off-by: default avatarLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Vasut <marex@denx.de>
parent f50dcd60
......@@ -1316,7 +1316,7 @@ void s3c_ep0_setup(struct s3c_udc *dev)
/* cope with automagic for some standard requests. */
dev->req_std = (usb_ctrl->bRequestType & USB_TYPE_MASK)
== USB_TYPE_STANDARD;
dev->req_config = 0;
dev->req_pending = 1;
/* Handle some SETUP packets ourselves */
......@@ -1337,10 +1337,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
DEBUG_SETUP("%s: USB_REQ_SET_CONFIGURATION (%d)\n",
__func__, usb_ctrl->wValue);
if (usb_ctrl->bRequestType == USB_RECIP_DEVICE) {
if (usb_ctrl->bRequestType == USB_RECIP_DEVICE)
reset_available = 1;
dev->req_config = 1;
}
break;
case USB_REQ_GET_DESCRIPTOR:
......@@ -1352,10 +1351,9 @@ void s3c_ep0_setup(struct s3c_udc *dev)
DEBUG_SETUP("%s: *** USB_REQ_SET_INTERFACE (%d)\n",
__func__, usb_ctrl->wValue);
if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE) {
if (usb_ctrl->bRequestType == USB_RECIP_INTERFACE)
reset_available = 1;
dev->req_config = 1;
}
break;
case USB_REQ_GET_CONFIGURATION:
......@@ -1404,12 +1402,6 @@ void s3c_ep0_setup(struct s3c_udc *dev)
spin_lock(&dev->lock);
if (i < 0) {
if (dev->req_config) {
DEBUG_SETUP("\tconfig change 0x%02x fail %d?\n",
(u32)usb_ctrl->bRequest, i);
return;
}
/* setup processing failed, force stall */
s3c_udc_ep0_set_stall(ep);
dev->ep0state = WAIT_FOR_SETUP;
......
......@@ -102,7 +102,7 @@ struct s3c_udc {
unsigned char usb_address;
unsigned req_pending:1, req_std:1, req_config:1;
unsigned req_pending:1, req_std:1;
};
extern struct s3c_udc *the_controller;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment