Commit 7d1a3a67 authored by Masahiro Yamada's avatar Masahiro Yamada

ARM: UniPhier: move UART pin settings to SPL

The UniPhier platform is going to enable Driver Model and UART
support on SPL.  Move UART pin settings to early_pin_init(),
which is called from SPL.
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
parent 94ab98bb
......@@ -5,7 +5,7 @@
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \
pll_spectrum.o umc_init.o ddrphy_init.o
early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o
obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
obj-$(CONFIG_SPL_DM) += platdevice.o
......
/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <mach/sg-regs.h>
void early_pin_init(void)
{
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_UNIPHIER_SERIAL
sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */
sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */
sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */
sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */
sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */
sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */
sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
#endif
}
/*
* Copyright (C) 2011-2014 Panasonic Corporation
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <mach/sg-regs.h>
......@@ -14,20 +14,6 @@ void pin_init(void)
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_UNIPHIER_SERIAL
sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */
sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */
sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */
sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */
sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */
sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */
sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
#endif
#ifdef CONFIG_NAND_DENALI
sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */
sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */
......
......@@ -5,7 +5,7 @@
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
obj-y += sg_init.o pll_init.o early_clkrst_init.o \
pll_spectrum.o umc_init.o ddrphy_init.o
early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o
obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
obj-$(CONFIG_SPL_DM) += platdevice.o
......
/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/io.h>
#include <mach/sg-regs.h>
void early_pin_init(void)
{
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_UNIPHIER_SERIAL
sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */
sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */
sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */
sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */
sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */
sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */
sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */
sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */
#endif
writel(1, SG_LOADPINCTRL);
}
/*
* Copyright (C) 2011-2014 Panasonic Corporation
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <mach/sg-regs.h>
......@@ -12,17 +12,6 @@ void pin_init(void)
{
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_UNIPHIER_SERIAL
sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */
sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */
sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */
sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */
sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */
sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */
sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */
sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */
#endif
#ifdef CONFIG_NAND_DENALI
sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */
sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */
......
/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <mach/sg-regs.h>
void early_pin_init(void)
{
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_UNIPHIER_SERIAL
sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */
sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */
sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */
sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */
sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */
sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */
sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
#endif
}
/*
* Copyright (C) 2011-2014 Panasonic Corporation
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015 Socionext Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <mach/sg-regs.h>
......@@ -12,20 +12,6 @@ void pin_init(void)
{
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_UNIPHIER_SERIAL
sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */
sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */
sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */
sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */
sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */
sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */
sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */
sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
#endif
#ifdef CONFIG_SYS_I2C_UNIPHIER
{
u32 tmp;
......
......@@ -20,6 +20,7 @@ void pll_init(void);
void pin_init(void);
void memconf_init(void);
void early_clkrst_init(void);
void early_pin_init(void);
int umc_init(void);
void enable_dpll_ssc(void);
......@@ -47,6 +48,10 @@ void spl_board_init(void)
led_write(L, 2, , );
early_pin_init();
led_write(L, 3, , );
{
int res;
......@@ -56,9 +61,9 @@ void spl_board_init(void)
;
}
}
led_write(L, 3, , );
led_write(L, 4, , );
enable_dpll_ssc();
led_write(L, 4, , );
led_write(L, 5, , );
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment