Commit 823b2c4c authored by Egli, Samuel's avatar Egli, Samuel Committed by Tom Rini

siemens: update DDR3 parameters for dxr2

* add parameters for factory and print them at start up to
   facilitate control of right DDR3 settings in EEPROM.

 * cosmetic changes in a couple of printfs
Signed-off-by: default avatarSamuel Egli <samuel.egli@siemens.com>
Cc: Roger Meier <r.meier@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
parent 9fc2ed40
......@@ -38,12 +38,26 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
static struct dxr2_baseboard_id __attribute__((section(".data"))) settings;
/* @303MHz-i0 */
#if DDR_PLL_FREQ == 303
/* Default@303MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
0x0000093B, 0x0000014A,
"default name @303MHz \0",
"default marking \0",
};
#elif DDR_PLL_FREQ == 400
/* Default@400MHz-i0 */
const struct ddr3_data ddr3_default = {
0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4,
0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab,
0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232,
0x00000618, 0x0000014A,
"default name @400MHz \0",
"default marking \0",
};
#endif
static void set_default_ddr3_timings(void)
{
......@@ -53,8 +67,12 @@ static void set_default_ddr3_timings(void)
static void print_ddr3_timings(void)
{
printf("\n\nDDR3 Timing parameters:\n");
printf("Diff Eeprom Default\n");
printf("\nDDR3\n");
printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
printf("device:\t\t%s\n", settings.ddr3.manu_name);
printf("marking:\t%s\n", settings.ddr3.manu_marking);
printf("timing parameters\n");
printf("diff\teeprom\tdefault\n");
PRINTARGS(magic);
PRINTARGS(version);
PRINTARGS(ddr3_sratio);
......@@ -78,9 +96,9 @@ static void print_ddr3_timings(void)
static void print_chip_data(void)
{
printf("\n");
printf("Device: '%s'\n", settings.chip.sdevname);
printf("HW version: '%s'\n", settings.chip.shwver);
printf("\nCPU BOARD\n");
printf("device: \t'%s'\n", settings.chip.sdevname);
printf("hw version: \t'%s'\n", settings.chip.shwver);
}
#endif /* CONFIG_SPL_BUILD */
......@@ -112,19 +130,18 @@ static int read_eeprom(void)
printf("Using DDR3 settings from EEPROM\n");
} else {
if (ddr3_default.magic != settings.ddr3.magic)
printf("Error: No valid DDR3 data in eeprom.\n");
printf("Warning: No valid DDR3 data in eeprom.\n");
if (ddr3_default.version != settings.ddr3.version)
printf("Error: DDR3 data version does not match.\n");
printf("Warning: DDR3 data version does not match.\n");
printf("Using default settings\n");
set_default_ddr3_timings();
}
if (MAGIC_CHIP == settings.chip.magic) {
printf("Valid chip data in eeprom\n");
print_chip_data();
} else {
printf("Error: No chip data in eeprom\n");
printf("Warning: No chip data in eeprom\n");
}
print_ddr3_timings();
......
......@@ -22,24 +22,26 @@
#define MAGIC_CHIP 0x50494843
/* Automatic generated definition */
/* Wed, 18 Sep 2013 18:58:27 +0200 */
/* From file: draco/ddr3-data-micron-v2.txt */
/* Wed, 16 Apr 2014 16:50:41 +0200 */
/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
struct ddr3_data {
unsigned int magic; /* 0x33524444 */
unsigned int version; /* 0x56312e34 */
unsigned short int ddr3_sratio; /* 0x0100 */
unsigned short int iclkout; /* 0x0001 */
unsigned int version; /* 0x56312e35 */
unsigned short int ddr3_sratio; /* 0x0080 */
unsigned short int iclkout; /* 0x0000 */
unsigned short int dt0rdsratio0; /* 0x003A */
unsigned short int dt0wdsratio0; /* 0x008A */
unsigned short int dt0fwsratio0; /* 0x010B */
unsigned short int dt0wrsratio0; /* 0x00C4 */
unsigned short int dt0wdsratio0; /* 0x003F */
unsigned short int dt0fwsratio0; /* 0x009F */
unsigned short int dt0wrsratio0; /* 0x0079 */
unsigned int sdram_tim1; /* 0x0888A39B */
unsigned int sdram_tim2; /* 0x26247FDA */
unsigned int sdram_tim3; /* 0x501F821F */
unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */
unsigned int sdram_config; /* 0x61C04AB2 */
unsigned int ref_ctrl; /* 0x00000618 */
unsigned int ioctr_val; /* 0x0000018B */
unsigned int sdram_config; /* 0x61A44A32 */
unsigned int ref_ctrl; /* 0x0000093B */
unsigned int ioctr_val; /* 0x0000014A */
char manu_name[32]; /* "default@303MHz \0" */
char manu_marking[32]; /* "default \0" */
};
struct chip_data {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment