Commit 84d54bc0 authored by Hans de Goede's avatar Hans de Goede

sunxi: display: Disable HDMI support on A13 based tablets

The sun5i die has a hdmi encoder onboard, but the A13 package does not
route this to the outside, disable hdmi support on A13 based boards.
Signed-off-by: 's avatarHans de Goede <hdegoede@redhat.com>
Acked-by: 's avatarIan Campbell <ijc@hellion.org.uk>
parent 86140955
......@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PG0"
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
......
......@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PG0"
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
......
......@@ -9,6 +9,7 @@ CONFIG_USB0_VBUS_PIN="PB04"
CONFIG_USB0_VBUS_DET="PG01"
CONFIG_USB0_ID_DET="PG2"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PG4"
......
......@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=384
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
......
......@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=408
CONFIG_USB0_VBUS_PIN="PG12"
CONFIG_USB0_VBUS_DET="PG1"
CONFIG_AXP_GPIO=y
# CONFIG_VIDEO_HDMI is not set
CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
CONFIG_VIDEO_LCD_POWER="AXP0-0"
CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment