Commit 8d775763 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Tom Rini

ARM: davinci: remove support for cam_enc_4xx

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: default avatarHeiko Schocher <hs@denx.de>
Acked-by: default avatarMarek Vasut <marex@denx.de>
parent a5d338b2
......@@ -18,10 +18,6 @@ config TARGET_DA850EVM
bool "DA850 EVM board"
select SUPPORT_SPL
config TARGET_CAM_ENC_4XX
bool "CAM ENC 4xx board"
select SUPPORT_SPL
config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
select SUPPORT_SPL
......@@ -62,7 +58,6 @@ config SYS_SOC
default "davinci"
source "board/enbw/enbw_cmc/Kconfig"
source "board/ait/cam_enc_4xx/Kconfig"
source "board/Barix/ipam390/Kconfig"
source "board/davinci/da8xxevm/Kconfig"
source "board/davinci/dm355evm/Kconfig"
......
if TARGET_CAM_ENC_4XX
config SYS_BOARD
default "cam_enc_4xx"
config SYS_VENDOR
default "ait"
config SYS_CONFIG_NAME
default "cam_enc_4xx"
endif
CAM_ENC_4XX BOARD
M: Heiko Schocher <hs@denx.de>
S: Maintained
F: board/ait/cam_enc_4xx/
F: include/configs/cam_enc_4xx.h
F: configs/cam_enc_4xx_defconfig
#
# (C) Copyright 2000, 2001, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := cam_enc_4xx.o
This diff is collapsed.
#
# AIT cam_enc_4xx board
# cam_enc_4xx board has 1 bank of 256 MB DDR RAM
# Physical Address: 8000'0000 to 9000'0000
#
# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
#
UBL_CONFIG = $(srctree)/board/$(BOARDDIR)/ublimage.cfg
ifndef CONFIG_SPL_BUILD
ALL-y += u-boot.ubl
else
# as SPL_TEXT_BASE is not page-aligned, we need for some
# linkers the -n flag (Do not page align data), to prevent
# the following error message:
# arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking
# with -N
LDFLAGS_u-boot-spl += -n
endif
/*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*
* (C) Copyright 2008
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
LENGTH = CONFIG_SPL_MAX_FOOTPRINT }
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = CONFIG_SPL_TEXT_BASE;
. = ALIGN(4);
.text :
{
__start = .;
*(.vectors)
arch/arm/cpu/arm926ejs/start.o (.text*)
*(.text*)
} >.sram
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
__rel_dyn_end = .;
} >.sram
.bss :
{
. = ALIGN(4);
__bss_start = .;
*(.bss*)
. = ALIGN(4);
__bss_end = .;
} >.sram
__image_copy_end = .;
.end :
{
*(.__end)
}
}
#
# (C Copyright 2011
# Heiko Schocher DENX Software Engineering hs@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
# Refer doc/README.ublimage for more details about how-to configure
# and create ublimage boot image
#
# The syntax is taken as close as possible with the kwbimage
# UBL special mode : one of
# safe (the board has no nand neither onenand)
MODE safe
# Entry point address for the user bootloader (absolute address)
# nand spl TEXT_BASE = 0x20 !!
ENTRY 0x00000020
# Number of pages (size of user bootloader in number of pages)
# @ nand spl 6 pages
PAGES 6
# Block number where user bootloader is present
START_BLOCK 0
# Page number where user bootloader is present
# Page 0 is always UBL header
START_PAGE 0
LD_ADDR 0x20
CONFIG_ARM=y
CONFIG_ARCH_DAVINCI=y
CONFIG_TARGET_CAM_ENC_4XX=y
CONFIG_SPL=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_SPI_FLASH=y
CONFIG_SYS_PROMPT="cam_enc_4xx> "
......@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
cam_enc_4xx arm arm926ejs - - Heiko Schocher <hs@denx.de>
atstk1003 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
atstk1004 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
atstk1006 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
......
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment