Commit 8e9bb434 authored by Dave Liu's avatar Dave Liu Committed by Wolfgang Denk

ata: make the ata_piix driver using new SATA framework

original ata_piix driver is using IDE framework, not real
SATA framework. For now, the ata_piix driver is only used
by x86 sc520_cdp board. This patch makes the ata_piix driver
use the new SATA framework, so

- remove the duplicated command stuff
- remove the CONFIG_CMD_IDE define in the sc520_cdp.h
- add the CONFIG_CMD_SATA define to sc520_cdp.h
Signed-off-by: default avatarDave Liu <daveliu@freescale.com>
parent c7057b52
......@@ -37,6 +37,9 @@
#ifdef CFG_ATA_PIIX /*ata_piix driver */
extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
extern int curr_device;
#define DEBUG_SATA 0 /*For debug prints set DEBUG_SATA to 1 */
#define SATA_DECL
......@@ -144,19 +147,15 @@ sata_bus_probe (int port_no)
}
int
init_sata (void)
init_sata (int dev)
{
static int done = 0;
u8 i, rv = 0;
for (i = 0; i < CFG_SATA_MAXDEVICES; i++) {
sata_dev_desc[i].type = DEV_TYPE_UNKNOWN;
sata_dev_desc[i].if_type = IF_TYPE_IDE;
sata_dev_desc[i].dev = i;
sata_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
sata_dev_desc[i].blksz = 0;
sata_dev_desc[i].lba = 0;
sata_dev_desc[i].block_read = sata_read;
}
if (!done)
done = 1;
else
return 0;
rv = pci_sata_init ();
if (rv == 1) {
......@@ -207,8 +206,8 @@ init_sata (void)
dev_print (&sata_dev_desc[devno]);
/* initialize partition type */
init_part (&sata_dev_desc[devno]);
if (curr_dev < 0)
curr_dev =
if (curr_device < 0)
curr_device =
i * CFG_SATA_DEVS_PER_BUS + j;
}
}
......@@ -753,134 +752,9 @@ sata_write (int device, ulong blknr,lbaint_t blkcnt, void * buff)
return n;
}
block_dev_desc_t *sata_get_dev (int dev);
block_dev_desc_t *
sata_get_dev (int dev)
int scan_sata(int dev)
{
return ((block_dev_desc_t *) & sata_dev_desc[dev]);
}
int
do_sata (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
switch (argc) {
case 0:
case 1:
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
case 2:
if (strncmp (argv[1], "init", 4) == 0) {
int rcode = 0;
rcode = init_sata ();
if (rcode)
printf ("Sata initialization Failed\n");
return rcode;
} else if (strncmp (argv[1], "inf", 3) == 0) {
int i;
putc ('\n');
for (i = 0; i < CFG_SATA_MAXDEVICES; ++i) {
/*List only known devices */
if (sata_dev_desc[i].type ==
DEV_TYPE_UNKNOWN)
continue;
printf ("sata dev %d: ", i);
dev_print (&sata_dev_desc[i]);
}
return 0;
}
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
case 3:
if (strcmp (argv[1], "dev") == 0) {
int dev = (int) simple_strtoul (argv[2], NULL, 10);
if (dev >= CFG_SATA_MAXDEVICES) {
printf ("\nSata dev %d not available\n",
dev);
return 1;
}
printf ("\nSATA dev %d: ", dev);
dev_print (&sata_dev_desc[dev]);
if (sata_dev_desc[dev].type == DEV_TYPE_UNKNOWN)
return 1;
curr_dev = dev;
return 0;
} else if (strcmp (argv[1], "part") == 0) {
int dev = (int) simple_strtoul (argv[2], NULL, 10);
if (dev >= CFG_SATA_MAXDEVICES) {
printf ("\nSata dev %d not available\n",
dev);
return 1;
}
PRINTF ("\nSATA dev %d: ", dev);
if (sata_dev_desc[dev].part_type !=
PART_TYPE_UNKNOWN) {
print_part (&sata_dev_desc[dev]);
} else {
printf ("\nSata dev %d partition type "
"unknown\n", dev);
return 1;
}
return 0;
}
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
default:
if (argc < 5) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
if (strcmp (argv[1], "read") == 0) {
ulong addr = simple_strtoul (argv[2], NULL, 16);
ulong cnt = simple_strtoul (argv[4], NULL, 16);
ulong n;
lbaint_t blk = simple_strtoul (argv[3], NULL, 16);
memset ((int *) addr, 0, cnt * 512);
printf ("\nSATA read: dev %d blk # %ld,"
"count %ld ... ", curr_dev, blk, cnt);
n = sata_read (curr_dev, blk, cnt, (ulong *) addr);
/* flush cache after read */
flush_cache (addr, cnt * 512);
printf ("%ld blocks read: %s\n", n,
(n == cnt) ? "OK" : "ERR");
if (n == cnt)
return 1;
else
return 0;
} else if (strcmp (argv[1], "write") == 0) {
ulong addr = simple_strtoul (argv[2], NULL, 16);
ulong cnt = simple_strtoul (argv[4], NULL, 16);
ulong n;
lbaint_t blk = simple_strtoul (argv[3], NULL, 16);
printf ("\nSata write: dev %d blk # %ld,"
"count %ld ... ", curr_dev, blk, cnt);
n = sata_write (curr_dev, blk, cnt, (ulong *) addr);
printf ("%ld blocks written: %s\n", n,
(n == cnt) ? "OK" : "ERR");
if (n == cnt)
return 1;
else
return 0;
} else {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
} /*End OF SWITCH */
return 0;
}
U_BOOT_CMD (sata, 5, 1, do_sata,
"sata init\n"
"sata info\n"
"sata part device\n"
"sata dev device\n"
"sata read addr blk# cnt\n"
"sata write addr blk# cnt\n", "cmd for init,rw and dev-info\n");
#endif
......@@ -82,11 +82,9 @@ void msleep (int count);
/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/
#ifdef DRV_DECL /*Driver specific declaration */
int init_sata (void);
int init_sata (int dev);
#endif
#ifdef DRV_DECL /*Defines Driver Specific variables */
struct sata_port port[CFG_SATA_MAXBUS];
block_dev_desc_t sata_dev_desc[CFG_SATA_MAXDEVICES];
int curr_dev = -1;
#endif
......@@ -81,8 +81,8 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_PCI
#define CONFIG_CMD_SATA
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_IDE
#define CONFIG_CMD_NET
#define CONFIG_CMD_EEPROM
......@@ -172,36 +172,14 @@
#define CONFIG_PCNET_79C975
#define PCNET_HAS_PROM 1
/************************************************************
* IDE/ATA stuff
************************************************************/
#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
/*#define CFG_ATA_IDE1_OFFSET 0x0170 /###* ide1 offset */
#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */
#define CFG_ATA_REG_OFFSET 0 /* reg offset */
#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */
#define CFG_ATA_BASE_ADDR 0
#undef CONFIG_IDE_LED /* no led for ide supported */
#undef CONFIG_IDE_RESET /* reset for ide unsupported... */
#undef CONFIG_IDE_RESET_ROUTINE /* no special reset function */
/************************************************************
*SATA/Native Stuff
************************************************************/
#define CFG_SATA_MAXBUS 2 /*Max Sata buses supported */
#define CFG_SATA_DEVS_PER_BUS 2 /*Max no. of devices per bus/port */
#define CFG_SATA_MAXDEVICES (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
#define CFG_SATA_MAX_DEVICE (CFG_SATA_MAXBUS* CFG_SATA_DEVS_PER_BUS)
#define CFG_ATA_PIIX 1 /*Supports ata_piix driver */
/************************************************************
* ATAPI support (experimental)
************************************************************/
#define CONFIG_ATAPI /* enable ATAPI Support */
/************************************************************
* DISK Partition support
************************************************************/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment