Commit 9107ebe0 authored by Jon Loeliger's avatar Jon Loeliger Committed by Wolfgang Denk

board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).

This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
Signed-off-by: default avatarJon Loeliger <jdl@freescale.com>
parent 5e378003
......@@ -65,7 +65,7 @@ int dram_init (void)
}
#ifdef CONFIG_DRIVER_ETHER
#if (CONFIG_COMMANDS & CFG_CMD_NET)
#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac);
UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac);
......
......@@ -4,11 +4,11 @@
#undef CONFIG_PCMCIA
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
......@@ -115,7 +115,7 @@ int pcmcia_hardware_enable(int slot)
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
......
......@@ -761,7 +761,7 @@ static uchar *key_match (uchar *kbd_data)
/*---------------Board Special Commands: PIC read/write ---------------*/
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
/***********************************************************************
F* Function: int do_pic (cmd_tbl_t *cmdtp, int flag,
F* int argc, char *argv[]) P*A*Z*
......
......@@ -5,11 +5,11 @@
#undef CONFIG_PCMCIA
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
......@@ -127,7 +127,7 @@ int pcmcia_hardware_enable(int slot)
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
......
......@@ -6,11 +6,11 @@
#undef CONFIG_PCMCIA
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
......@@ -156,7 +156,7 @@ int pcmcia_hardware_enable (int slot)
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable (int slot)
{
return 0; /* No hardware to disable */
......
......@@ -44,7 +44,7 @@
#error "must define CFG_HUSH_PARSER"
#endif
#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
#if !((CONFIG_COMMANDS & CFG_CMD_FAT) || defined(CONFIG_CMD_FAT))
#error "must define CFG_CMD_FAT"
#endif
......
......@@ -322,7 +322,7 @@ void ide_set_reset (int idereset)
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
void doc_init (void)
{
......
......@@ -88,7 +88,7 @@ void serial_puts (const char *s)
}
}
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
void kgdb_serial_init (void)
{
}
......
......@@ -61,7 +61,7 @@ int dram_init (void)
}
#ifdef CONFIG_DRIVER_ETHER
#if (CONFIG_COMMANDS & CFG_CMD_NET)
#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
/*
* Name:
......
......@@ -471,7 +471,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (strcmp(argv[1], "flash") == 0)
{
#if (CONFIG_COMMANDS & CFG_CMD_FDC)
#if (CONFIG_COMMANDS & CFG_CMD_FDC) || defined(CONFIG_CMD_FDC)
if (strcmp(argv[2], "floppy") == 0) {
char *local_args[3];
extern int do_fdcboot (cmd_tbl_t *, int, int, char *[]);
......@@ -564,7 +564,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
extern void doc_probe(ulong physadr);
void doc_init (void)
{
......
......@@ -39,7 +39,7 @@ void get_backup_values(backup_t *buf);
void show_stdio_dev(void);
void check_env(void);
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
void doc_init (void);
#endif
......
......@@ -132,7 +132,7 @@ int board_init(void)
/*
* NAND flash initialization.
*/
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
extern ulong
nand_probe(ulong physadr);
......
......@@ -31,7 +31,7 @@ extern int mem_test(unsigned long start, unsigned long ramsize,int mode);
void print_vcma9_info(void);
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
typedef enum {
NFCE_LOW,
NFCE_HIGH
......
......@@ -24,7 +24,7 @@
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <nand.h>
......
......@@ -597,7 +597,7 @@ int board_early_init_f(void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
......
......@@ -22,7 +22,7 @@
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <nand.h>
......
......@@ -555,7 +555,7 @@ int board_early_init_f(void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY)
#if ((CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)) && defined(CFG_NAND_LEGACY)
#include <linux/mtd/nand_legacy.h>
......@@ -570,7 +570,7 @@ void nand_init(void)
}
#endif
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_init(void)
{
......
......@@ -4,11 +4,11 @@
#undef CONFIG_PCMCIA
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
......@@ -264,7 +264,7 @@ int pcmcia_hardware_enable(int slot)
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
......
......@@ -595,7 +595,7 @@ int board_early_init_f(void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
......
......@@ -416,7 +416,7 @@ int board_early_init_f(void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
......
......@@ -31,7 +31,7 @@
#include <asm/arch/mem.h>
#include <i2c.h>
#include <asm/mach-types.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
......@@ -847,7 +847,7 @@ void update_mux(u32 btype,u32 mtype)
}
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
void nand_init(void)
{
extern flash_info_t flash_info[];
......
......@@ -202,7 +202,7 @@ void watchdog_reset (void)
enable_interrupts ();
}
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
switch (argc) {
......
......@@ -314,7 +314,7 @@ void ide_set_reset (int idereset)
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
void doc_init (void)
{
......
......@@ -310,7 +310,7 @@ long int initdram (int board_type)
return (psize);
}
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
void doc_init (void)
{
......
......@@ -343,7 +343,7 @@ long int initdram (int board_type)
return (psize);
}
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
void doc_init (void)
{
......
......@@ -29,7 +29,7 @@
#include <command.h>
#include "pn62.h"
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
......
......@@ -26,7 +26,7 @@
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <asm/processor.h>
#include <nand.h>
......
......@@ -80,7 +80,7 @@ void serial_puts (const char *s)
}
}
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
void kgdb_serial_init (void)
{
}
......
......@@ -23,7 +23,7 @@
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <nand.h>
......
......@@ -236,7 +236,7 @@ U_BOOT_CMD(
"address size\n - boot FPGA with gzipped image at <address>\n"
);
#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_PCI)
#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
extern struct pci_controller hose;
extern void pci_ixp_init(struct pci_controller * hose);
......
......@@ -4,11 +4,11 @@
#undef CONFIG_PCMCIA
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
......@@ -123,7 +123,7 @@ int pcmcia_hardware_enable(int slot)
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
......
......@@ -837,7 +837,7 @@ void show_boot_progress (int status)
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
#if (CONFIG_COMMANDS & CFG_CMD_SPI)
#if (CONFIG_COMMANDS & CFG_CMD_SPI) || defined(CONFIG_CMD_SPI)
#define SPI_ADC_CS_MASK 0x00000800
#define SPI_DAC_CS_MASK 0x00001000
......
......@@ -31,7 +31,7 @@
#include <common.h>
#include <s3c2410.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand.h>
#endif
......@@ -136,7 +136,7 @@ int dram_init (void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
extern ulong nand_probe(ulong physadr);
static inline void NF_Reset(void)
......
......@@ -23,7 +23,7 @@
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <asm/processor.h>
......
......@@ -219,7 +219,7 @@ static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
return 1;
}
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
......
......@@ -368,7 +368,7 @@ void reset_phy (void)
/*-----------------------------------------------------------------------
* Board Special Commands: access functions for "PUMA" FPGA
*/
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
#define PUMA_READ_MODE 0
#define PUMA_LOAD_MODE 1
......
......@@ -33,7 +33,7 @@
# include <status_led.h>
#endif
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
......@@ -75,7 +75,7 @@ int checkboard (void)
/* ------------------------------------------------------------------------- */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#error "SXNI855T has no PCMCIA port"
#endif /* CFG_CMD_PCMCIA */
......@@ -327,7 +327,7 @@ int misc_init_r (void)
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
void nand_init(void)
{
unsigned long totlen = nand_probe(CFG_DFLASH_BASE);
......
......@@ -65,7 +65,7 @@ long int initdram (int board_type)
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
#if (CONFIG_COMMANDS & CFG_CMD_SPI) && CONFIG_NIOS_SPI
#if ((CONFIG_COMMANDS & CFG_CMD_SPI) || defined(CONFIG_CMD_SPI)) && CONFIG_NIOS_SPI
#define SPI_RTC_CS_MASK 0x00000001
......
......@@ -46,7 +46,7 @@ typedef struct {
extern led_dev_t led_dev[];
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int led_id = 0;
......
......@@ -112,7 +112,7 @@ void hw_watchdog_reset(void)
enable_interrupts ();
}
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
......
......@@ -574,7 +574,7 @@ int board_early_init_f(void)
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
......
......@@ -153,7 +153,7 @@ long int initdram (int board_type)
return (size_b0 );
}
#if (CONFIG_COMMANDS & CFG_CMD_DOC)
#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
void doc_init (void)
{
......
......@@ -29,7 +29,7 @@
#include <common.h>
#include <command.h>
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
#define DEFAULT_VOL 45
......
......@@ -29,7 +29,7 @@
#include <common.h>
#include <command.h>
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
#if defined (CONFIG_TB5200)
#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL
......
......@@ -1065,7 +1065,7 @@ int update_flash_size (int flash_size)
}
#endif
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <linux/mtd/mtd.h>
......
......@@ -46,7 +46,7 @@
#error "must define CFG_HUSH_PARSER"
#endif
#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
#if !((CONFIG_COMMANDS & CFG_CMD_FAT) || defined(CONFIG_CMD_FAT))
#error "must define CFG_CMD_FAT"
#endif
......
......@@ -32,7 +32,7 @@
* TRAB board specific commands. Especially commands for burn-in and function
* test.
*/
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
/* limits for valid range of VCC5V in mV */
#define VCC5V_MIN 4500
......@@ -846,7 +846,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int contact_temp;
int delay = 0;
#if (CONFIG_COMMANDS & CFG_CMD_DATE)
#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE)
struct rtc_time tm;
#endif
......@@ -862,7 +862,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
spi_init ();
while (1) {
#if (CONFIG_COMMANDS & CFG_CMD_DATE)
#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE)
rtc_get (&tm);
printf ("%4d-%02d-%02d %2d:%02d:%02d - ",
tm.tm_year, tm.tm_mon, tm.tm_mday,
......
......@@ -148,7 +148,7 @@ static int rs485_receive_chars (char *data, int timeout);
static unsigned short updcrc(unsigned short icrc, unsigned char *icp,
unsigned int icnt);
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
static int trab_eeprom_read (char **argv);
static int trab_eeprom_write (char **argv);
int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
......@@ -959,7 +959,7 @@ static int touch_check_pressed (void)
static int touch_write_clibration_values (int calib_point, int x, int y)
{
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
int x_verify = 0;
int y_verify = 0;
......@@ -1105,7 +1105,7 @@ static int rs485_receive_chars (char *data, int timeout)
int do_serial_number (char **argv)
{
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
unsigned int serial_number;
if (strcmp (argv[2], "read") == 0) {
......@@ -1139,7 +1139,7 @@ int do_serial_number (char **argv)
int do_crc16 (void)
{
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
int crc;
unsigned char buf[EEPROM_MAX_CRC_BUF];
......@@ -1260,7 +1260,7 @@ int do_gain (char **argv)
int do_eeprom (char **argv)
{
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
if (strcmp (argv[2], "read") == 0) {
return (trab_eeprom_read (argv));
}
......@@ -1278,7 +1278,7 @@ int do_eeprom (char **argv)
#endif /* CFG_CMD_I2C */
}
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
static int trab_eeprom_read (char **argv)
{
int i;
......
......@@ -4,11 +4,11 @@
#undef CONFIG_PCMCIA
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
......@@ -123,7 +123,7 @@ int pcmcia_hardware_enable(int slot)
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
......
......@@ -24,7 +24,7 @@
#include <common.h>
#include <command.h>
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
#include "vpd.h"
......
......@@ -122,7 +122,7 @@ serial_puts(const char *s)
}
}
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
void
kgdb_serial_init(void)
{
......
......@@ -22,7 +22,7 @@
#include <common.h>
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
#ifdef CONFIG_NEW_NAND_CODE
#include <nand.h>
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment