Commit 9ae55ccf authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: enable -O2 in lib_generic/ for ADI/Bluetechnix boards

Building the compression code in lib_generic/ with -O2 rather than -Os
gives a nice speed boost without too much code size increase.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent fea63e2a
...@@ -26,5 +26,8 @@ ...@@ -26,5 +26,8 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,5 +26,8 @@ ...@@ -26,5 +26,8 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,5 +26,8 @@ ...@@ -26,5 +26,8 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
......
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1 LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
......
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,5 +26,8 @@ ...@@ -26,5 +26,8 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 LDR_FLAGS-BFIN_BOOT_PARA := --dma 6
LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1 LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1
......
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
...@@ -26,6 +26,9 @@ ...@@ -26,6 +26,9 @@
# This is not actually used for Blackfin boards so do not change it # This is not actually used for Blackfin boards so do not change it
#TEXT_BASE = do-not-use-me #TEXT_BASE = do-not-use-me
CFLAGS_lib_generic += -O2
CFLAGS_lzma += -O2
# Set some default LDR flags based on boot mode. # Set some default LDR flags based on boot mode.
LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE)) LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment